• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.576-584
• /
• 2003

This paper presents a new control method of single-phase active power filter(APF) for the compensation of harmonic current components in nonlinear loads. Constructing a imaginary second-phase giving time delay to load currents, making single-phase system into the system that has two phases, complex calculation is possible. In the previous method, it made a imaginary-phase lagged to the load current T/4(here T is the fundamental cycle), but in proposed method, the new signal, which has the delayed phase through the filter, using the phase-delay property of low-pass filter, was used to the second phase. Instantaneous calculation of harmonic current is possible, because two phase have different phase. In this paper, it was done with instantaneous calculation using the rotating reference frames(RRF) that synchronizes with source-frequency, a reference of compensation currents, not applying to instantaneous reactive power theory which uses the existed fixed reference frames. The simulation and experiment about R-L loads using the current source were carried out, and the effect of the proposed method was preyed through the result of this experiment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1327-1334
• /
• 2014

Linear form of public works such as roads, railways and rivers, generally used as long work crossing administrative districts, can be several hundreds km length and narrow. These linear forms use SCM sheets, which do not include the quadrangle shape, to make a public announcement of topographical drawing in order to get the work approval. the Integrated measurement channel investigation and cadastral act that are established in 2009 apply the ITRF for the composition of design and construction books and coordinates of topographical map in order to get the work approval. However according to the article 5 of additional clause, while the cadastre is maintaining local coordinates, if there is a technical error in the content of the Public Announcement of Topographical Drawing that used the SCM, the question of responsibility of land borders and the efficacy or not of the announcement is raised as an administrative measure. After analysing the causes and enforcing coordinate conversion and correction taking into account linear form work's features, the result was reflected in the existing SCM. As a conclusion, the present study proposes the improvement of the procedures of the Public Announcement of Topographical Drawing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.209-216
• /
• 2006

This study is to analyse the characteristics of bar migration, which is important roles to bank erosion and meandering development, for the meandering channels with erodible bed by using a 2-D numerical model in the generalized coordinate systems. The results of the numerical experiments showed that the features of bar migration were affected by the meandering wavelength to the width ratio, and had a relatively good agreement with the criterion for bar migration through a bend suggested by Kinoshita and Miwa (1974). The bar migrated with speed in the channel with long wavelength and broad width, and the criterion for bar migration was increased. The bar celerity was decreased abruptly near the criterion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.837-842
• /
• 2009

The efficient dynamic modeling of a satellite with flexible solar arrays is established by using the component mode synthesis technique. A flexible satellite model can be defined as the assembly of two sub-structures, central body and solar array. The reduced models of each substructure, which are expressed in each local frame, are coupled with respect to the satellite reference frame. The dynamic modeling method is applied to the numerical example of a satellite with a single solar array, and is verified by investigating the transfer function results with considering the solar array rotation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.461-464
• /
• 1998

수중 프로펠러의 비공동 소음을 수치적으로 해석하였다. Ffowcs Williams-Hawkings 형태의 음향상사 방정식을 시간영역에서 해석하였으며 임의의 형상과 하중조건을 가지는 프로펠러의 소음 예측이 가능하도록 하였다. 또한 좌표계 변환을 통해 관찰자에 대해 상대적 운동이 있는 경우에도 소음 예측이 가능하도록 하였다. 균일/비균일 유입류 조건을 갖는 수중 프로펠러에 대해 소음 해석을 수행하였고 각각의 조건에 대해 음원별 소음 강도와 방향성을 예측하였다. 수치 해석결과 프로펠러 표면상의 압력 변화에 따른 비정상 하중에 의한 이중극 소음이 지배적인 것으로 나타났다. 이러한 음원별 접근법은 수중 프로펠러의 운용시 지배적인 소음원을 구별하고 그 특성을 파악하여 적절한 소음 제어책을 마련하는 기반이 될 것이다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.478-483
• /
• 2003

대상물의 인식 및 위치 검출에는 영상처리기술이 많이 응용되고 있다. 로봇의 작업성능은 대상물의 위치를 얼마나 정확하게 인식하고 검출하느냐가 가장 중요하다. 그러나 작업현장에서 대상물의 배치, 크기 및 형상 등이 일정하지 않고 작업환경 또한 다양하여 외부의 영향을 많기 받기 때문에 정확한 로봇의 시각장치 개발은 매우 중요하다. 영상 시스템을 이용하여 작업하고자 하는 대상체의 3차원 위치 정보를 얻기 위해서 가장 널리 쓰이고 있는 방법이 카메라 2대를 이용할 스테레오 비전이다 하지만 정확한 3차원 정보를 얻기 위해서 세밀한 보정이 필요한 실정이며 보정에 있어서도 두 카메라의 물리적 특성에 의한 오차가 발생한다. (중략)

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.11-12
• /
• 2011

본 논문에서는 PWM 인버터에 적합한 새로운 데드타임 보상방법을 제안한다. 최근 PWM 인버터는 교류전동기, 분산전원용 계통연계 시스템 등의 다양한 산업에 사용되고 있다. 그러나 사용되는 전력용 소자의 비선형적인 특성과 데드타임에 의해 전기의 품질이 저하되고 전류에 고조파가 발생하게 된다. 데드타임에 의한 고조파는 정지좌표계 상에서 제 5, 7고조파 동기좌표계상에서 제 6 고조파가 가장 현저하다. 이 논문에서는 동기좌표계 상에서 공진제어기를 사용하여 제 6고조파를 보상하는 방법을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.358-359
• /
• 2011

본 논문에서는 PWM 인버터에 적합한 새로운 데드타임 보상방법을 제안한다. 최근 PWM 인버터는 교류전동기, 분산전원용 계통연계 시스템 등의 다양한 산업에 사용되고 있다. 그러나 사용되는 전력용 소자의 비선형적인 특성과 데드타임에 의해 전기의 품질이 저하되고 전류에 고조파가 발생하게 된다. 데드타임에 의한 고조파는 정지좌표계 상에서 제 5, 7고조파 동기좌표계상에서 제 6 고조파가 가장 현저하다. 이 논문에서는 동기좌표계 상에서 공진제어기를 사용하여 제 6고조파를 보상하는 방법을 제안한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.327-335
• /
• 1998

Many kinds of map projection have been used, since this cannot be done without a distortion and seemless representation of the globe. To overcome the continues representation of large digital terrain information by the global coordinate system , to find out the sources of projection error and optimizing method, and to increase the map accuracy, specific map projection researches are needed. In this study, improvements of map projections are suggested for small scale mapping which covering entire Korean peninsula based on theoretical evaluation and limits of current map projection. Furthermore, distortion factors, positional errors, and accuracy increasing method are evaluated.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.19-26
• /
• 1991

The complete, fully-elliptic Reynolds-averaged Navier-Stokes equations have been solved using a two-layer model, in the $\kappa-\varepsilon$ turbulence model, for the axisymmetric body. Numerically generated boundary-fitted coordinate system and the finite analytic methods are used to solve the governing equations. Calculations are started after the middle body with given inlet conditions. The velocities and the turbulent quantities at the inlet section are specified by solving the boundary layer equations or by standard flat-plate boundary profiles. The effects of the inlet conditions on the solution are investigated.