• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.191-195
• /
• 2000

Electrochemical properties of the oxygen electrode in phosphoric acid fuel cell have been studied using AC impedance method as a function of applied potential, operating temperature and teflon content in the electrode. The oxygen electrode reaction in the $105wt.\%$ phosphoric acid is characterized by a parallel resistive component, $R_p$ and a capacitive component, $C_p$ with serial electrolyte resistance, $R_s$. The conductivity of the phosphoric acid is found to be 0.31-0.47 S/cm in the range of $130\;to\;190^{\circ}C$ from the measured impedance. The increase of applied potential and temperature produced the decreased RP and the increased $C_p$, which means the increase of the oxygen electrode reaction rate. The single cells with the cathode of various teflon contents were tested, and the cathode with $40wt.\%$ teflon showed good performance, which is considered to be related to an optimized impedance behavior.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.241-252
• /
• 2018

This study explored the life of social workers by applying the photo Voice research method. Participants selected three themes through group discussions and shared the daily life of a social worker through photos they prepared in relation to each topic. Through this process, they shared their own experiences on 'difficulties related to work activities,' 'factors that create positive aspects that motivate social workers,' and 'factors that create negative aspects that demotivate social workers.' Using these three themes and 11 sub-themes, the participants shared their own experiences as social workers in the workplace. In order to improve the quality of life of social workers, we proposed amendments to related laws such as the Labor Standards Act, and also proposed legislative and institutional measures such as the enactment of policies related to personal safety threats.

• Clean Technology
• /
• v.14 no.3
• /
• pp.218-223
• /
• 2008

Decomposition of reactive organic compound dispersed in microemulsion media by hydroxide ions and proton ions generated during electrolysis was tried and the half-lifes for decomposition were compared. Absorbance of p-nitrophenoxide produced from the decomposition of p-nitrophenylacetate (PNPA) was followed to find the rate of decomposition. The applied voltage, temperature, and the amount of substrate were changed to see the effects on the decomposition rate. The advantages of electrolysis in microemulsion system were the high solubilizing capacity of substrate, easy control of decomposition rate, low operation cost, no need for any addition of chemicals, and no byproducts. The mechanism of decomposition and the application to water purification were discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.1-9
• /
• 2005

The interaction between hypersonic free stream and side jet flow at high altitudes is investigated by using the direct simulation Monte Carlo (DSMC) method. In order to alleviate the difficulty associated with the large density difference between the free stream and the side jet flow and to simulate the two flows simultaneously, a weighting factor technique is applied. For validation, the corner flow over a pair of plates perpendicularly attached is calculated with and without a side jet, and the results are compared with experiment. For a more realistic configuration, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet is injected into the free stream and the effect on the aerodynamic force and moment is observed at various flow angles. The lambda shock effect and the wake structure are studied in terms of the surface pressure differential. A higher interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

• Journal of the Korean Chemical Society
• /
• v.63 no.2
• /
• pp.73-77
• /
• 2019

We compared methodologies based on the density functional theory (DFT), e.g., time-dependent DFT (TD-DFT), TD-DFT within Tamm-Dancoff approximation (TDA-DFT), and spin-unrestricted DFT (UDFT), that are usually employed to optimize the geometries of ${\pi}$-conjugated molecules in their lowest lying triplet excited ($T_1$) state. As a model system for ${\pi}$-conjugated molecules, we employed 1,2,3,4,5-pentacyano-6-phenyl-benzene. In conjunction with 6-31G(d) basis sets, we made use of gap-tuned range-separated ${\omega}B97X$ functional which is often employed recently in the calculations of molecular excited states. Near the equilibrium geometries, we found that the important difference between the geometries derived at UDFT level and those at TD-DFT or TDA-DFT methods: more stable ground-state energies but higher triplet excitation energies for UDFT derived geometries. In the studies, we discuss such differences in more detail.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.1
• /
• pp.139-155
• /
• 2023

The purpose of this study is to improve the digital literacy of pre-service home economics education teachers by designing and applying 'teaching materials and methods of home economics education' class using the Metaverse platform in virtual classes during the Covid-19 pandemic. For this purpose, six lessons of the 'Teaching Materials and Methods of Home Economics Education' classes were designed and applied as a class using the Metaverse platform, and the effectiveness was analyzed. In this study, three types of classes(TBL, discussion, and PBL) were developed and evaluated. The results of the study showed that most of the learners were satisfied with the classes utilizing the Metaverse platform, and the effectiveness of the classes was shown in terms of learner-instructor interaction and the realism of actual classroom cases. Based on these results, it is expected that various home economics education classes utilizing metaverse platforms will be developed and applied to school sites to increase the realism of lessons.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4C
• /
• pp.185-191
• /
• 2010

