• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1062-1063
• /
• 2015

오프 그리드 형태의 소형풍력발전기는 도심지 또는 사람이 거주하는 지역에 설치되므로 소음, 진동, 안전성 등에 많은 문제가 야기되고 있다. 풍력발전기 내부적으로 소음 및 진동에 가장 큰 영향을 미치는 요소는 코깅토크로 발전기 회전자가 회전할 때 고정자 슬롯과 회전자 영구자석 사이 공극 릴럭턴스 변화에 의해 발생한다. 또한, 코깅토크는 풍력발전기의 초기 기동 풍속에 영향을 미치며, 토크리플 증가의 원인이 되어 코깅토크 저감 설계는 소형풍력발전기 설계에서 필수적으로 이루어져야 한다. 본 논문에서는 실험계획법을 진행하여 이중고정자 발전기의 영구자석 형상 최적화 설계를 통해 코깅토크를 저감 설계를 실시하였으며, 추가적으로 발전기 출력 전압 고조파 발생을 저감시켰다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.27-31
• /
• 2010

Torque ripple of the motor used in EPS raises vibration problem on steering system. To solve this problem, this paper proposes a optimum design for torque ripple reduction of Surface-mounted Permanent Magnet Synchronous Motor(SPMSM) in EPS. Through analyis back-EMF using Finite element method as changing the shape of permanent magnet and stator shoe, we presented the method of torque ripple redution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5128-5134
• /
• 2011

This paper investigates the dq current trajectory for maximum torque per ampere(MTPA) operation of an interior PM synchronous motor for HEV(Hybrid Electric Vehicle). Based on the dq current trajectory for the MTPA operation derived from the motor parameters, the change of the MTPA operating point for the variation of the motor parameters including the magnet flux and the dq inductances is considered. The dq current trajectory for MTPA operation is verified through the experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.2
• /
• pp.241-247
• /
• 1998

The hydraulic coupling is a kind of power transmission device combined with pump turbine and casing as its main parts. The purpose of this research is to construct an experimental test set-up and to establish an available soft ware for th characteristics of two domestically developed hydraulic couplings. The test item is torgue rpm. and slip and or efficiency characteristic in accordance with variation of oil quantity. in this case the oil quantity was varied 55%, 67% and 77% of the inside capacity of hydraulic copuling.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.76-78
• /
• 2009

Spoke type 영구자석 전동기는 자속이 집중되어 높은 공극자속밀도를 가지는 이점이 있으나 코깅토크가 비교적 크다는 단점이 있다. 소음 진동의 원인이 되는 코깅 토크를 저감하기 위해 모델1, 모델 2를 통해 회전자의 형상을 변화시키는 일반화 계수를 찾고 이를 모델3에 적용시켜 확인하고자 한다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.91-99
• /
• 2013

The purpose of this study was to investigate the muscular activity and muscle strength for swing track of upper limbs during rowing exercise. Subject was all twenty healthy adults and they were divided into linear exercise group and elliptical exercise group in random. Subjects performed rowing exercise 3-times for a week and performed all 8-weeks. We measured realtime-surface EMG. Also we measured joint torque of elbow, ankle and lumbar in subjects using BIODEX. The result showed that when rowing exercise, elliptical track exercise had higher muscular activity in trapezius, deltoid, erector spinae, rectus femoris, biceps femoris, gastronemius than linear track exercise on more many muscle of upper and lower limbs. Also elbow joint torque and lumbar joint torque was more higher too. but linear exercise also had higher muscular activity in multifidus, tibilalis anterior than elliptical track exercise. According to this experiment, we found out that elliptical track was more efficient than linear track.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.231-237
• /
• 2007

The torque ripple of the hydraulic pumps for the Electro-hydrostatic Actuators can disturb the cylinder position control under slewing speed operation condition. In principle, the periodic change of the reaction torque generated by a piston type pump is highly dependent on the waveform of its cylinder chamber pressure. In case of uni-directional pumps operating at constant speed, the transient overshoot and rising slope of the cylinder pressure can be adjusted by the precompression angle and notch shape of their valve plates. Therefore, the influence of the valve plate geometry on the torque ripple magnitude of a bent-axis type piston pump for EHA application was investigated in this study. The results showed that any improvement of the torque ripple of such a bi-directional pump can not be achieved by modifying the valve plate geometry, regardless of its operation speed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.579-585
• /
• 2014

10kW wind turbine is widely studied in the field of renewable energy for the merits of easy installation to the confined area such as hill, park and urban areas. The performance of various electrical devices such as converter and inverter in the wind turbine system should be systematically analyzed for various wind speeds. However, it is impossible to apply these devices directly to practical wind turbine system for the safety of wind turbine system. Therefore, it is required to develop torque simulator which can generate corresponding torque according to its wind speed. In this work, 10kW torque simulator which consists of three phase torque control inverter, 3 phase induction motor and PMSG(Permanent Magnet Synchronous Generator) is developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.277-283
• /
• 2020

In a concentric magnetic gear, which replaces the teeth of a mechanical gear with a permanent magnet, the polar ratio of the magnet that determines the reduction ratio affects the behavior of the magnetic gear dramatically. This study analyzed the density of transmission torque, the efficiency of torque considering the solid loss, and the torque quality, including the cogging characteristics using finite element analysis. When the pole number on the driving side was changed from two to five, it was confirmed that there was an optimal pole ratio, in which the transmission torque was maximized. Because eddy current generation density is proportional to the magnetic field, the transmission efficiency also shows a similar tendency to the transmission torque density, and the efficiency is more than 95% at a low gear ratio. The cogging characteristics due to the interaction of the permanent magnets with the limited number of poles are inversely proportional to the least common multiple between the number of magnets on the drive side and the number of modulator teeth. A test model was built for the transmission torque evaluation.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.527-528
• /
• 2016

현재 전기자동차용으로 높은 출력 밀도와 넓은 속도 영역을 가지는 매입형 영구자석 전동기 (IPMSM)가 널리 사용되고 있다. 매입형 영구자석 전동기의 높은 돌극비는 큰 릴럭턴스 토크를 만들 수 있어 기저 속도 이하에서는 높은 토크를 보장한다. 하지만 고속 영역에서도 릴럭턴스 토크를 이용하여 출력을 보장하지만 큰 전류각, 즉 큰 음의 D-축 전류를 요구한다. 이는 전동기가 고속으로 갈수록 제어의 어려움으로 나타난다. 그러므로 D-축 인덕턴스의 변화에 따른 고속 영역에서 전류 지령치의 변화를 분석한다. 고속 영역에서 전류크기 및 전류각을 감소하고 정출력 범위를 증가시킬 수 있는 D-축 인덕턴스를 조사한다. 시뮬레이션을 통하여 출력을 검증한다.