• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.114-120
• /
• 2008

This paper proposed the band pass filter(BPF) with feeding structure using $\pi$-type transmission line by means of transforming the input/output coupled-lines of the half wavelength parallel coupled-line BPF into K-inverter, then substituting $\pi$-type transmission line equivalence for K-inverter. The proposed method supplies solution with what the half wavelength parallel coupled-line BPF's input/output coupled-lines are realized. Also it can quite reduce efforts and time needed to optimize filter performance when is compared to reported method using tapped line structure because formulas is very simple and accurate. On the basic of the proposed method, the BPF with feeding structure using $\pi$-type transmission line has been designed and fabricated. The validity of proposed method was proven by the measured result.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.884-890
• /
• 2008

In this paper, Characteristics responded to frequency of a band-pass filter with admittance inverters(J-inverters) is considered. As a result, it is confirmed that attenuation characteristics of upper and lower frequency is asymmetric. And a modified circuit and design formulas are proposed to improve the asymmetric attenuation characteristics. By confirming the simulated and measured results that are got from designed and made a experiment on the band-pass filter with the proposed circuit and formulas for design, we confirm that the asymmetric attenuation characteristics of the band-pass filter are improved without any optimization or iterative design procedures and additional calculation efforts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1447-1453
• /
• 2010

In this paper, the design and the fabrication of dual-band bandpass filter using two dual-mode resonators is presented. Dual-mode resonator using a short stub is miniaturized by inter-digital capacitor and stepped impedance. Two dual mode resonators are designed to have different resonant frequencies, one for the lower passband and the other for the upper passband. Transmission zero is positioned at low or high rejection bands with a sharp skirt characteristic. Dual-band operation can be achieved using dual feeding structure. For WLAN, the proposed filter at 2.45/5.25 GHz is designed and fabricated. The size of the filter is as compact as 1$10.83\;mm{\times}5.3\;mm$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.169-174
• /
• 2018

In this paper, a design method for a wideband LPF for harmonic suppression applications is investigated. The proposed wideband LPF is comprised of four circular slot pairs with different diameters, which are added symmetrically in the ground plane of a CPW transmission line. Four circular slot pairs act as a defected ground structure and provide a wideband low pass characteristic. The circular slot with the smallest diameter is located at the side of port 1, and the diameter of the circular slot is increased as it goes toward port 2. The low pass characteristics of each circular slot are compared with the proposed wideband LPF. The final designed LPF was fabricated on FR4 substrate, and its characteristics were tested. The measured S11 characteristic was maintained at over -3.3 dB in the frequency range of 1.89-20.00 GHz band, whereas the S21 characteristic was less than -21.4 dB in the frequency range of 2.66-20.00 GHz.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.113-124
• /
• 2010

This study is evaluating that new hi-tech transit systems each type of function and introduce applicable guideline decreases land sale price in New town and Large scale land development projects. For this, use the look-up table through the composite category of each type of system at the functional types, local characteristics. It also, As introduce the new systems calculate the Social benefits such as altered public traffic transfer system, reduced transit time and reduced carbon emission considering the three-dimensional arterial roads. As a result, New transportation systems contribute that the more reducing traffic congestion and air pollution and municipalities seeks for environment-friendly policy. However, this paper emphasize that the new transportation system has been introduce without considering the characteristics of locality and the efficient arrangement of them, it cannot be transferred the to the existing public traffic efficiently, futhermore causes the sale price in new large scale land development projects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.620-625
• /
• 2003

The coplanar waveguide bandpass filter using folded-line stepped-impedance resonators(SIRs) is proposed. The folded-line SIR has about λ/8 length using the short-circuited end on coplanar waveguide. It make that the bandpass filter has the half size in comparison with general λ/4 SIR filter. In this paper, we derive the equivalent circuit and design the bandpass filter by using that. We design and fabricate the bandpass filter which has 5 GHz center frequency and 3 % fractional bandwidth. The measurement results fur 4-pole folded SIR bandpass filter agreed well with full-wave simulation and equivalent circuit results. The fabricated bandpass filter has a good spurious characteristic, which the harmonic frequency appeared at 2.5f$\_$0/). The proposed folded-line SIR bandpass filter are applicable for MMIC and High-Tc superconducting filters. bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1089-1095
• /
• 2006

In this paper, the circuit analysis of three-dimensional bandpass filter with transmission zero in multi-layer printed circuit board is presented. The equivalent circuit of bandpass filter is evaluated by microwave network analysis. Compare to the established paper that have configured the circuit model of filter except the effect of distribute element, the proposed model can include the effect. As a result, the multi-layer PCB bandpass filter with transmission zero has designed by extracting mutual capacitance from electrical component inside inductor. The structure size is only $10mm{\times}20mm{\times}1.251mm$. Measured data of the bandpass filter indicate 1.9 dB of insertion loss and 28 dB of return loss at the center frequency of 1.84 GHz, as well as 43 dB attenuation at the refraction frequency of 2.78 GHz.

