• Journal of Biosystems Engineering
• /
• v.21 no.4
• /
• pp.414-421
• /
• 1996

한국과 일본의 경우 건표고를 외관의 품질상태 에 따라 12등급에서 16등급으로 구분하고 있다. 그리고 등급판정 작업은 임의로 추출한 샘플을 대상으로 전문 감정가에 의해 수작업으로 수행되고 있다. 건표고의 품질을 결정짓는 외관의 품질인자들은 갓과 내피에 고루 분포하고 있다. 본 논문에서는 컴퓨터 영상처리 시스템에 의거하여 개발한 건표고 자동 등급판정 및 선별 시작시스템의 구조와 기능 그리고 성능에 대하여 설명하였다. 개발한 시작시스템은 표고의 이송과 취급자동화를 위한 진동이송기, 반전장치, 컨베이어 이송장치와 두 세트의 컴퓨터 영상처리 시스템, 그리고 시스템 통괄제어를 위한 IBM PC AT호환 컴퓨터, 디지털 입출력 보드, 전공압실린더 구동제어를 위한 PLC등으로 구성하였다. 등급판정의 효율성 및 실시간 작업시스템을 고려하여 건표고의 등급판정은 두 세트의 컴퓨터 영상처리 시스템을 이용하여 이송되는 건표고의 갓 또는 내피 중 어디가 위를 향하는 지에 따라 두 단계에 걸쳐 독립적으로 판정을 수행하도록 하였다. 첫 번째 영상처리부에서는 갓표면 영상으로부터 4등급의 고품질 표고를 분류하며 두 번째 영상처리부에서는 내피표면 영상으로부터 중간 및 저품질 표고를 8개의 등급으로 분류한다. 실시간 영상정보처리를 목적으로 기존에 개발한 신경회로망을 이용한 등급판정 알고리즘을 시작시스템에 적용하였다. 개발한 시작기는 88% 이상의 등급판정 정확도를 보여 주었으며, 전공압시스템의 구동제약으로 인하여 표고 1개당 약0.7초의 선별시간이 소요되었다. 일조 선별라인의 경우 본 연구에서 제안한 시작기의 선별능력은 표고가 일차 처리부로 갓이 위로 올라와 있는 상태로 계속 공급된다면 시간당 대략 5,000여 개의 표고를 처리할 수 있을 것으로 기대된다.보강하여 가능하면 B-Pillar의 Middle이 Bending type collapse을 방지하여 Pelvis와 Door가 먼저 접촉하는 방법 등이 적용가능하다. 제작하기 이전에 설계된 부품에 대한 스프링 상수 및 내구특성을 체계적으로 규명하여 제품 시험의 횟수를 줄이고, 보다 정밀한 제품을 제작할 수 있도록 하기 위한 것이다.세포수는 초기 배반포기배에서 팽윤 배반포기배로 진행됨에 따라 두배에서 세배 정도 증가되었음을 알 수 있었다. 또한, differential labelling과 bisbenzimide기법에서 얻어진 각각의 총세포수를 비교하였을 때 총세포수는 발달의 진행 정도에 따라 증가되며 그와 동시에 동일한 군 간의 세포수도 거의 유사함을 알 수 있었다. 따라서, ICM과 TE를 differential labelling하는 기법은 수정란의 quality를 평가하는데 매우 유용한 기법으로서 착상전 embryo 발달을 연구하는데 효과적으로 이용될 수 있다는 것을 시사한다. 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.431-440
• /
• 2013

It was tested in field that a Pull-out Capacity and Shear resistance strength change of reed, common reed and sedge which were planted by mat-type turf and used for revegetation of bank. The testes were done for 9 weeks from end of May and the grasses were planted on sandy soil. Roots grew fastly after planted and increasement of a common reed and sedge root were reduced after 4 weeks but increasement of reed roots were not reduced. The difference of increasement of roots is due to a difference of propagation method. Sedge propagate by seed. Reed and commom reed propagate by seed and subterranean stem and reed has bigger subterranean stem than common reed. So increasement of common reed and sedge roots were slow than reed. By root growth pattern, increasement of pull-out capacity and shear resistance strength showed very similar way of root growth, those of common reed and sedge were fast in early stage of cultivation but were reduced. But increasement of pull-out capacity and shear resistance strength of reed was not reduced. A Maximum shear resistance strength called critical shear resistance strength of common reed and sedge can be Analyzed at 11 weeks after planted.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.51-55
• /
• 2005

Chinese leymus (Leymus chinensis Trin.) is a perennial grass that is widely distributed at high pH sodic and arid soil in the northeastern Asia. An efficient regeneration system was established through somatic embryogenesis of mature seeds to understand its high adaptability to harsh environmental conditions on the basis of molecular biology. The calli were efficiently induced (about $70\%$) from mature seeds on MS medium supplemented with $1.5\;\cal{mg/L}$ 2,4-D. Somatic embryos were formed from the surface of embryogenic callus on MS medium supplemented with $2.0\;\cal{mg/L}\;kinetin\;and\;0.5\;\cal{mg/L}$ NAA after 3 weeks of culture. Roots were induced from the shoot when transferred to MS medium without plant growth regulator for 1 week. Plant regeneration rate was $36\%$ and regenerated plantlets were grown to normal mature plants in pot. An efficient plant regeneration system in this study will be useful for molecular breeding of L. chinensis.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2011

