• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.347-356
• /
• 2018

Genetically modified (GM) crops have been increased continuously over the world and concerns about the potential risks of GM crops have also been increasing. Even though GM crops have not been cultivated commercially in Korea, it should be necessary to develop the safety assesment technology for GM crops. In this study, we investigated the influence of heading date difference on gene flow from GM to non-GM rice. In the experimental plot design, The PAC GM rice was placed in the center as a pollen donor and non-GM rice were placed in eight directions as pollen receivers. Five pollen receiver rice cultivars were Unkawng, Daebo, Saegyejinmi, Nakdong-byeo, and Ilmi which had different flowering times. A total of 266,436, 300,237, 305,223, 273,373, and 290,759 seeds were collected from Unkawng, Daebo, Saegyejinmi, Nakdong, and Ilmi, respectively, which were planted around PAC GM rice. The GM${\times}$non-GM hybrids were detected by repeated spraying of herbicide and PAT immunostrip assay. Finally, the hybrids were confirmed by PCR analysis using PAC gene specific primer. The hybrids were found in Nakdong-byeo which had the same heading date with PAC GM rice. The hybridization rate was 0.0007% at Nakdong-byeo plot. All of GM${\times}$non-GM hybrids were located within 2 m distance from the PAC GM rice zone. The physiological elements including rice heading date were found to be important factors to determine GM?rice out crossing rate with GM rice. Consideration should be taken into for many factors like the physiological elements of field heading date of rice cultivars to set up the safety management guideline for prevention of GM rice gene flow.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.181-216
• /
• 2020

The incarnation of Jesus and Jeungsan's descending to earth as a human being are important theological theories in their respective religions, Christianity and Daesoon Jinrihoe. Both theories are the doctrinal devices necessary for the religious description of each religion. However, this kind of study is likely to result in a theological study that generates religious apologia or explanations. Therefore, it is impossible and meaningless to define the theory of another religion as meta-discourse in terms of one's own religious viewpoint. From a traditional theological point of view, the incarnation is an exceptionalist case wherein God descended as a human being named Jesus to save humanity from original sin. In the case of Jeungsan's descending to earth as a human being, its religious features appear in various forms, so the attempt to unify these two is not an objective method of religious studies. However, this paper aims to find the religious significance of Jesus' incarnation and Jeungsan's descending to earth as a human being by understanding them from a third-person terminology or third-person religious viewpoint rather than from a specific theological position. To this end, this paper will use Kim Jong-seo's position that the concept of Jeungsan's descending to earth as a human being was borrowed from the concept of the incarnation of Jesus as the premise of the research generated in this paper. Therefore, this paper avoids the quest for "Total Christ" or "Total Jeungsan" that integrates and views the divine and human elements of Jesus and Jeungsan. This is because such a research method becomes a theological study. Instead, it excludes transcendental elements or metaphysical aspects that discuss the divine pre-existences of Jesus and Jeungsan and clarifies the significance of the incarnation and Jeungsan's descending to earth as a human being at the physical level in terms which are objective and verifiable. According to this research methodology, this paper develops a discussion after presupposing the hypothetical names of "incarnationist religion" and "divine descent in human avatar religion." However, the two presuppositions mentioned above contain elements of criticism that they are materialistic interpretations that completely eliminate connotations of divinity and religious significance. Nevertheless, it can be said that the two presuppositions have academic significance due to the way in which they avoid the current entanglement of transcendence and instead aim for modernistic relevance.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.2
• /
• pp.34-43
• /
• 2022

This study compared the characteristics of cultural heritage in China and Vietnam, which have developed in the relationship of mutual geopolitical and cultural influence in history, and the following conclusions were made. First, the definition of cultural heritage in China and Vietnam has similar meanings in both countries. In the case of cultural heritage classification, both countries introduced the legal concept of intangible cultural heritage through UNESCO, and have similarities in terms of intangible cultural heritage. Second, while China has separate laws for managing tangible and intangible cultural heritages, Vietnam integrally manages the two types of cultural heritages under a single law. Vietnam has a slower introduction of the concept of cultural heritage than China, but it shows high integration in terms of system. Third, cultural heritages in both China and Vietnam are graded, which is applied differently depending on the type of heritage. The designation method has a similarity in which the two countries have a vertical structure and pass through steps. By restoring the value of heritage and complementing integrity through such a step-by-step review, balanced development across the country is being sought through tourism to enjoy heritage and create economic effects. Fourth, it was confirmed that the cultural heritage management organization has a central government management agency in both countries, but in China, the authority of local governments is higher than that of Vietnam. In addition, unlike Vietnam, where tangible and intangible cultural heritage are managed by an integrated institution, China had a separate institution in charge of intangible cultural heritage. Fifth, China is establishing a conservation management policy focusing on sustainability that harmonizes the protection and utilization of heritage. Vietnam is making efforts to integrate the contents and spirit of the agreement into laws, programs, and projects related to cultural heritage, especially intangible heritage and economic and social as a whole. However, it is still dependent on the influence of international organizations. Sixth, China and Vietnam are now paying attention to intangible heritage recently introduced, breaking away from the cultural heritage protection policy centered on tangible heritage. In addition, they aim to unite the people through cultural heritage and achieve the nation's unified policy goals. The two countries need to use intangible heritage as an efficient means of preserving local communities or regions. A cultural heritage preservation network should be established for each subject that can integrate the components of intangible heritage into one unit to lay the foundation for the enjoyment of the people. This study has limitations as a research stage comparing the cultural heritage system and preservation management status in China and Vietnam, and the characteristic comparison of cultural heritage policies by type remains a future research task.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.37-45
• /
• 2023

