• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.183-183
• /
• 2000

Aigrain에 의해 Helicon이라는 이름이 명명된 이후, helicon은 저온의 금속과 같은 높은 전도도(conductivity)를 갖는 매질이나 강한 자기장이 걸려있는 plasma를 전파해 나가는 저주파 전자기장을 지칭해왔다. 이온화된 개스에서 이러한 전자기장은 전자 공명 주파수(electron cyclotron frequency)와 이온 공명 주파수(ion cyclotron frequency) 사이의 주파수로 전파하며 전리층 (ionosphere)을 통과하며 발생하는 가청 주파수 영역대의 음조가 강하하는 현상에 의해 low-frequency whistler라고도 불린다. Helicon wave plasma는 Boswell에 의해 처음 발생된 후, 높은 이온화율(~100%)로 인해 많은 연구가 이루어져 왔다. 1985년에 Chen은 helicon plasma의 높은 이온화율을 설명하기 위해 Landaudamping을 제시하였다. 이러한 설명은 1997년에 Shamrai에 의해 TG mode가 도입되기 전까지 직접적인 실험결과 없이 helicon plasma 발생의 mechanism으로 받아들여졌다. shamrai의 이론에 의하면 정전기파(electrostatic wave)는 plasma의 표면(surface)에서 강하게 감쇄되어 energy를 전달하게 된다. Cho는 radial density 분포가 외각보다 중심이 높을 경우 TG wave의 power 전달이 중심에서 일어날 수 있음을 계산하였다. Helicon plasma의 특성은 높은 이온화율에 의한 높은 밀도($\geq$1012cm3), 1-2 kW의 rf power에서 상대적으로 낮은 전자 온도( 4eV), $\omega$ci $\omega$LH<$\omega$ $\omega$ce $\omega$pe 영역대의 주파수, 자기장 50-1200 Gauss, 압력 1-10 mTorr로 특정지을 수 있다. 이러한 외부분수들의 조건에 k라 helicon plasma는 여러 종류의 mode로 존재한다. Degeling은 이러한 mode의 변화를 capacitive mode, inductive mode, 그리고 helicon mode(wave mode)의 세가지 부분으로 구분하였다. Helicon plasma가 갖는 높은 이온화율은 여러 가지 응용으로의 가능성을 가지고 있다. 그 예로 plasma processing, plasma wave에 의한 입자 가속, 그리고 가스 레이저 활성 매질 발생 등이 있다. 특히 plasma processing의 경우 helicon plasma는 높은 밀도, 비교적 낮은 자기장, remote operation 등이 가능하다는 점에서 현재 연구가 활발히 진행되고 있다. 상업용으로도 PMT와 Lucas Signatone Corp.에 서 helicon source가 제작되었다. 또한 높은 해리율을 이용하여 저유전 물질인 SiOF의 증착에서 적용되고 있다. 이 외에도 다수의 연구결과들이 발표되었다.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.1
• /
• pp.69-75
• /
• 1994

Through the histological and anatomical investigation of silkworm gonad, N. bombycis infection was found to begin from the peripheral region of ovarial sheath or testicular sheath, then, the pathogens spread to the inner portion. Peroral inoculation with purified spores of N. bombycis to 2nd instar larvae at dosages around 106-8/㎤ of artificial diet resulted in the extremely extended larval survival as long as 15 to 22 days of 4th instar. The growth of ovarioles was confirmed in the 10 to 14 day old larvae, oogonia developed into oocytes and nurse cell against heavy infection of the ovary. Gonads rarely obstructed oogenesis and spermatogenesis in the pupae failed in adult eclosion. Light infection of female hosts effected insignificantly on the ovarial development, however, recorded 100% transmission of the pathogens to the progeny populations. Conclusively, ovarial inflection of silkworm induce transovarial transmission begins around 2~3 day old pupae when ovarioles extruded out to hemocoel, and the infection period thought to be continued until the stage of eggs complete shell formation in the ovariole.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.527-531
• /
• 2007

