• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.393-398
• /
• 2005

Suspended fine mineral particles are deposited at the areas with low flow velocity and low transportation capacity in rivers, reservoirs and lakes. It can be contaminated by heavy metals. Examples of problem fields art dredging of sediment, water pollutants, and maintenance of navigation channels and construction works. To deal with the settling problems it is necessary to understand tile physico-chemical characteristics of cohesive sediment under varying density of particle and ion addition(NaOH, HCl, NaCl), which is dissolved in river, because fine-grained cohesive sediment can lead to flocculation with the physico-chemical influences and takes different characteristics. Experiments with fresh and saline water are followed with fine-grained sediments(alumina and quartz) in settling columns. Settling velocity of suspended fine particles in still water was measured with a pressure sensor(maximum 10 mbar). Until the initial concentration of 20,000 mg/1 of alumina and quartz the settling velocity was on the increase. Above this initial concentration was it on the decrease. In an acid condition, which causes strong flocculation, average settling velocity of quartz powder was high. In an alkaline water low average settling velocity of it was observed. However, alumina behaved exactly contrarily.

• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.121-131
• /
• 2009

The distribution characteristics of heavy metals for surface sediments in east oceanic dumping area (EDA) and west oceanic dumping area (WDA) are evaluated by grain sizes, minerals, sedimentation rates and compositions of heavy metals. The mean grain sizes in EDA and WDA range from $7.95{\Phi}$ to $8.51{\Phi}$ and $7.42{\Phi}$ to $8.15{\Phi}$, respectively. These are mostly belonging to the M (mud) type. Minerals in the surface sediments consist of illite with chlorite, smectite, and kaolinite. Sedimentation rates estimated by $^{210}Pb$ method in EDA and WDA are 1.11 mm/yr$\sim$1.73 mm/yr and 1.87 mm/yr, respectively. According to the interrelationship, concentrations of Ni, Cu, Cr, and Zn are closely associated with mean grain size, Al, and Fe, whereas concentrations of Cd and Pb are poorly associated with ones. The enrichment factors of these elements are higher than 1.5, suggesting that the concentrations of Cd and Pb in the surface sediments are affected by anthropogenic sources. The $I_{geo}$-class numbers of Cd and Pb in the surface sediments are mostly classified in 2 to 4, showing moderate to strongly polluted. These numbers in EDA are higher than that of WDA, and the highest number is 4, indicative of the strongly polluted class. Our results show that the disposed wastes at EDA include mineralogical wastes, dredged materials from sewage disposals, and sludges from constructions having materials of WDA. The annual amount of oceanic dumping in EDA is double than that in WDA.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.177-177
• /
• 2011

환형수조는 점착성 퇴적물의 침/퇴적실험을 위한 실험장치로서, 수조내부의 수면과 접하여 회전하는 상부링(top ring)의 마찰력에 의해 흐름이 생성되며, 시간의 제약없이 흐름조건을 동일하게 만들 수 있다는 큰 장점을 갖는다. 그러나 환형수조는 원주유속의 속도차이 및 원심력으로 인한 2차 순환류가 형성되어 바닥전단응력이 불균일해지는 단점을 가지고 있으며, 이러한 이유로 인하여 환형수조를 이용한 침/퇴적실험 수행시 수조의 외벽부근에서 더 큰 침식이 발생한다. 따라서, 2차 순환류의 발생을 줄이고 바닥전단응력의 분포를 균등하게 하기 위해 양방향 회전(환형수조의 몸체를 상부링의 회전방향과 반대방향으로 회전)이 가능한 환형수조가 고안되었는데, 이러한 방법으로 2차 순환류의 크기를 저감시키고, 바닥전단응력을 균일하게 만들 수 있다. 한편, 환형수조의 양방향 회전(counter-rotation)은 현장용 환형수조에는 적용될 수 없는 단점을 갖는다. 현장실험에서는 바닥면이 없는 현장용 환형수조를 해저면에 거치시켜 자연상태의 비교란 퇴적물 시료를 저면으로 형성시키는데, 바닥면이 존재하지 않는 환형수조 본체는 회전시킬 수 없으므로 양방향 회전을 통한 2차 순환류의 저감 및 바닥전단응력 균일화의 효과를 기대할 수 없다. 이러한 이유로 환형수조의 양방향 회전은 단지 실내실험용 환형수조에만 적용된다. 이에 본 연구에서는 환형수조 본체를 회전시키지 않고 수조의 측벽과 상부링의 각도 조절을 통해 수조단면의 형상을 변화시켜 2차 순환류를 저감시키고 바닥전단응력을 균등하게 하는 방법에 대한 연구가 수행되었다. 이 방법은 본체의 회전이 필요 없으므로 현장용 환형수조에 적용될 수 있을 뿐만 아니라, 실험장치의 구조가 단순해져 실험장치의 제작비가 절감될 수 있다. 또한 원주속도에 수직한 단면에서 속도구배가 감소되어 2차 순환류가 저감됨과 동시에 바닥전단응력이 균등하게 됨으로서 양방향 회전시와 동일한 효과가 얻어질 수 있을 것으로 예상된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.216-222
• /
• 2015