Simazine (6-chloro-N,N'-diethyl-1,3,5-triazine-2,4-diamine) is a triazine herbicide that has been applied worldwide including Korea for agricultural purposes. Simazine is the second most commonly detected pesticide in surfaceand ground-water in the United States, Europe and Australia. It has been shown that simazine is a potent endocrine disruptor in wildlife and laboratory animals. Although many endocrine disruptors can induce apoptosis in various types of cells, the effects of simazine on apoptosis and on the expression of Bcl-2 family genes are not known. Also it is unknown the effect of simazine on the expression of steroidogenesis-regulating genes in testicular cells. In this study, we investigated the effect of simazine on the expression levels of apoptosis- and steroidogenesis-regulating genes in testicular cells. We found that a low concentration of simazine can alter the mRNA expression levels of steroidogenesis-related genes and Bcl-2 family genes in mouse Sertoli cells and rat Leydig cells. Thus, our results suggest that simazine can disturb normal testicular development and reproductive function by altering the expression of genes that are critical for the regulation of apoptosis and steroidogenesis.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.197-212
• /
• 2020

This study was carried out material characteristics and firing conditions for some potteries in early and middle Neolithic period at the Munamri sites, where the first farmland remails were found in Korea. It is divided into six kinds of surface patterns for potteries such as the raised, bamboo tube and red painted (patternless) from the early Neolithic period (BC 4000 to 6000), and the patterns of horizontal herringbone, short slanted lined or lattice and incised thick line in the middle Neolithic period (BC 3000 to 4000), respectively. Based on the color measures, redness and yellowness of potteries were relatively high as condition of oxidation firings, were also observed black cores on the cross section of potteries. The firing temperature is divided into two groups having under 800℃ and 800to 900℃, the difference in patterns of the potteries are not confirmed. As a microtextures, the bamboo tube pattern potteries show the sericitization biotite, the quartz have developed a suture line textures, and altered alkali feldspars are occurred. X-ray diffraction analysis shows that the main minerals contained in potteries are chlorite and amphibole besides quartz, alkali feldspar and biotite. Considering the geology around the Munamri area is the biotite amphibole granite and soil layers within 10km radius are used as the raw materials for the potteries. The raw materials are presumed that the sources from the metamorphic rocks along the water systems through the mountains around the sites on the basis of well developed suture line textured quartz in potteries. Results on normalized geochemical compositions, the potteries by surface patterns are very similar to sources, and it is judged that was made by using the surrounding soils despite the long time difference from the early to middle in the Neolithic period.

• Journal of the Korean earth science society
• /
• v.33 no.4
• /
• pp.320-328
• /
• 2012

To investigate geomorphic development of alluvial plains and climatic environment change during the late Holocene carbon dating, soil organic carbon analysis and humus analysis of sediments from alluvial plain of Hampyeongcheon basin were performed. The lowest peat layer was formed under warm and humid climates, which is considered to correspond to the Atlantic period in the Holocene. Yellowish brown sandy clay layer was deposited in the natural levee, which we think were deposited in the generally warm and dry climates. The carbon dating age is 1,879-1,532 BC, and this period correspond to the Sub-boreal period in the Holocene. Light brown clay layer is assumed to have been deposited in transitional environment from the natural levee to the back marsh. The climatic environment was warm and humid, which is considered as transitional period from the Sub-boreal to the Sub-Atlantic in the Holocene. Light yellowish brown and light brown clay layer of the upper part are regarded as sediments of the back marsh. Light yellowish brown clay layer was deposited in the cold and dry climates, which is considered to correspond to the Sub-Atlantic period in the Holocene. Light brown clay layer was deposited in the warm and dry climates. The carbon dating age is 211-427 AD, this period corresponds to the Post Roman Warm Period in the Holocene.

• Journal of Plant Biotechnology
• /
• v.44 no.3
• /
• pp.320-324
• /
• 2017

Development of modern agricultural machinery and accompanying agricultural development cause soil compaction and reduce growth by stressing roots. Kalanchoe pinnata was used to investigate the impact of stress on rooting and changes in plant growth and reproduction. K. pinnata forms somatic embryos capable of asexual reproduction at the edge of leaves. Impact of root pressurization of K. pinnata on somatic embryogenesis and organ differentiation according to external stress factors was investigated by using a high concentration of agar and this phenomenon was studied histologically. Agar concentration in culture media ranged from 0.5%-1.5% to induce a compression effect on roots. The stem and leaf of K. pinnata were subjected to a microtechnique process to study changes in tissue. In vivo, K. pinnata produced 2nd and 3rd plantlets at edges of leaves from lack of water and excessive lighting conditions. In in vitro culture studies, the lower the concentration of agar, the higher the population and the higher the biomass, but plantlet did not occur in leaf bends. Conversely, as concentration of agar increased, increase in the number of individuals was low. Plantlet development occurred only in agar 1.5% medium. The difference in agar concentration was a stressor in the root of K. pinnata, and thus the pattern of asexual reproduction changed from the division method in root to a plantlet generation in leaf. This suggests root pressurization may act as stress and change in the plant reproduction pattern.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.53-68
• /
• 1996

