• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.116-125
• /
• 2022

Recent aspects of terrorism varies in various ways according to means, targets, and regions. In particular, the 9/11 terrorist attacks in the United States in 2001 changed the paradigm of each country's terrorism, and the South Korea also participated in the enactment and enforcement of the Anti-Terrorism Act in 2016. Based on this, CBRN terrorism is included in general terrorism, and the National Police Agency plays the role of a control tower, and a system supported by related organizations such as the Ministry of Environment is being built and operated. However, restrictions were confirmed in the organizational system, manpower composition, and equipment and materials in operation in preparation for CBRN within the police. Based on the identified limitations, we proposed improvement plans to strengthen the capacity for CBRN terrorism: establishing a dedicated CBRN organization; creating research organization; and securing additional dedicated personnel. Based on this, as an improvement plan to strengthen the capability of CBRN, the establishment of an organization dedicated to CBRN and a research organization within the National Police Agency, and expansion of electronic equipment suitable for the characteristics of CBRN were proposed. It is expected that the police's on-site response capability system for CBRN terrorism will be strengthened via the proposed improvement measures to recover the various restrictions on the response to CBRN terrorism.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.431-439
• /
• 2022

In this study, Neutralized red mud(LRM+S) at a pH of 6-8 was prepared by adding sulfuric acid to liquefied red mud(LRM) at a pH of 10~12. After adding LRM and LRM+S to the cement paste, the hydration heat, compressive strength, and hydration products were examined. The observed accumulated hydration heat revealed that the calorific value of the cement paste with LRM was low and its and peak was delayed when compared with that of plain cement paste(referred to as Plain), whereas the calorific value of the cement paste with LRM+S was similar to that of Plain. At the age of 28 days, the compressive strength of the cement paste with 20% LRM was 55% of the strength of Plain. Using X-ray diffraction, it was determined that the cement paste with 20% LRM exhibited a Ca(OH)₂ peak after 3 days, whereas the cement paste with 20% LRM+S and Plain exhibited a Ca(OH)₂ peak after an hour. Thus, the strength degradation of cementitious materials was improved by adding neutralized red mud prepared by adjusting the pH of highly alkaline LRM with sulfuric acid.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1128-1141
• /
• 2021

'Angelica' is one of the most traditionally consumed medicinal herbs around Northeast Asia including Korea for treatments of various diseases or health care purposes like hematopoiesis, blood circulation for women, sedative, analgesic, and a tonic medicine etc. Angelica gigas Nakai, a Korean native species of Angelica, is clearly different from the others in containing a high concentration of active ingredients like pyranocoumarines including decursin, decursinol, and decursinol angelate. These compounds have various kinds of positive effects such as anti-tumor activity including the precaution of neutropenia occurred during anticancer drug administration, improvements of metabolic disorders, menstrual irregularity, impairment of renal function, respiration improvement, cognition-enhancement, anti-inflammatory effect, anti-oxidative effect, enhancing fertility and so forth. Thus it implies incredible potentialities in future development for foods and drugs. However, certain purity-related qualities and/or overdose in food products can cause side effects like toxicities; therefore, their safety profiles should also be considered. This review focuses on the positive and negative effects of three pyranocoumarines in Angelica gigas Nakai and some possibilities and considerations for future food and drug products development.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This study was performed to determine the characteristics of particleboard made from three-months-old bamboo, (Phyllostachys nigra var henonis Stapf) grown in Damyang district, Korea. Total 60 particleboards were manufactured with 1% of liquid wax emulsion using urea-formaldehyde resin content 9%,11% and 13%, respectively. The particle boards consisted of three layers, in which face layer had the same proportion of a weight 25% of the particleboard each. And the core layer had a weight 50% of the board. The core layer and face layer had the particle dimension passing 6 mesh (3.35 mm), 12 mesh (1.70 mm), respectively. The study was carried out to determine the effect of the growing time of 3 months and 3 years on particleboard properties. The physical and mechanical properties of boards were measured and compared to the Korean standard (KS) requirements of particle boards. The results were as follows; 1. The longer the growing time, the higher the density of bamboo. Density of the upper part of bamboo showed higher than that of lower part. 2. Density and moisture content of the two particle boards did not show significant differences. Three-months-old bamboo particleboard gave higher thickness swelling than three-years-old bamboo particleboard. Bamboo particleboard passed the thickness swelling test of KS. 3. The static bending and internal bond strength of three-months-old bamboo particleboard were higher than those of three-years-old bamboo. Increase of resin contents in bamboo particleboard increased bending and internal bond strength, proportionally. Strength properties of bamboo particle board were above KS. 4. Formaldehyde emission of all the bamboo particleboards satisfied E₂ level (5.0 mg/L) of KS F 3104.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.263-278
• /
• 2022

This paper contains experimental study for the development and performance of TBM backfill material with thixotropic properties. The LW backfill material is widely applied to fill the cavity on the back side of the shield TBM excavation, but has disadvantages such as settlement caused by strength reduction, material separation by groundwater, and reduced plasticity. In this paper, laboratory tests and a model test were conducted to assess the performance of inorganic thixotropic backfill material proposed to improve these problems. The results of laboratory tests show that 1 hr-uniaxial compressive strength of ITB was 12 times higher than LW, and the rate of bleeding of 20 hr was 8.3 times lower, and the result of flow table test was more than 27 times higher. This result indicated that the inorganic thixotropic backfill material has superior properties to LW backfill in terms of strength reduction, material separation, and thixotropy. In the model experiment, a model injection device tester was manufactured and the injection performance and filling rate were verified. When material was injected in the water, it was visually checked whether material separation occurred, and it was confirmed that the filling rate was 96% or more. Comparison results with the test of LW and ITB materials was concluded that ITB can reduce the material separation by groundwater and the occurrence of tunnel cavity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.427-438
• /
• 2022