The surge in food delivery systems during the coronavirus 2019 pandemic necessitated this study of heavy metal migration from food contact materials (FCMs). A total of 104 samples of FCMs, comprising 51 polypropylene (PP), 21 polyethylene (PE), and 32 polystyrene (PS) samples of six different types of FCMs (containers, covers, table utensils, cups, pouches, and wrappers) used for food delivery distributed in Korea, were collected and investigated for migration of three heavy metals (Pb, Cd, and As) using inductively coupled plasma-mass spectrometry (ICP-MS) to determine whether they complied with Korea's Standards and Specifications for Utensils, Containers, and Packages. Acetic acid (4%, v/v) was used as the food simulant, and tests were performed at 100℃ (in harsh conditions) for 30 min. Linearity of Pb, Cd, and As showed acceptable results with a coefficient of determination (R²) value of 0.9999. Limit of detection (LOD) and limit of quantification (LOQ) of Pb, Cd, and As were 0.001, 0.001, and 0.001 ㎍/L and 0.002, 0.003, and 0.003 ㎍/L, respectively. Accuracy and precision results complied with the criteria presented in the European Commission Joint Research Centre guidelines. The average concentration of Pb, Cd, and As migration detected in a total of 104 samples was 0.009-0.260 ㎍/L, which was very low compared with the migration specification set in the Standards and Specifications for Utensils, Containers, and Packages. The maximum level of Pb corresponded to 0.23% of the migration limit. There were no samples exceeding the limit. Thus, this study confirmed that the heavy metal contents of FCMs used for delivery food distributed in Korea were safely managed. The data from this study represent an invaluable source for science-based safety management of hazardous heavy metals migrating from FCMs used in the food delivery industry.

