• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1390-1396
• /
• 2003

본 연구는 타이트 스커트의 트임의 개수가 왼쪽 옆선에 1개 있을 때와 왼쪽 옆선, 오른쪽 옆선에 각각 1개씩 모두 2개 있을 때 평지 보행, 계단 승강, 버스 승강 등과 같은 일상동작에 잘 적응할 수 있는 타이트 스커트의 적정 트임 길이를 설정하는 것을 목표로 하였다. 아울러 각 동작시의 트임 길이에 따른 생리적인 반응을 의복압, 산소 섭취량을 통해 알아보고자 하였다. 평균보폭은 4m 구간을 평상시대로 걸을 때의 발자국간 평균거리를 이용하였으며 국민표준체위조사보고서(1997)에 의한 평균체형을 가진 9명의 피험자를 정하였다. 스커트의 형태는 무릎길이인 타이트 스커트로 정하였다. 스커트의 트임은 왼쪽 옆선에 1개 있는 경우와 왼쪽 옆선, 오른쪽 옆선에 각각 1개씩 있는 경우의 2종류이다. 트임이 1개인 스커트는 2cm 간격으로, 트임이 2개인 스커트는 1cm 간격으로 트임 위치를 표시하여 길이를 조정하였다. 적정 트임 길이는 Likert 척도에 의한 만족도 평가로 측정하였으며 의복압은 air-bag system으로, 산소 섭취량은 Quark $B^2$ 으로 측정하였다. 본 연구의 결과는 다음과 같다. 1. 스커트의 최소 적정 트임 길이는 트임 1개일 때 평지 보행시 4cm, 계단 승강시 12cm ,버스 승강시 18cm이며, 트임 2개일 때 평지 보행시 2cm, 계단 승강시 8cm, 버스 승강시 15cm로 나타났다. 2. 의복압의 경우, 동일 트임 길이에서 트임 1개의 의복압이 트임 2개의 의복압보다 높았지만 트임 개수에 따른 전체 트임 길이로 보면 트임 1개의 의복압이 트임 2개의 의복압 보다 낮게 나타났다. 동작별로는 버스 승강의 의복압이 가장 높고 계단 승강, 평지 보행 순으로 낮아졌다. 3. 산소 섭취량의 경우, 동일 트임 길이에서 트임 1개와 트임 2개의 산소 섭취량은 거의 비슷하였다. 트임 개수에 따른 전체 트임 길이로 보면 트임 1개의 산소 섭취량이 트임 2개의 산소 섭취량보다 낮게 나타났다. 동작별로는 버스 승강의 산소 섭취량이 가장 높고 계단 승강, 평지 보행 순으로 낮아졌다.

• Korean Architects
• /
• s.659
• /
• pp.94-101
• /
• 2024

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.8
• /
• pp.1132-1141
• /
• 2004

The purpose of this research was to ascertain the optimum rear slit length of tight skirts in terms of comfort and appearance. The typical measurements of tight skirts on current market were recorded and a questionnaire survey of women in their twenties was conducted in order to find out the current conditions of the skirts and specific complaints about motion restrictions. Just over half the respondents (50.4%) reported that they had experienced damage to the slit usually when they were stepping on a bus and also walking and running. The clothing test showed that the slit length increased as the motion went from "walking" to "going up stairs", and to "stepping on a bus" In addition the slit length significantly decreased as the hem circumference of skirt became wider. On the basis of those results, a wearing test, evaluating sensual comfort and appearance, was also conducted and the results showed that the slit length of 385mm was most prefered.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.120-136
• /
• 2008

This study examined sewing methods used to reinforce the opening of clothes of the Joseon period. Through the analysis of a total of 117 clothing items of the Joseon period, the following results were obtained. 1. Most costumes of the Joseon period had the opening. The purpose of the opening was to allow one to put on and take off a costume, act comfortably, and turn a costume Inside out. The opening was located on the Side, Conte. Back, fgwi(Side opening of pants), Wristband, Armhole, and Godae(the bark part of the collar). 2. As the opening tended to get easily worn out, it was often reinforced. The 1911owing three methods were used to reinforce the opening of clothing items of the Joseon period: a method to attach a cloth such as Dang, Binding, and Badae; a method using a variety of knots; and a method by sewing stitches such as a sort of cross stitch called Satteugi, Prick stitch, and Loop. 3. The most frequently used reinforcing method was the one that used a knot(34 items), followed by the one by sewing Satteugi(27 items), and the one using Dang(25items). The most frequently detected location of the opening was Side(59 items), followed by Agui(37 items), Wristband(19 items), and Center Back(13 items). 4. The reinforced opening made a costume more endurable and elastic, decorative and neat.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.9
• /
• pp.1603-1613
• /
• 2001