하천내에서 작은 물고기의 국지적인 회유 또는 이동 습성은 먹이를 구하고, 산란 및 성장과 집단에서 분산하고, 위험으로부터 도피하는 것에 밀접한 연관이 있다. 하천의 합류부와 연결부에 제방(levee), 도로(road) 등이 설치되는 경우 일반적으로 암거형태의 인공수로로 상 하류를 연결되는데, 암거내 수리특성상 평수시 저유량, 고유속, 저수심의 수리특성을 보인다. 이러한 수리특성은 물고기가 이동하는데 장애(barrier)가 되어 생태적으로 하천내 종다양성 감소와 일부 어종의 멸종을 초래한다. 어도 설치시 설계기준에서 가장 주목할 부분은 어도를 이용할 대상어종의 범위와 유영능력이다. 하천설계기준(2005, 한국수자원학회)에서 제시된 물고기의 유영능력은 대부분 국외 어종을 대상으로 외국에서 실험한 결과를 이용하고 있다. 그러므로 이러한 기준이 국내 어종에 대해 적합한지에 대한 검토가 필요하다. 본 실험의 목적은 국지회유성인 피라미와 각시붕어가 인공수로를 통과할 때의 유영행동 중 소상성공율과 유영속력을 평가하고자 함이다. 유영행동의 실험방법은 Brett(1967)에 의해 제안된 2가지 방법인 증진유속방법과 고정유속 방법중에서 물고기의 이동경로와 소상능력을 확인하기에 용이한 고정유속방법을 사용하였다. 또한, 효과적인 실험을 위해 실험어종(피라미 100마리, 각시붕어 100마리)이 실험 중에 최적의 건강상태를 유지할 수 있도록 물고기의 적응 기간(24시간)과 실험 중 휴식기간을 두었다. 실험결과 체형이 방추형(fujiform)인 피라미의 경우 평균유속 $0.7{\sim}0.8m/s$구간에서 소상성공율이 61%에서 26%로 급격하게 하락하는 현상이 나타났다. 그리고 측편형(compressiform)의 체형을 가진 각시붕어의 경우 평균유속 0.4m/s에서 소상성공율이 25%로 나타났으며 그 이상의 유속에서는 10%이하로 나타났다. 실험어종의 이동경로를 분석한 결과 대부분 수로바닥에 밀착하여 최저유속구간을 이용하여 이동하는 것으로 나타났으며, 이동경로의 지점유속은 평균 유속의 70%정도로 나타났다. 실제 하천에 설치된 인공수로가 생태통로의 기능을 유지하기 위해서는 평상시 수리특성이 대상어종의 유영능력을 초과하지 않도록 설계되어야 한다. 특히, 하천에 설치된 인공수로의 길이가 $5{\sim}10m$정도일 경우라면 피라미의 소상 가능성을 50% 이상 확보하기 위해서는 평수시 설계유속이 0.7m/s를 초과하지 않아야 할 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1235-1239
• /
• 2012

Primary water stress corrosion cracking (PWSCC) has been observed around the weld region of control rod drive mechanism (CRDM) nozzles in nuclear power plants overseas. The weld has a J-shaped groove and it connects the CRDM nozzle with the reactor vessel upper head (RVUH). It is a dissimilar metal weld (DMW), because the CRDM is made of alloy 600 and the RVUH is made of carbon steel. In this study, finite element analysis (FEA) was performed to estimate the stress condition around the weld region. Generally, it is known that a high tensile region is more susceptible to PWSCC. FEA was performed as for the condition of welding, hydrostatic test and normal operation successively to observe how the residual stress changes due to plant condition. The FEA results show that a high tensile stress region is formed around the weld starting point on the inner surface and around the weld stop point on the outer surface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.684-691
• /
• 2015