• The Journal of Korean Medicine
• /
• v.16 no.2 s.30
• /
• pp.134-148
• /
• 1995

Dysmenorrhea is probably the most common of all Gynecologic disorders. In the oriental medicine the etiology of Dysmenorrhea is very various, but its mechanism is just that the block of the flow makes the pain. So its treatment is removing the pain by promoting menstrual flow, promoting the flow of qi and by warming channel and activating blood flow. In the various treatments of dysmenorrhea, the method of applying drug at the acupoints which could be combined with feeding herb-medicine by oral was studied. The results obtained here were as follows; 1. In the treatments of dysmenorrhea, the method of applying drug at the acupoints was mainly applied to the type dued to stagnancy of qi and blood stasis, menorrhalgia dued to to cold and dampness, and primary dysmenorrhea. 2. The acupoint used in this treatment was Shin-gwol$(CV_8)$, the umbilicus. 3. The drugs used in this treatment were almost same as oral herb-medicine mainly to activate the blood flow and remove the blood stasis and to promote the flow of qi by warming the channel and remove the pain. 4. The duration of the treatment is, from 3 days before menstration till its period or a few days after it., usually concentrated on fore-postmenstration. 5. The effect of this treatment was reported as excellent. It is more effective to the type of stagnancy of qi and blood stasis, cold and dampness than dued to deficiency of both qi and blood, and dued to the impaired liver-kidney essence. 6. The method of applying drug at the acupoint was as an external treatment, easy, economical, and had no pain and side effect. 7. In the treatments of dysmenorrhea, the method of applying drug at the acupoint could be used as emergency treatment and symptomatic treatment in fore-postmenstration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.30-44
• /
• 2020

The application of PPLT is difficult to analyze and judge only from the effects of the delay time. In this study, the application of PPLT was proposed using not only the delay time of PLT and PPLT due to the change in traffic volume and the number of opposite straight lanes but also the traffic volume of passing a left turn and the number of conflict risks as indicators. According to the analysis, the more left-turn traffic than capacity and the less opposite-straight volume, the greater the PPLT effect. On the other hand, if the left-turn traffic is below capacity, the delay time will be reduced partially, but the overall passing left turn volume will not increase, and the conflict risk will increase. In addition, the conflict risk increases in the third lane or higher. Moreover, the difference of passing left-turn volume between PLT and PPLT showed a pattern similar to the delay time difference, and the PPLT coverage was wider than the difference in delay time and was associated more with the conflict risk numbers. Therefore, it would be reasonable to use passing left-turn traffic primarily, consider the delay time below the left-turn capacity, and consider the conflicting risk numbers simultaneously at or above the opposite straight three lanes.

• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.102-106
• /
• 1991

최근의 사회적 경제적인 급속한 발전에 따라 환경 소음에 대한 사람들의 관심도가 점차 증가되고 있다. 이로 인하여 사람들이 항상 접촉하게 되는 가전 제품 에 대한 소비자의 욕수도 제품의 성능적인면도 물론이지만 소음진동 및 디자인에 대하여도 지대한 관심이 모아지고 있다. 가전 제품에 있어서 주된 소음원은 홴 및 압축기 덮개의 진동등으로 파악할 수 있다. 특히, 홴은 냉각용, 송풍용으로서 거의 모든 가전제품에 쓰여지고 있다. 냉각용으로 사용되는 형식은 주로 축류 홴이다. 축류 홴은 다른 종류보다 소음이 크기 때문에, 저소음 축류 홴의 BPF(Blade Passing Frequency; 날개 통과 주파수)가 갖는 소음 특성을 연구하여야 한다. 이를 위해 축류 홴의 날개 갯수를 조절하면 설치된 통내에서의 BPF가 어떠한 형태로 변화하는가를 알아보고, 이에 따른 저소음화 대책을 검토하고자 한다. 홴은 그 덮개에 대하여 유량 및 소음에 관한 최적의 위치가 존재하는데, 문이 잠겨 있을 때에는 그 소음 레벨의 편차가 몹시 크게 된다. 한편 날개 갯수, 모터의 회전속도 및 통의 전달 함수 등을 감안하여 날개 통과 주파수(BPF)를 조정하면, 각종 가전 제품의 홴에 의한 방사를 저감시킬수 있다.