A previous velocity measurement system for marine sediment had several problems such as the errors occurred when picking first arrival time and the inconvenient measurement procedure. In order to resolve these problems, we developed a new acoustic properties measurement system by using PXI (PCI eXtentions for Instrumentation) module based on LabVIEW. To verify the new system, we measured the velocity and attenuation of sediment using the new system in a parallel with the previous system under the same experimental environment. The result of measurement showed 1~2% margin of error for the velocity as well as similar attenuation values. We concluded that the new system can efficiently measure the acoustic properties of marine sediment. It also has an advantage to construct the database of acoustic data and raw signal.

• Korean Journal of Microbiology
• /
• v.50 no.2
• /
• pp.164-168
• /
• 2014

The ecosystem of the Arctic region has been increasingly affected by global warming. Archaeal ammonia monooxygenase alpha subunit coding gene (amoA) which is a key enzyme for nitrification was used to investigate the effect of runoff water of ice melt on microbial community of nitrogen cycle. The archaeal amoA genes at coastal area of Svalbard, Arctic region were PCR-amplified and sequenced after clone library construction. Analysis of archaeal amoA gene clone libraries suggested that the station 188 which is in the vicinity to the area of runoff water harbor lower ammonia-oxidizing archaeal diversity than the station 176 and 184. The average amino acid sequence identity within all archaeal amoA gene clones was 94% (with 91% nucleotide sequence identity). While all the clones of the station 188 were affiliated with Nitrosoarchaeaum clade containing strains isolated from low-salinity and terrestrial environments, about 45% of total clones of the station 176 and 184 were related to marine Nitosopumilus clade. Interestingly, other typical archaeal amoA gene clones of thaumarchaeal I.1b clade frequently retrieved from terrestrial environments was identified at station 188. Microbial community of nitrogen cycle in marine sediment might be affected by input of sediments caused by runoff glacier melt waters.

• 한국석유지질학회:학술대회논문집
• /
• 2005.09a
• /
• pp.94-100
• /
• 2005

동해 울릉분지 북서부해역에서 채취한 코어퇴적물을 이용하여 울릉분지의 제4기 후기 층서와 퇴적환경을 연구하였다. 이를 위하여 테프라층서, 탄소연대측정, 퇴적상, 퇴적물의 암질, 퇴적물과 공극수의 원소성분 등을 분석하였다. 퇴적상을 기준으로 코어퇴적물은 Unit 1, Unit II 및 Unit III으로 나누어지며, Unit의 경계부근에서는 주로 화산력으로 구성된 2매의 향암질 또는 조면암질 테프라층과 주로 화산재로 구성된 1매의 유문암질 테프라층이 협재되어 나타난다. 이들 테프라층에는 울릉도에서 기원한 울릉-오키층(Unit I/II 경계, 약 8.1 cal. kyr BC)과 울릉-야마토층(약 30.7 cal. kyr BC), 일본에서 기원한 아이라-탄자와층(Unit I/II경계, 약 22.8 cal. kyr BC)이 있다. Unit II의 중간부근에서 발견되는 DLM(Dark Laminated Mud) 층에는 망간보다는 철이 상대적으로 풍부하고, 철은 주로 구상집적체의 황화철로 발견되는데, 이들 광물은 정체환경 동안 물의 순환이 약화된 시기에 무산소환경에서 형성되었다. 퇴적물 내 유기물은 해양성 기원으로, 열적 성숙단계가 대부분 미성숙단계에 놓여 있다. Termination I 전에 급격하게 총유기탄소 (TOC)의 함량이 증가함을 보여주는데, 이는 빙기에서 간빙기로 변하는 시기에 해수면 변동과 관련이 있는 것으로 보인다. 공극수와 공기층 가스의 분석에 의하면, 황산염($SO_4^{2-}$) 농도는 매몰심도와 함께 증가하고, 반대로 공기층 가스의 주성분인 메탄($CH_4$)의 농도는 감소한다. 이는 미생물학적인 활동과 관련된 황산염 환원작용이 코어 상부에서 일어났으며, 점차 메탄생성단계 (methanogenesis)로 전이가 일어났음을 의미한다.측해본 결과 침몰선체의 강도는 초기강도에 비해 약 2/5정도 감소하였음을 알 수 있었다.할 수 있었다. 이 연구 사례를 통하여 3차원 GPR 탐사 또한 국부적인 이상대의 규명뿐만 아니라 광역적인 고고학 조사에도 다른 물리탐사와 마찬가지로 쉽게 활용될 수 있다는 결론을 얻을 수 있었다. 3차원 GPR 탐사가 향후 국내의 문화재 조사에 표준화된 탐사과정 중의 하나로써 적극 활용되길 기대한다.larity가 높은 oil에서는 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$, 여자는 $21.4\%$로 나타났고 이들을 제외한 나머지 사람들은 보통 속도 혹은 충분한 시간을 가지고 식사를 하였다. 평소 식사량은 조금 적게