• The Korean Journal of Mycology
• /
• v.7 no.1
• /
• pp.13-73
• /
• 1979

These studies were conducted to investigate nutrient sources and supplementary materials of synthetic compost media for Agaricus bisporus culture. Investigation were carried out to establish the optimum composition for compost of Agaricus bisporus methods of out-door fermentation and peakheating with rice straw as the main substrate of the media. The incidence and flora of harmful organisms in rice straw compost and their control were also studied. 1. When rice straw was used as the main substrate in synthetic compost as a carbon source. yields were remarkably high. Fermentation was more rapid than that of barley straw or wheat straw, and the total nitrogen content was high in rice straw compost. 2. Since the morphological and physico-chemical nature of Japonica and Indica types of rice straw are greatly dissimilar. there were apparent differences in the process of compost fermentation. Fermentation of Indica type straw proceeded more rapidly with a shortening the compost period, reducing the water supply, and required adding of supplementary materials for producing stable physical conditions. 3. Use of barley straw compost resulted in a smaller crop compared with rice straw. but when a 50%, barley straw and 50% rice straw mixture was used, the yield was almost the same as that using only rice straw. 4. There were extremely high positive correlations between yield of Agaricus bisporus and the total nitrogen, organic nitrogen, amino acids, amides and amino sugar nitrogen content of compost. The mycerial growth and fruit body formation were severely inhibited by ammonium nitrogen. 5. When rice straw was used as the main substrate for compost media, urea was the most suitable source of nitrogen. Poor results were obtained with calcium cyanamide and ammonium sulfate. When urea was applied three separate times, nitrogen loss during composting was decreased and the total nitrogen content of compost was increased. 6. The supplementation of organic nutrient activated compost fermentation and increased yield of Agaricus bisporus. The best sources of organic nutrients were: perilla meal, sesame meal, wheat bran and poultry manure, etc. 7. Soybean meal, tobacco powder and glutamic acid fermentation by-products which were industrial wastes, could be substituted for perilla meal, sesame meal and wheat bran as organic nutrient sources for compost media. B. When gypsum and zeolite were added to rice straw. physical deterioration of compost due to excess moisture and caramelization was observed. The Indica type of straw was more remarkable in increase of yield of Agricus bisporus by addition of supplementing materials than Japonica straw. 9. For preparing rice straw compost, the best mixture was prepared by 10% poultry manure, 5% perilla meal, 1. 2 to 1. 5% urea and 1% gypsum. At spring cropping, it was good to add rice bran to accelerate heat generation of the compost heap. 10. There was significantly high positive correlation (r=0.97) between accumulated temperature and the decomposition degree of compost during outdoor composting. The yield was highest at accumulated temperatures between 900 and $1,000^{\circ}C$. 11. Prolonging the composting period brought about an increase in decomposition degree and total nitrogen content, but a decrease in ammonium nitrogen. In the spring the suitable period of composting was 20 to 25 days. and about 15 days in autumn. For those periods, the degree of decomposition was 19 to 24%. 12. Compactness of wet compost at filling caused an increase in the residual ammonium nitrogen. methane and organic acid during peak heating. There was negative correlation between methane content and yield (r=0.76)and the same was true between volatile organic acid and yield (r=0.73). 13. In compost with a moisture content range between 69 to 80% at filling. the higher the moisture content, the lower the yield (r=0.78). This result was attributed to a reduction in the porosity of compost at filling the beds. The optimum porosity for good fermentation was between 41 and 53%. 14. Peak heating of the compost was essential for the prevention of harmful microorganisms and insect pests. and for the removal of excess ammonia. It was necessary to continue fer mentatiion for four days after peak heating. 15. Ten species of fungi which are harmful or competitive to Agaricus bisporus were identified from the rice compost, including Diehliomyces microsporus, Trichoderma sp. and Stysanus stemoites. The frequency of occurrance was notably high with serious damage to Agaricus bisporus. 16. Diehliomyces microsporus could be controlled by temperature adjustment of the growing room and by fumigating the compost and the house with Basamid and Vapam. Trichoderma was prevented by the use of Bavistin and Benomyl. 17. Four species of nematodes and five species of mites occured in compost during out-door composting. These orgnanisms could be controlled through peakheating compost for 6 hours at $60^{\circ}C$.

• Sijohaknonchong
• /
• v.23
• /
• pp.161-188
• /
• 2005

The purpose of this study was to delve into the morphological types of Sijo in an effort to determine the morphological structure of Sasul-sijo, and it's also attempted to present standard about how to discriminate Pyong-si, Eos-sijo and Sasul-sijo from one another from a morphological standpoint. It's suggested that Si with tee Jangs, six verses and 12 stanzas or more, with three Jangs, seven verses and 14 stanzas or more, and with three Jangs, eight verses and 16 stanzas or more should respectively be called Pyong-sijo, Eos-sijo and Sasul-sijo. After what Sijo was and what's not were discussed, how to distinguish Eos-sijo from Sasul-sijo was described, and finally, the structure of Sasul-sijo was presented. As for Sijo and non-Sijo, the types of works that consisted of tee Jangs, like Sijo, yet didn't suit its framework and Yuljo and were written in Chinese characters were regarded as non-Sijo. Concerning discrimination between Eos-si and Sasul-sijo, the type of Sijo that included one more or higher number of verse(s) and two more or higher number of stanzas in one of three Jangs was defined as Eos-sijo, and the type of Sijo that involved two more or higher number of verses and four more or higher number of stanzas in one of three Jangs was called Sasul-sijo. In other words, Eos-sijo contained one more verse in one of tee Jangs, and Sasul-sijo included one more Jang in one tee Jangs. The sort of Sijo that contained one more Jang in one of three Jangs could be viewed as Sasul-sijo. Regarding the structure of Sasul-si, there should be three Jangs, eight verses and 16 stanzas in one piece of Sasul-sijo. Any type of Sijo that contained two more or higher number of verses and four more or higher number of stanzas could be called Sasul-sijo. Such an addition of verse and stanza could done in various ways. The examples were (1) adding stanzas the first Jang, 2) adding stanzas to the second Jang, (3) adding stanzas to the final Jang, (4) adding stanzas to both the first and Second Jangs, (5) adding stanzas to th the second and final Jangs, and (6) adding stanzas to all the first, second and third Jangs at the same time. Besides, there was an extremely broad gap between the numbers of verse and stanza in Sasul-sijo, which ranged from a low of eight stanzas to a high of 87 ones in one of three Jangs.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.31-66
• /
• 2008

