• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.475-482
• /
• 2021

This study proposed a strategy with literature review on effective monitoring of dispersion of the particulate matters (PM) emitted from domestic open pit lime mines. The mines generally produced a large amount of PM through the mine processes such as crushing and transportation of raw or crushed ores. The PM emission from mine facilities or transportation can be assessed using empirical equations which was prepared through the experimental tests to produce PM from ores. For effective monitoring of mine PM dispersion, this study showed a preliminary application of the monitoring network with multiple low-cost sensors around a main PM emission source for each mine site. Therefore, two domestic limestone mine sites were selected for this study, and install the monitoring network with low-cost PM sensors and LTE (Long-term evolution) data communication. Then, preliminary resultant PM data plotted according to monitoring duration showed typical PM dispersion patterns. The quantification of the PM dispersion patterns should be roughly prepared by a PM size-dependent dispersion modeling.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.185-197
• /
• 2022

Recently, deep learning networks with high performance for object recognition are emerging. In the case of object recognition using deep learning, it is important to build a training data set to improve performance. To build a data set, we need to collect and label the images. This process requires a lot of time and manpower. For this reason, open data sets are used. However, there are objects that do not have large open data sets. One of them is data required for license plate detection and recognition. Therefore, in this paper, we propose an artificial license plate generator system that can create large data sets by minimizing images. In addition, the detection rate according to the artificial license plate arrangement structure was analyzed. As a result of the analysis, the best layout structure was FVC_III and B, and the most suitable network was D2Det. Although the artificial data set performance was 2-3% lower than that of the actual data set, the time to build the artificial data was about 11 times faster than the time to build the actual data set, proving that it is a time-efficient data set building system.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.99-111
• /
• 2021

The connected farm that agricultural land, agricultural machinery and farmer are connected with an IoT gateway is in the commercialization stage. That has increased productivity, efficiency and profitability by intimate information exchange among those. In order to develop the educational program of intelligent agricultural machinery and the agricultural machinery safety education performance indicator, this study analyzed patent trends of agricultural machine with unmanned technology used in agriculture and efficiency technology applied advanced technologies such as ICT, robots and artificial intelligence. We investigated and analyzed patent trends in agricultural machinery of Korea, the USA and Japan as well as the countries in Europe. The United States is an advanced country in the field of unmanned technology and efficiency technology used in agriculture. Agricultural automation technology in Korea is insufficient compared to developed countries, which means rapid technological development is needed. In the sub-fields of field automation technology, path generation and following technology and working machine control technology through environmental awareness have activated.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.125-132
• /
• 2022

This study aimed to examine cucumber (Cucumis sativus) varieties adaptive to the desert climate by comparing and analyzing the growth, yield, and water consumption. Two long-sized cucumber varieties, 'Gulfstream' and 'Imea' and two medium-sized cucumbers, 'Nagene' and 'Sausan' were cultivated in coir substrate hydroponics under hot and humid greenhouse conditions from March 2 to June 20, 2020. On the 113 DAT, 'Nagene' had the longest plant height and the highest internode number. The marketable fruit number per plant was higher in the medium-sized varieties, which had more internode number. The marketable fruit number was 31.3 for 'Gulfstream', 30.7 for 'Imea', 57.8 for 'Nagene', or 56.0 for 'Sausan' with no significant difference in total fruit weights per plant. The water consumption required to produce 200 g of fruit was lower in the 'Nagene' (2.39 L) with the highest water use efficiency (WUE). Therefore, 'Nagene' variety may have higher adaptability to desert high temperature compared to the long-sized varieties, and it is going to be necessary to verify more medium-sized cucumber varieties.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.37-45
• /
• 2022

The development of the electrical, electronic, and telecommunication industries has increased the share of electricity in total energy consumption. With the enforcement of the Act on the Promotion of the Development, Use, and Diffusion of New and Renewable Energy in 2021, the mandatory supply ratio of new and renewable energy is expected to expand, and the amount of waste cables generated in the stage of replacing and discarding cables used in the industry is also expected to increase. The purpose of this study was to quantify the environmental burden of waste cable recycling through the life cycle assessment (LCA) method. The results showed that the higher the amount of glue contained in the waste cable, the greater was the amount of fine dust and greenhouse gases generated. In addition, by assigning weights to 10 environmental burden items, it was confirmed that the marine aquatic eco-toxicity potential (MAETP) and human toxicity potential (HTP) had the greatest environmental burden. The main causes were identified as heptane and ethanol, which were the glue contained in the waste cable and the cleaning solutions used to remove them. Therefore, it is necessary to refrain from using glue in the cable production process and reduce the environmental burden by reducing the use of waste cable cleaning solutions used in the recycling process or using alternative materials.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.133-142
• /
• 2023