With the recent growing importance over safety management the need for advanced and technical approaches for on-site safety inspection methods has increased. Railway construction is subject to its own particular set of temporal and spatial challenges due to its unique facilities and equipment. This study aimed to investigate the field characteristics of railway infrastructure and improve the conventional field safety management methods by identifying the most appropriate features of AR technology. Group interviews and surveys were conducted with field safety experts to derive the major problems and inspection needs. Subsequently, various features of AR, such as BIM model projection, and remote conferencing, were investigated to determine their applicability to address safety issues. As a result, four problems in the current safety management process, such as 'lack of time due to the conventional inspection method and inspection of areas that are difficult to access', and three major inspection types, such as 'observance of work procedures, status of installation, adequate dimensional spacing', were identified to be improved when adopting AR based techniques. Furthermore, AR technology utilizing plans to solve safety inspection problems and effectively manage major inspection types were proposed, and a follow up survey was conducted with the same field safety experts to derive the priority of technology development.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1106-1115
• /
• 2021

In this study, a fin that controls ship stern flow was attached on stern hull of a 80k bulk carrier to improve resistance performance. The rectangular cross-sectional fin was attached at several locations on the hull, and angle to streamline was changed with constant length, breadth, and thickness. The resistance performance and wake on propeller plane of the hull with and without the fin were analyzed using model-scale computational fluid dynamics simulation. The analysis results were extrapolated to full-scale to compare the performance and wake of the full-scale ship. First, the fin changed path of bilge vortex that flowed into the propeller along the stern hull without the fin to transom stern. This change increased pressure of the stern hull and upper region of the propeller, so pressure resistance and total resistance of the hull were reduced - the nearer the fin location to after perpendicular (AP) and base line of the hull, the larger the reduction of the resistances. Second, nominal wake fraction of the hull with the fin was lower than that without the fin. This dif erence was in proportion to the angle of the fin, but the total resistance reduction was in proportion until a certain angle at which the reduction was maximum. The largest total resistance reduction was approximately 2.1% at 12.5% of length between perpendiculars from the AP, 10% of draft from the base line, and 14° with respect to the streamline.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.101-109
• /
• 2022

This study describes the results of model experiment to analyze the effect of backfill material types on the behavior of underground facility. In the model experiment, backfill materials around the existing underground facility were applied with soil (Jumunjin standard sand) and CLSM. The displacement of underground facility was analyzed for each excavation stage considering the separation distance between the excavation surface and the backfill area based on the experimental results. When soil was applied as a backfill material, the soil on the back of the excavation surface collapsed by excavation and formed an angle of repose, and the process of slope stability was repeated at each excavation stage. In addition, the displacement of underground facility began to occur in the excavation stage that the failure line of soil passes the installation location of the underground facility. When CLSM was applied as a backfill material, there was almost no horizontal and vertical displacement of the ground regardless of the separation distance from the excavation surface even when excavation proceeded to the backfill depth. Therefore, this result showed that it can have a resistance effect against the lateral earth pressure generated and the collapse of the original ground by adjacent excavation, if a backfill material with high stiffness such as CLSM is applied.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.270-273
• /
• 2022

The present study investigated the optimum additive ratio of wheat straw pellet as a substitute for beet pulp during oyster mushroom cultivation. The chemical properties across treatments were pH of 4.8-5.5, total carbon content of 45.9-46.5%, total nitrogen content of 1.5-1.7%, and carbon-to-nitrogen ratio of 27.8-31.0. Mycelial growth was the fastest in a medium containing 20% wheat straw pellet (at 88.2 mm in 'Heuktari' and 70.3-79.6 mm in 'Suhan-1Ho'); however, there were no significant differences in mycelial density among the treatments. The characteristics of fruiting bodies by variety were as follows. In 'Heuktari', the valid stipe number per bottle (1,100 cc) was 22.5 and yield was 177.1 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls. In 'Suhan-1Ho', the valid stipe number per bottle (1,100 cc) was 14.0 and yield was 151.2 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1013-1024
• /
• 2022

In addition to the assessment measure of electric quality levels, load loss are also a factor in hindering the financial profits of electrical sales companies. Therefore, accurate analysis of load losses generated from distributed power networks is very important. The accurate calculation of load losses in the distribution line has been carried out for a long time in many research institutes as well as power utilities around the world. But it is increasingly difficult to calculate the exact amount of loss due to the increase in the congestion of distribution power network due to the linkage of distributed energy resources(DER). In this paper, we develop smart grid big data infrastructure in order to accurately analyze the load loss of the distribution power network due to the connection of DERs. Through the preprocess of data selected from the smart grid big data, we develop a load loss analysis model that eliminated 'veracity' which is one of the characteristics of smart grid big data. Our analysis results can be used for facility investment plans or network operation plans to maintain stable supply reliability and power quality.