• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.73-78
• /
• 2005

In this paper, a bandpass filter with excellent cut off characteristic due to transmission zero using bypass coupling capacitor and with superior harmonic characteristic by interdigital capacitor is suggested. The measurement results for SIR bandpass filter with bypass coupling capacitor and interdigital capacitor show that the insertion loss is less than 1.9 dB and the return loss is better than 15.4 dB with 4.2 % bandwidth at the center frequency of 5.78 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.893-899
• /
• 2010

In this paper, the design of a new bandpass filter based on the modified circular mushroom metamaterial structure is proposed. In detail, half circular mushroom cells are used as the zeroth order resonators(ZOR), and an intermediate gap is adopted to introduce the coupling between neighboring ZOR resonators. The proposed bandpass filter design is validated by the circuit and 3D EM simulations and measurements compared to the target specifications, and the metamaterial properties are proved by the ZOR field distributions and dispersion diagram. Also, the effect of size reduction is addressed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.162-167
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass filter using a high-pass filter and low-pass filter. The structure of our proposed band-pass filter is very simple and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement the insertion loss is less than 0.5dB throughout the pass-band of $2.1GHz{\sim}10.56GHz$, the return loss is more than 20dB and the group delay maximum variation is 0.23ns from 0.12ns to 0.35ns.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.687-687
• /
• 2004

예술의 전당 하부를 통과하는 우면산터널은 예술의 전당 자료관, 오페라하우스, 음악당, 서예관, 미술관 등의 건물과 인접하여 설계되었다. 이들 건물은 진동의 전달경로에 따라 구조-구조의 전달경로인 자료관과 구조-지반-구조의 전달경로인 오페라하우스, 음악당, 서예관으로 분류할 수 있다. 자료관은 하부의 기조 중 일부가 우면산 터널의 통과를 위해 설치한 박스(box) 터널 상부와 구조계를 형성하고 있고, 오페라하우스와 음악당 및 서예관 주변으로는 우면산 터널의 상행선과 하행선이 각각 인접하여 통과하는 구조계를 형성하고 있다. 본 연구는 서울시 서초구 서초동～우면동에 이르는 우면산 터널에 실험 차량이 통과할 때 차량 통행으로 인해 발생하는 진동이 예술의전당 자료관, 오페라하우스, 음악당, 서예관 등의 건축구조물에 전달되는 고체전파음의 발생특성 파악하고, 예술의전당 통과구간에 방진패드에 의한 도로포장 공사 후 그에 대한 효과를 비교하였다. 또한, 우면산 터널 예술의 전당 통과구간에 대하여 다공성 아스팔트로 도로포장한 후 그에 대한 효과도 파악하였다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.227-233
• /
• 2012

This paper presents a bandpass fitler of GPS and WLAN band based on LTCC. The structure of bandpass fitler consists of a Butterworth lowpass fitler and highpass filter using CRLH (Composite Right/Left-Handed) transmission line. Using green sheet with dielectric constant 7.2, we fabricated the bandpass filter that satisfied GPS and WLAN band characteristics. We are implemented the bandpass filter at center frequency 1.5 GHz (GPS) and 2.4 GHz (WLAN). Its insertion loss are 1.66 dB at GPS and 3.20 dB at WLAN respectively.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.56-59
• /
• 2005

Trans-posterior septal posterior arthroscopic portals are useful in performing arthroscopic diagnosis and treatment of the lesions located in posterior aspect of knee joints. Except inferior surface of posterior horn of lateral meniscus, we easily observed entire lateral compartment, especially inferior surface of anterior horn and lateral tibial condyle by figure of 4 position through posteromedial trans-posterior septal arthroscopic portal. And it was possible to obtain visual field from posterior aspect and we could use anteromedial and anterolateral portals for instrumentation without clouding. So, this procedure may be useful in performing surgery of lateral compartment especially, anterior aspect in the knee joints.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1214-1218
• /
• 2010

A new compact UWB bandpass filter with sharp-rejection and low insertion-loss is designed in this paper, using the parallel transmission line with SIR structure. An Example filter is firstly theoretically designed by the proposed synthesis procedure, the optimized by EM simulator, fabricated in microstrip line and finally characterized by a network analyzer. A good agreement between the simulation results and prototype validates the proposed UWB bandpass filter. The designed filter also realized a sharp rejection of higher order with a relatively small size which is proper for the UWB communication system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1065-1072
• /
• 2012

In this paper, the method of design of the waveguide band-pass filter and limiter in radar system is proposed. First, we design a self-resonant iris, which can behave as a band-pass filter by mounting the PIN diode on the iris. When low power microwave is incident on the proposed element, the element behaves as a band-pass filter. Under a high power microwave condition, however, the element behaves as a limiter having wide band stop characteristics. The fabricated element has a pass band with -0.7 dB insertion loss at 10 GHz under the low power condition and isolation about 25 dB under the high power condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.639-647
• /
• 2007

This paper proposed the novel method that can realize the parallel coupled line(PCL) band-pass filter with directly coupled feeding structure by means of transforming the first and last PCL sections of the conventional PCL band-pass filter into K-inverters, then substituting T-type equivalence for K-inverter. The proposed method supplies simple design formulae and can considerably reduce time and efforts needed to optimize filter performance when compared to reported methods using external Q or equivalent parameters. On the basis of the proposed method, the band-pass filter using directly coupled feeding structure and having 18% fractional bandwidth was designed and fabricated. The validity of proposed method was proven by the measured result.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.674-679
• /
• 2007

In this paper, the size of the dual-mode microstrip ring resonator is reduced by adding four open stubs, and bandpass filters having 100 MHz bandwidth are designed at the center frequency of 2 GHz. The size of the ring resonator can be controlled by varying the capacitance of the stubs, and the bandpass filter can be designed in two cases, which are two combinations of the stubs. Two bandpass filters are designed and fabricated by using the two-stage bandpass filter circuit model of the proposed structure, and the measured results show good agreement with the simulated results.