• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.383-388
• /
• 2005

To install a radar reflector on small ships, such as a small fishing vessel, a fishery buoy, and a barge ship for fishery, it is very important to develop the optimal system which may determine a proper installation location. For this, the response characteristics how waves have an effect on the small ships should be accurately analyzed. In this paper, we analyze the dynamic behaviors of small ships, which may be caused by irregular waves. To do this, we investigate how a barge ship responses to wavelength, water depth, and directions of incoming waves. The analyzed results shall be utilized to evaluate an effect on a radar cross section when we install an radar reflector on a barge ship for fishery and a small ship.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.393-400
• /
• 2006

This study is intended to examine the characteristics of driver in the use of guide sign in urban areas. The good and bad points about guide sign based on landmark point and guide sign based on street name are demonstrated, and driver's preference between them are studied. The questionnaires given to general persons deal with general guide signs and road maps, and are designed to see if they can find out current location on the road map with guide sign. According to the results, drivers prefer guide sign based on street name to guide sign based on landmark. And guide sign based on street name took less time to find current location than with guide sign based on landmark.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.740-743
• /
• 2004

Rheological properties of gamma-irradiated arrowroot starch was examined to utilize as fundamental research data far processing. Irradiated arrowroot starch solutions (3, 4, 5, 6%) were gelatinized at $95^{\circ}C$ for 40 min, and its flow properties measured using rheometer at $30^{\circ}C$ and 10 to 200 rpm rotation rate. Rheological parameters of irradiated arrowroot starch gelatinized solution were calculated using Herschel-Bulkley equation. Gelatinized arrowroot starch solutions irradiated at $0^{\circ}C$ and 5kGy showed pseudoplastic fluid behavior, while those irradiated at 10, 20, and 30kGy were the dilatant with ${\tau}_y=0$ (yield stress).

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.302-311
• /
• 2014

In this work, a FTTL (fishbone-type transmission line) structure was fabricated on PES (polyether sulfone) for a realization of transparent flexible wireless communication device, and its RF characteristics were investigated. According to the results, the FTTL on PES showed a short wavelength characteristic compared with conventional coplanar waveguide. Concretely, the wavelength of the FTTL was 2.23 mm at 50 GHz, which was 56.6 % of the conventional coplanar waveguide. According to the bandwidth extraction result, the passband of the FTTL on PES was 608 GHz. Unlike conventional periodic structures, the characteristic impedance of the FTTL on PES showed a very low frequency dependency, which means that the FTTL on PES can be used for application to transmission line and distributed passive components with a broadband operation frequency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.353-361
• /
• 2016

This work presents an investigation of the radio frequency characteristics of an FTLPGS (fishbone-type transmission line employing periodic ground structure) fabricated on PES (polyether sulfone) for the realization of a transparent flexible wireless communication device. According to the results, the FTLPGS on PES showed a shorter wavelength characteristic when compared with a conventional coplanar waveguide. Concretely, the wavelength of the FTLPGS was 1.91 mm at 50 GHz, which was 48.5% of the conventional coplanar waveguide. The bandwidth extraction result showed that the passband of the FTLPGS on PES was 250 GHz. Unlike conventional periodic structures, the characteristic impedance of the FTLPGS on PES also showed a very low frequency dependency. A miniaturization of the RF circuit on the PES substrate was made possible by the FTLPGS on PES having shown characteristic impedance lower than that of conventional transmission lines. These results mean that, with a broadband operation frequency, the FTLPGS on PES is a suitable construction application for the transmission line and distributed passive components.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.160-161
• /
• 2006

본 연구는 살균선 및 오존선을 방사하는 저압 자외선램프를 이용하여 한약재 살균 및 장기간의 보관에 따른 변질 원인을 제거하고, 고품질 유지를 위한 것이다. 본 연구에서는 이미 발표한 오존 및 전기적 특성을 연구한 '오존램프를 이용한 약재 보관 특성(1)'에 이어서, 주로 약재 보관 특성의 관점에서 연구를 하였다. 대구 약전골목에서 현재 가장 많이 사용되고 유통되고 있는 작약, 백출, 왕기, 감초, 당귀를 실험에 이용 하였으며, 오존램프 보관 유무에 따른 약재의 외관상의 변화, 일반성분의 변화, 생리활성 물질의 변화 등 특성 평가를 연구하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.343-345
• /
• 2003