A sudden increase in combustion pressure is observed in the ducted rocket combustion test equipped with pipe shaped and converging nozzle exhaust tubes. This study aims to understand the physical mechanism of abrupt change in combustion pressure using thermal choking in the exhaust tube. Results confirmed that the thermal choking of the flow inside the exhaust tube was responsible for the sudden increase in combustion pressure. Also, high pressure exponent of solid propellants is critical sensitive to the occurrence of thermal choking exhaust pipe. Additionally, numerical simulation showed that the sudden increase in combustion pressure was less possible in diverging pipe because thermal choking is more reluctant to occur.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.351-370
• /
• 2004

At present, environmental monitoring of linear infrastructure is based mainly on field sampling. The 'integrated mapping' approach has received only limited attention from field scientists. The increased environmental regulation of corridor targets has required remote sensing research to develop a sensor or technique for targets ranging from 15 m to 100 m in swath width. In an attempt to identify the optimal remote sensing system for linear targets, an overview is provided of the application requirements and the technology currently available. The relative limitation of traditional remote sensing systems in such a linear application is briefly discussed. It is noted that airborne video could provide, in a cost-effective manner, information required for a very narrow and long strip target utilising the narrow view angle and dynamic stereo coverage. The value of this paper is warranted in proposing a new concept of video infrastructure monitoring as a future research direction in the recognition of sensor characteristics and limitations.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.53-63
• /
• 2016

This study aims to discuss what is needed for meaningful development of social service, focusing on Community Service Investment Project(CSIP). The contents of CSIP were analyzed on applying the Analytic Framework by N. Gilbert and H. Specht and the values that were the basis of social choice. Based on the analysis of output and policy value of this Project, this study draws three social service policy issues. First, 'localization' is needed to be emphasized more in CSIP because there are few programs that take into account the regional peculiarities. Second, as the social services focused on the individuality of the citizen is more important, it is necessary to examine 'sustainability' of CSIP. Third, in relation to the community building, it is necessary to discuss the modification of the CSIP's goals. As process for improving community, it is needed to review for local residents not participating in decision-making process, income-based user selection and appropriateness of the term 'investment' in the project name.

• Food Industry
• /
• s.169
• /
• pp.104-115
• /
• 2002

Physiological effect of Korean black soybean pigment were investigated. Major anthocyanin pigments of Korean black soybean were extracted with $1\%$ HCI for 24hours at $4^{\circ}C$. Inhibitory effects of angiotensin converting enzyme

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.155-168
• /
• 1999

The paleoseismological importance of the Yangsan fault zone was examined by historical earthquake data, aerial photograph, and trench survey of the area. Occurrences of great earthquakes during the historical time indicate that the Yangsan and/or Ulsan fault have been active during the late Quaternary and generated historical events. Geomorphological evidences of the recent fault activity are clearly shown both in the northern segment (Yugye-ri, Tosung-ri and Naengsu-ri areas) and in the southern segment (Eonyang to Tongdosa areas) of the Yangsan fault. The main Yangsan fault is characterized by fault gouges and NNE-SSW lineaments. The reverse faulting in the Yugye-ri area generated about three-mater displacement of the lower terrace deposits. On the other hand, a major strike-slip movement with a minor component of 5-12 m vertical displacement was identified by the offset of the higher terrace surface in the Eonyang area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.1-15
• /
• 2017

Recently terrorism targets unspecified masses and causes massive destruction, which is so-called Super Terrorism. Many countries have tried hard to protect their citizens with various preparation and safety net. With inexpensive and advanced technologies of sensors, the surveillance systems have been paid attention, but few studies associated with the classification of the pedestrians' trajectories and the difference among themselves have attempted. Therefore, we collected individual trajectories at Samseoung Station using an analytical solution (system) of pedestrian trajectory by LiDAR sensor. Based on the collected trajectory data, a comprehensive framework of classifying the types of pedestrians' trajectories has been developed with data normalization and "trajectory association rule-based algorithm." As a result, trajectories with low similarity within the very same cluster is possibly detected.