Until Montreal Convention was established in 1999, the Warsaw System is undoubtedly accepted private international air law treaty and has played major role on the carrier's liability in international aviation transport industry. But the whole Warsaw System, though it was revised many times to meet the rapid developments of the aviation transport industry, is so complicated, tangled and outdated. This thesis, therefore, aim to introduce the Montreal Convention by interpreting it as a new legal instrument on the air carrier's liability, specially on the passenger's, and analyzing all the issues relating to it. The Montreal Convention markedly changed the rules governing international carriage by air. The Montreal Convention has modernized and consolidated the old Warsaw System of international instruments of private international air law into one legal instrument. One of the most significant features of the Montreal Convention is that it sifted its priority to the protection of the interest of the consumers from the protection of the carrier which originally the Warsaw Convention intended to protect the fledgling international air transport business. Two major features of the Montreal Convention adopts are the Two-tier Liability System and the Fifth Jurisdiction. In case of death or bodily injury to passengers, the Montreal Convention introduces a two-tier liability system. The first tier includes strict liability up to 100,000SDR, irrespective of carriers' fault. The second tier is based on presumption of fault of carrier and has no limit of liability. Regarding Jurisdiction, the Montreal Convention expands upon the four jurisdiction in which the carrier could be sued by adding a fifth jurisdiction, i.e., a passenger can bring suit in a country in which he or she has their permanent and principal residence and in which the carrier provides a services for the carriage of passengers by either its own aircraft or through a commercial agreement. Other features are introducing the advance payment, electronic ticketing, compulsory insurance and regulation on the contracting and actual carrier etc. As we see some major features of the Montreal Convention, the Convention heralds the single biggest change in the international aviation liability and there can be no doubt it will prevail the international aviation transport world in the future. Our government signed this Convention on 20th Sep. 2007 and it came into effect on 29th Dec. 2007 domestically. Thus, it was recognized that domestic carriers can adequately and independently manage the change of risks of liability. I, therefore, would like to suggest our country's aviation industry including newly-born low cost carrier prepare some countermeasures domestically that are necessary to the enforcement of the Convention.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-84
• /
• 2010

This study was attempted in order to offer basic data for implementing and applying Samjonseokjo(三尊石造), which is one of traditional stone construction method, by confirming how the constructive principle is expressed such as proportional beauty, which is contained in the modeling of Triad of Buddha Carved on Rock that was formed in the period of the Three States, centering on Triad of Buddha Carved on Rock in Susan. The summarized findings are as follows. 1. As a result of analyzing size and proportion of totally 17 of Triad of Buddha Carved on Rock, the average total height in Bonjonbul(本尊佛) was 2.96m. Right Hyeopsi(右挾侍) was 2.19m. Left Hyeopsi(左挾侍) was 2.16m. The height ratio according to this was 100:75:75, thereby having shown the relationship of left-right symmetrical balance. The area ratio in left-right Hyeopsi was 13.4:13.7, thereby the two area having been evenly matched. 2. The Triad of Buddha Carved on Rock in Seosan is carved on Inam(印岩) rock after crossing over Sambulgyo bridge of the Yonghyeon valley. Left direction was measured with $S47^{\circ}E$ in an angle of direction. This is judged to target an image change and an aesthetic sense in a Buddhist statue according to direction of sunlight while blocking worshipers' dazzling. 3. As for iconic characteristics of Buddha Carved on Rock in Seosan, there is even Hyeopsi in Bangasang(半跏像) and Bongjiboju(捧持寶珠) type Bosangipsang. In the face of Samjon composition in left-right asymmetry, the unification is indicated while the same line and shape are repeated. Thus, the stably visual balance is being shown. 4. In case of Triad of Buddha Carved on Rock in Seosan, total height in Bonjonbul, left Hyeopsi, and right Hyeopsi was 2.80m, 1.66m, and 1.70m, respectively. Height ratio in left-right Hyeopsibul was 0.60:0.62, thereby having been almost equal. On the other hand, the area ratio was 28.8:25.2, thereby having shown bigger difference. The area ratio on a plane was grasped to come closer to Samjae aesthetic proportion. 5. The axial angle of centering on Gwangbae was 84:46:50, thereby having been close to right angle. On the other hand, the axial angle ratio of centering on Yeonhwajwa(蓮華坐: lotus position) was measured to be 135:25:20, thereby having shown the form of inequilateral triangle close to obtuse angle. Accordingly, the upper part and the lower part of Triad of Buddha Carved on Rock in Susan are taking the stably proportional sense in the middle of maintaining the corresponding relationship through angular proportion of inequilateral triangle in right angle and obtuse angle. 6. The distance ratio in the upper half was 0.51:0.36:0.38. On the other hand, the distance ratio in the lower half was 0.53 : 0.33 : 0.27. Thus, the up-down and left-right symmetrical balance is being formed while showing the image closer to inequilateral triangle. 7. As a result of examining relationship of Samjae-mi(三才美) targeting Triad of Buddha Carved on Rock in Susan, the angular ratio was shown to be more notable that forms the area ratio or triangular form rather than length ratio. The inequilateral triangle, which is formed centering on Gwangbae(光背) in the upper part and Yeonhwajwa(lotus position) in the lower part, is becoming very importantly internal motive of doubling the constructive beauty among Samjae, no less than the mutually height and area ratio in Samjonbul.