본 연구는 동작분석장치를 이용하여 하지동작분석을 시도함으로서 실제 동작 시 적응 할 수 있는 의복설계를 위한 기초 자료로서 하지부 실루엣 변화의 특성을 밝히고자 하였다. 대퇴돌기점을 기준으로 본 하지동작의 진행방향 이동과 상향 방향이동을 살펴보았는데 보행유형에 따라 여유량이 특히 요구되는 부위가 각기 다르며, 부위별 필요 여유 량도 각기 다르다는 것을 알 수 있었으며 , 이러한 보행유형 별 스커트 실루엣의 특징은 기능복 설계 시 고려되어야 하겠다. 평지보행 시는 발목부위가 전면방향보다 후면방향으로 이동의 범위가 크므로 트임이나 주름이 뒷면에 있는 것이 적합하고, 계단승강이나 버스승강의 경우 무릎전면에 여유량이 필요하므로 주름이나 트임을 앞쪽에 주는 것이 바람직하며 그 길이는 대퇴돌기점 높이정도에서 시작하여야 하고 무릎아래에 있는 앞트임은 하지동작에 도움이 되지 않음을 알 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.339-343
• /
• 2006

Model SCRamjet Engine intake is designed for Ground test. The designed Intake provides hot and slow flow with the combustor. Flow separation is controlled by the shock wave segregation based on the Korekegi criteria. With Kantrowitz limit analysis, side wall cut out region is also set for the self start.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.595-606
• /
• 2006

Benefits of breast-feeding are so well known that mothers want to breast-feed their children. However there are a few difficulties to breast-feed when they are out for the purpose of work, visit and other social activities. The exposure of the breast is one of them. With the results of 2 surveys, 6 designs were developed. The extinguishing design features were breast openings, which were developed using various fastenings such as elastic tape, buckle, zipper, velcro, snap and button. Three outer wear designs of selected breast openings were developed. These three researched designs were made of proper materials. The purpose of this study is to develop outer wears of functionality and good design for breast-feeding mothers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.2
• /
• pp.141-151
• /
• 2000

Some suitable areas for slits were examined from maternitywear, including maternitybrassiers for breast-feedings. The 4 areas for slit were decided and discussed. Of the 4 slitted areas that the author decided, the responses for preferable slits were collected from both 117 pregnanted and 127 breast-feeding women through interview questions with a questionnaire. From above comprehensive backgrouns, maternitygarments and maternitybrassiers were made and worm individually prior to their evaluations for satisfaction, or dissatisfaction. Some results were obtained from our observations. A slit on center-front areas was shown to be desirable through a questionnaire with convenient feelings when maternitybrassiers were worn. In maternitygarments, a slit under breast from interview questions seemed desirable, and did to have same responses when they were worm because it was proven to be easy for breast-feedings. Our observations indicated that maternitygarments and maternitybrassiers with the similar positioning of slit were preferable and also convenient when they wore.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.673-681
• /
• 2005

Sewing is an important process in clothes-making. It is directly or indirectly connected to a factor of fitness, as is the case of pattern making and design. The purpose of this study is to compare and analyze the sewing methods for tight skirts currently being sold by twelve clothing companies on the market. For the purpose, the skirts, which was released in 2002 Fall season, was physically disassembled and then every sewing detail was closely investigated. The major findings are as follows: All sorts of the skirts show different sewing methods in hemlines, back slits, and zipper. Hemlines and zippers, hand-sewn, are often used by high-price brands. Brands that emphasize trends usually use machine sewing. Specifically, the sewing methods applied in the allowances at the upper part of the back slit show significant differences among brands. One method leaves allowances enough in both sides for the stability of the skirts, another trims both allowances very closely, and the other trims only left-side allowance down to the edge of the back slit. This study findings will be helpful not only in understanding sewing techniques for skirts and improving its quality, but also in offering more comfortable and superior clothes for consumers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.93-104
• /
• 2015

As interest grows in nursing-wear in accordance with dissemination of breast-feeding, a study on opening of nursing-wear is needed to enhance convenience of breast-feeding regardless of location. In this study, the items on nursing-wear were classified and each characteristic was analyzed. The types and characteristics of opening on nursing-wear were identified and the characteristics of nursing brassier closely related to the nursing-wear were also identified. Top 5 companies for the nursing-wear and nursing-brassier were selected by ranking top 5 in NAVER with the search word 'nursing-wear' and 'nursing-brassier'. 732 one-piece and top (t-shirt and blouse) which have the highest portion in the nursing-wear were selected as the subject. Based on the photo, product explanation on the internet and in-depth interview of designer, the types and characteristics of openings for each item were identified. 732 nursing-brassier were selected to study the types and openings in breast-feeding. The result is as follows. Firstly, the item of nursing-wear can be classified into top, one-piece, package of top and the bottom, and sleeveless. Top and one-piece have the highest production rate. Secondly, the types of the openings are either covering or opening types. There are vertical-slit and horizontal-slit in covering type, and vertical-zipper, horizontal-zipper, and button types in opening type, and overlap and pocket type for the rest. Thirdly, the commercially available nursing-brassier according to the opening manner can be classified into upper-opening, middle-opening, and overlap types. Most largely produced product is upper-opening type as it minimizes the exposure of the breast in breast-feeding. When producing the nursing-brassier, the measurement of the lower breast and cup size are considered.