본 논문에서는 색상 정보와 변형 모델을 이용한 얼굴 영역 및 얼굴의 특징 영역의 자동 검출 방법을 제시한다. 영상으로부터 획득할 수 있는 정보 중 가장 빠르고 쉽게 얻을 수 있는 정보가 색상 정보이며, 색상정보는 사물을 판단함에 있어서 가장 효율적이면서 컴퓨터의 계산량을 줄일 수 있다는 장점을 갖고 있기 때문에 얼굴 영역 검출 방법으로 많이 이용되고 있다. 본 연구에서는 얼굴영역 및 얼굴 특성 추출함에 있어 컬러모델 사용 시 외부 조명의 영향을 줄여주는 조명 보정 방법을 제시하고, 조명 보정에 의해 평활화된 YCbCr 색상모델에 적용하여 각 성분 특성을 고려한 얼굴영역 및 얼굴의 특성 영역에 해당하는 후보 영역을 검출하는 방법을 제시한다. 검출된 얼굴후보 영역 및 특성 영역은 가변 모델인 동적 윤곽선 모델의 초기값으로 자동 적용되어 윤곽선 모델 적용시 문제점가운데 하나인 초기값 설정문제를 해결함과 동시에 얼굴 및 얼굴 특징 정보의 정확한 윤곽선을 추출하는데 사용된다. 실험 결과 제시된 방법을 적용한 결과 빠르고 효과적으로 얼굴 및 특성 영역을 검출 할 수 있음을 입증 할 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.264-265
• /
• 2013

현재 반도체 산업에서는 고성능 저전력과 더불어 고 집적도가 가능한 재료 및 구조에 크게 주목하고 있고 여러 가지 이슈를 만족시키기 위해서 다양한 재료와 구조가 많이 연구 되고 있다. 특히 3-5족 화합물로 만들어진 나노선은 소자의 미세한 구조적 제어를 가능하게 하고 1차원 구조적 특성에 의해 전기적 특성이 우수하여 전계효과 트랜지스터(FET) 소자에 적용 시키기 적합하다고 알려져 있다.[1,2] 이번 연구에서는 최근 많이 연구되고 있는 GaAs 나노선을 기반으로 하는 전계효과 트랜지스터의 소자특성 및 전기적인 특성에 대해 EDISON 시뮬레이터를 이용해 알아보았다. 또한 채널 두께 및 길이와 게이트 산화막 층 두께에 따른 소자의 전기적 특성에 대해서도 연구하였다. 이를 통해 GaAs 나노선 기반 전계효과 트랜지스터의 최적화된 소자를 알아 보았다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.286-291
• /
• 2011

Directional couplers are widely used in RF and microwave applications to distribute or monitor signals. This paper presented a new structure of microstrip branch line directional coupler with coupled lines. The loose couplings of microstrip branch line directional couplers are impractical for the high characteristic impedance values required for the shunt branches. To overcome this limitation, the parallel coupled lines with the shorts were used for the high characteristic impedance. The results of the simulations and measurements were presented for the proposed branch line directional coupler. Measurement of the 10 dB branch line directional coupler shows that the return loss is higher than 30 dB over 10 % bandwidth and the isolation is 35 dB or better over 8 % bandwidth.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.122-128
• /
• 2017

In order to simplify the wiring of construction heavy equipment, researches on PLC(Power Line Communication)-CAN(Controller Area Network) communication module are actively proceeding. Even if a PLC-CAN communication module is developed, a simulator capable of judging whether the PLC-CAN communication module is operating normally is needed. In this paper, we designed and developed a simulator that can measure the status of PLC-CAN communication module. We analyzed the characteristics of the power line communication frequency band by analyzing the characteristics of the power line and compared the noise characteristics with the passenger car in order to characterize the heavy equipment noise.