• The Journal of Korean Philosophical History
• /
• no.36
• /
• pp.101-133
• /
• 2013

In this paper, the writer investigated the thoughts on military art and science with a focus on the typical books on military art and science, which was published in the latter period of Joseon, and the discussion of literati in that time. Joseon had been happy to enjoy the piping times of peace for about 200 years ever since the establishment of the dynasty. However, having had to gone through two major wars, the Joseon Dynasty, revolving around scholarly people, had awakened the limits of military art and science of Joseon. It can be said that the countermeasure against Japanese pirates, which were reflected in the "Jingbirok" (懲毖錄 - Records of the 1592 Japanese Invasion) written by Yu Seong-ryong, and the experiences of war had formed the basis of the thoughts on military art and science in the latter period. Regrettably, there were no suggestions or proposals of preparing countermeasure against Japanese raiders in the books of military art and science in the early period of the Joseon Dynasty. Meanwhile, as the argument about the battle formation in the early period of Joseon, the process of establishing the military science had not gone smoothly in the latter period of Joseon. Right after the Japanese invasion of 1592, "Gihyo-Sinseo" (紀效新書 - New Text of Practical Tactics written by Cheok Gye-gwang) was brought into the country by the army of Ming (明) Dynasty. At first, this was used in the form of its original edition, or of abstract version in the military drill. But, later, it was published under the title of "Byeonghak-jinam" (兵學指南 - Military Training Manual about Action Rules by combat situation). This book, same as in Zhejian (浙江) province in China, had achieved a positive effect on counteracting the Japanese raiders in our country. However, these military tactics were conflicted with "Owi Jinbeop" - Rules of Deployment of the Five Military Commands, which had been handed down ever since the early period of the Joseon Dynasty, and, at the same time, it was pointed out that those tactics would not be able to apply to the situation uniformly, since Korea and China were geographically different. Furthermore, having gone through Manchu Invasion of 1636 (丙子胡亂, Byeongja horan) Joseon had used "Yeonbyeongsilgi" (練兵實記 - the Actual Records of Training Army), which was compiled in China on the basis of the experiences of wars against the nomad, including Mongolia and so on. And, this had become a typical training manual together with "Byeonghak-jinam". King Yeong Jo and King Jeong Jo of the Joseon Dynasty had tried to establish uniformity in military training by publishing the books of military science representing the latter period of Joseon such as "Sokbyeongjangdoseol" (續兵將圖說- Revision of the Illustrated Manual of Military Training and Tactics,) "Byeonghaktong" (兵學通 Book on Military Art and Science,) "Byeonghakjinamyeonui" (兵學指南演義 - Commentary on 'Byeonghak-jinam') and "Muyedobotongji"(武藝圖譜通志 - Comprehensive Illustrated Manual of Martial Arts,) and so on. King Jeong Jo had actively participated in the arguments in those days. So then the arguments that had been continued for about 200 years, ever since King Seon Jo, put to an end. To sum up the distinctive features of military art and science in both former and latter period of the Joseon Dynasty, in the former period of Joseon, the reasoning military science was proceeded with the initiative of civic official based on "Mugyeongchilseo"(武經七書- the Seven Military Classics). However, in the latter period of Joseon, "Gihyo-Sinseo"(紀效新書 - New Text of Practical Tactics written by Cheok Gye-gwang) had served as a momentum, and also comparatively a large numbers of military official had participated in arguments, so then such an occasion had made the military science turn into the Practical Theory. Meanwhile, King Sejo and King Jeong Jo had played a leading role in the process of establishing the theory of military science of Joseon, however, there are something in common that their succession to the throne was not smooth. This is the part that reminds us "War is an extension of politics," the thesis of Clausewitz