The office environment is changing according to work types, Information Technology (IT) advancements, and the Coronavirus disease (COVID)-19 situation. In order for office space users to perform their tasks comfortably and efficiently, it is necessary to secure individual privacy as well as easy communication among members. In Korea, the demand for improving the acoustic performance of office spaces is also increasing, but the related performance criteria and guidelines have not been established. In this study, standardization of office space acoustic performance measurement and evaluation methods and European countries' acoustic performance criteria were compared and reviewed. It is proposed to comprehensively review international standardization trends and acoustic performance standards in each country and to establish and utilize criteria for evaluating the acoustic performance and satisfaction of office spaces in Korea through our survey. Considering the international standardization direction and compatibility with communication and Public Address (PA) systems, it is appropriate to establish criteria using the speech transmission index or Speech Transmission Index (STI) application index. This criterion will be highly utilizable and compatible. In addition, since the office furniture industry is interested in improving the acoustic performance of office space, it is necessary to establish a labelling system for speech level reduction of office furniture.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.141-148
• /
• 2023

Accurate overlay metrology is essential to achieve high yields of semiconductor products. Overlay metrology performance is greatly affected by overlay target design and measurement method. Therefore, in order to improve the performance of the overlay target, measurement methods applicable to various targets are required. In this study, we propose a new algorithm that can measure image-based overlay. The proposed measurement algorithm can estimate the sub-pixel position by using a motion vector. The motion vector may estimate the position of the sub-pixel unit by applying a quadratic equation model through polynomial expansion using pixels in the selected region. The measurement method using the motion vector can calculate the stacking error in all directions at once, unlike the existing correlation coefficient-based measurement method that calculates the stacking error on the X-axis and the Y-axis, respectively. Therefore, more accurate overlay measurement is possible by reflecting the relationship between the X-axis and the Y-axis. However, since the amount of computation is increased compared to the existing correlation coefficient-based algorithm, more computation time may be required. The purpose of this study is not to present an algorithm improved over the existing method, but to suggest a direction for a new measurement method. Through the experimental results, it was confirmed that measurement results similar to those of the existing method could be obtained.

• Journal of Industrial Convergence
• /
• v.21 no.6
• /
• pp.43-51
• /
• 2023

This study analyzed the patent status of the outdoor exercise equipment used primarily by the elderly. The purpose is to utilize the basic data obtained to promote the health of the elderly. The information on the patent was collected from KIPRIS, an information search service provided by the Korean Intellectual Property Office. The search term used was 'outdoor exercise equipment', directly related patents were selected, and a final 157 were analyzed. As a result of the analysis, first, patent registration began in 2007, and 2-3 patents were registered on average every year. Second, patents from the perspective of sports convergence that provide an exercise prescription system using wireless communication, such as the ability to generate electricity by operating a power generation module, providing information on the user's exercise amount, or preventing the loss and theft of weights and safety accidents due to their characteristics, were searched for. Lastly, patents related to exercise equipment that can provide user convenience and increase the frequency of use of exercise equipment were searched. The results of this study confirmed that outdoor exercise equipment is being developed more for the elderly and their convenience, and that companies and public institutions are showing increased interest in outdoor exercise equipment for the elderly. In addition to patent trends analysis, follow-up research in connection with exercise programs using outdoor exercise equipment is needed to develop practical and convenient outdoor exercise equipment in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.329-337
• /
• 2009

In this study we briefly introduce the electronic float system based on the GPS and RF communication technology and present some field application results. The system is capable of operating 15 floats simultaneously for making discharge measurement. Since the electronic floats (EFs) acquire flow paths, they can improve velocity measurement accuracy up to 10%. Additionally, measured velocities by the EFs show good agreement with those by an ADCP. Relative difference in sub-section area calculated by the electronic and conventional float methods is -79~71% and, due to convergent tendency of floats flowing along near banks, it increases much larger. It is possible to improve accuracy up to 5~6% in making discharge measurement by the electronic floats at site with irregular flow paths and section arrangement. The electronic float system is capable of calculating more accurate velocity and section area using position information based on GPS. By real-time measurement of velocity, cross-section area and discharge, the electronic float system is expected to reduce manpower and improve accuracy, rapidity and efficiency of flood discharge measurements.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.10
• /
• pp.309-318
• /
• 2023

Recently, each country has been moving to introduce an LCA (Life Cycle Assessment) to regulate greenhouse gas emissions. The LCA is a mean of measuring and evaluating greenhouse gas emissions generated over the entire life cycle of a vehicle. Reliable data for each electric vehicle component is needed to increase the reliability of the LCA results. To this end, studies on life cycle evaluation models using blockchain technology have been conducted. However, in the existing model, key product information is exposed to other participants. And each time parts data information is updated, it must be recorded in the blockchain ledger in the form of a transaction, which is inefficient. In this paper, we proposed a DID(Decentralized Identity)-based data collection model for LCA to collect vehicle component data and verify its validity effectively. The proposed model increases the reliability of the LCA by ensuring the validity and integrity of the collected data and verifying the source of the data. The proposed model guarantees the validity and integrity of collected data. As only user authentication information is shared on the blockchain ledger, the model prevents indiscriminate exposure of data and efficiently verifies and updates the source of data.