마그네슘이 자동차 경량화에 관심이 되는 이유는 근본적으로 CAFE 규제와 같이 경량화를 통한 화석연료의 소모를 크게 억제해야 한다는 사회적인 규제이나, 지난 10여년간의 기술발전으로 내식성이 나쁘다거나 취급이 위험한 금속이라는 인식이 크게 개선된 데에도 있다. 다른 경량금속에 대한 Mg 지금 가격의 비교조건이 호전되었고 향후 원소 재공급의 다변화가 추진되고 있는 것도 환경을 변화시킨 중요한 요인이다. 그간 중요한 경량화 대체 재료로 연구투자가 많았던 유기고분자 재료 및 FRP 등과 같은 복합재료는 폐기부품의 재활용이 어려움 때문에 호나경친화적인 단점이 부각되어, 이 소재의 증가가 주춤해 있다. 마그네슘의 경우에는 재활용이 가능하고, 진동흡수효과가 매우 커서 소음발생을 크게 줄일 뿐만 아니라, 주행 및 내구성시험에서 치수안정성이 좋고 많은 종류의 전자기기 사용에 의한 전자파 차폐효과도 큰 장점을 가지고 있다. 본 고에서는 Mg 다이캐스팅으로 자동차부품의 경량화 현황과 선진국에서 보는 전망을 미국을 중심으로 정리하고, 이와 관련한 Mg 다이캐스팅으로 자동차부품의 경량화 현황과 선진국에서 보는 전망을 미국을 중심으로 정리하고, 이와 관련한 Mg 기술적인 이슈와 시장전망도 서술하였다. 그리고 현재 우리나라의 연구계와 부품업계에서 추진하고 있는 연구개발 동향을 자동차 업계에 소개하는 의미도 있다. 이처럼 우리나라의 현황을 정리해 보는 것은 국내 자동차 산업이 국제적인 경쟁을 하고 있고 Mg기술과 원료확보에서 일본의 견제를 받고 있는 우리의 현실에서도 필요한 작업으로 생각된다.값들로 구성되는 형상을 내구 성능, 성형성등을 고려하여 최종 형상으로 결정한다. 내구성능의 예측은 금속부품의 내구수명 예측에 널리 이용되고 있는 방법이 방진 고무부품의 경우에도 적용 가능한지를 검토하고, 방진 고무부품에도 일반적으로 적용될수 있는 내구수명 예측방안의 개발 가능성을 타진해 보았다. 본 연구의 목표는 시제품을 제작하기 이전에 설계된 부품에 대한 스프링 상수 및 내구특성을 체계적으로 규명하여 제품 시험의 횟수를 줄이고, 보다 정밀한 제품을 제작할 수 있도록 하기 위한 것이다.세포수는 초기 배반포기배에서 팽윤 배반포기배로 진행됨에 따라 두배에서 세배 정도 증가되었음을 알 수 있었다. 또한, differential labelling과 bisbenzimide기법에서 얻어진 각각의 총세포수를 비교하였을 때 총세포수는 발달의 진행 정도에 따라 증가되며 그와 동시에 동일한 군 간의 세포수도 거의 유사함을 알 수 있었다. 따라서, ICM과 TE를 differential labelling하는 기법은 수정란의 quality를 평가하는데 매우 유용한 기법으로서 착상전 embryo 발달을 연구하는데 효과적으로 이용될 수 있다는 것을 시사한다. 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at%

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.181-187
• /
• 2014

Forest floor is one of most distinctive features of forest ecosystem, which provides plants and soil microbes with nutrients, and controls hydrologic condition within the floor by intercepting water during a rainfall event and evaporates back into the atmosphere. In this study rainfall interception loss by decomposed forest floor of a deciduous forest has been experimentally estimated using rainfall simulation experiments. Litter-decomposing fungi were incubated on deciduous forest floor samples for the experiment purposes. On a deciduous floor, a $4.22mm{\cdot}kg^{-1}{\cdot}m^2$ of rain was intercepted immediately before rain ceased. Minimum values of interception loss ranged from 1.62 to $2.41mm{\cdot}kg^{-1}{\cdot}m^2$, with an average of $1.87mm{\cdot}kg^{-1}{\cdot}m^2$. Mann-Whitney test showed that decomposing fungi on the forest floor influenced on rainfall interception capacity.