Volumetric pressure plate extractor (VPPE) can be used for measurement of the soil-water characteristic curve in the laboratory using the axis-translation technique. The volume of extracted water from the soil specimen in VPPE can be measured continuously during the test without stoppage of air pressure for the measurements. However, the water volume measurement in VPPE using an air trap, a ballast tube, a burette, and a vacuum device so as to maintain a constant pore-water pressure in the soil specimen, is quite complicated and tedious. In order to improve the measuring problems of VPPE, a modified volumetric pressure plate extractor (MVPPE) was developed and tested on residual soil specimens. In addition, the modified apparatus can measure the volume of the extracted water using both Method A and Method B of ASTM D 6836-02 depending on the range of matric suction. Measuring principles and the improvements of MVPPE and typical results obtained from the tests are discussed in the paper.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.209-217
• /
• 2020

The background of the research is the following. With the prosperity of drone industry, the government has been actively promoting measures to nominate 'drone photographing free areas'. However, existing laws, and procedures are rather unclear with related environmental factors in discordance with one another. Hence, voices in need for establishing a clear precondition for nominating drone photography free area have been rising. The purpose of the research is to provide measures for the preconditions to establish photography free areas for convenient drone photographing. The research utilizes literary methods, conducting focus group interviews to coordinate with specialists who can participate and discuss so that they can provide improvement measures. The research renders improvement measures in different sectors including 2x items in aviation security law, 8x items in free area nomination and procedure, 4x items in infrastructure establishment and information management area. The expected effects are the following: by attaching drone photography with aviation security law, nominating photography free area can be linked up with the Ministry of Land Infrastructure and Technology. Secondly, by enlarging photography restricted area to upper mid-air, a three dimensional drone security will be possible. Thirdly, by providing a 'Yongin area standard model', free area nomination will become more easy. Future research will focus on enhancing aviation security law regarding drone photographing. In addition, the promotion to nominate free areas for 33x responsible areas in accordance with the National Intelligence service will be required.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.7
• /
• pp.31-40
• /
• 2012

In most design codes, soils are classified as either sandy or clayey soils, and appropriate design equations for each soil type are used to estimate their soil behaviour. However, sand-fine mixtures, which are typically referred to as intermediate soils, are somewhere at the middle of sandy or clayey soils, and therefore a unified interpretation of soil behaviour is necessary. In this paper, a series of cyclic shear tests were carried out for three different combinations of sand-fine mixtures with various fines content. Silica-sand mixture and fines (Iwakuni natural clay, Tottori silt, kaolinite) were mixed together with various mass ratios, while paying attention to the changes of void ratios expressed in terms of sand structure. The cyclic shear strengths of the mixtures below the threshold fines content were examined with the increasing fines contents. As a result, as the fines contents increased, their cyclic deviator stress ratios decreased for dense samples while it increased for loose samples. Additionally, cyclic deviator stress ratio of the mixtures was estimated using the concept of equivalent granular void ratio.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.143-147
• /
• 2006

This study was carried to investigate the effect of soil texture on the growth and the contents of quercetin-glycoside and lignans, and to improve the qualities of Saururus chinensis Baill. Soil texture resulted no significant effects on the number of nodes, the number of leaves, the number of branches and dry matter ratio. However, the shoot dry weight was higher in sandy loam, loam, silt loam and sand soil in that order. Although the weight of rhizomes of below 5 mm in diameter was not significantly different among soil textures, the weight of rhizomes between 5.1 and 10.9 mm and the weight of rhizomes of above 11 mm in diameter ranged $437{\sim}465\;g$ and was larger in clay loam than in other soil textures. No significance difference was showed in rhizome dry ratio ranging from 19.1 to 20.8%. The amount of quercetin-glycoside in leaves was higher in loam and sandy loam and ranged from 219.3 to 222.4 mg/100 g of quercetin-glycoside quercitrin, rutin, isoquercitrin and hyperin were higher in that order. On the other hand, quercetin-glycoside contents in stem were 14.8 mg/100 g and 12.4 mg/100 g in sandy and sandy loam, respectively, and were higher than in other soil textures of quercetin-glycoside constituents, the content of rutin was the highest. The content of lignans was increased in clay loam, loam, sandy loam, and sandy in that order of lignans, the manassatin B was the highest.