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.19-30
• /
• 2021

The presence of the hydrate-bearing sediments in Ulleung Basin of South Korea has been confirmed from previous studies. Researches on gas production methods from the hydrate-bearing sediments have been conducted worldwide. As production mechanism is a complex phenomenon in which thermal, hydraulic, and mechanical phenomena occur simultaneously, it is difficult to accurately conduct the productivity and stability analysis of hydrate bearing sediments through lab-scale experiments. Thus, the importance of numerical analysis in evaluating gas productivity and stability of hydrate-bearing sediments has been emphasized. In this study, the numerical parametric analysis was conducted to investigate the effects of the bottom hole pressure and the depressurization rate on the gas productivity and stability of hydrate-bearing sediments during the depressurization method. The numerical analysis results confirmed that as the bottom hole pressure decreases, the productivity increases and the stability of sediments deteriorates. Meanwhile, it was shown that the depressurization rate did not largely affect the productivity and stability of the hydrate-bearing sediments. In addition, sensitivity analysis for gas productivity and stability of the sediments were conducted according to the depressurization rate in order to establish a production strategy that prevents sand production during gas production. As a result of the analysis, it was confirmed that controlling the depressurization rate from a low value to a high value is effective in securing the stability. Moreover, during gas production, the subsidence of sediments occurred near the production well, and ground heave occurred at the bottom of the production well due to the pressure gradient. From these results, it was concluded that both the productivity and stability analyses should be conducted in order to determine the bottom hole pressure when producing gas using the depressurization method. Additionally, the stress analysis of the production well, which is induced by the vertical displacements of sediments, should be evaluated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.1111-1116
• /
• 2002

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.5
• /
• pp.37-42
• /
• 2011

The main objective of this study was to evaluate the current condition of harbor sediments and to estimate biochemical methane potentials from the harbor sediments. Sediment samples were collected from 10 different sampling sites. Ignition loss, elemental analyses, X-ray diffraction(XRD), X-ray fluorescence(XRF) tests were conducted to determine characteristics of the sediment. All sediments had similar elemental compositions and ignition loss were 8~10%. From the conventional BMP tests for 5 samples, cumulative methane production ranged from 11.9~15.5mL methane/(g of volatile solids), which were significantly lower than that for foods and paper. However, methane production rates for sediments were 5 to 20 times faster than those for foods and paper.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.400-404
• /
• 1999

The conventional mercury delay method to measure compressional wave velocity of unconsolidated sediment is inconvenient because the signal must be analyzed on the oscilloscope and the mercury column has to be calibrated between measurements. We developed an automated compressional wave velocity measurement technique by connecting an oscilloscope and a PC with a GPIB (General Purpose Interface Bus) card. The GPIB card buses signals from the oscilloscope to the PC where the signal from a sample is analyzed and compared to the input pulse thereby the compressional wave velocity of the sample is computed and recorded automatically. Differences between the mercury delay method and the automated measurement technique are negligible except the slightly greater velocity in the automated measurement technique. We concluded that the new technique can be used to measure the velocity for unconsolidated marine sediment. It also has an advantage to calculate sediment attenuation through the processing of waveform using the spectral ratio technique.