• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1186-1190
• /
• 2009

In this paper, we studied on a characteristic of movement of charged particle in equal electric field. In order to fabricate a panel, we used positive charged toner particles of black and negative one of yellow. Panel was biased rectangle pulse without any overshoot. Also, panel's optical characteristics with contrast ratio and viewing angle is measured with RT-200. Response time was measure by using incident laser and detective photodiode. The distribution of m/q of particles by driving in panel throughout the contrast ratio and response time. As a results, driving voltage, contrast ratio, and response time are decided by m/q of charged particles and when m/q of charged particles in panel have regular distribution, it is induce improvement driving characteristics.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.75-80
• /
• 2005

Study for toner adhesion is known as an important role in electrophotography. In this research, a centrifugal detachment method was used to measure the adhesion force of several hundred particles simultaneously and to determine its sensitivity to particle size. For uncharged toner particles, we estimated the van der Waals force based on the centrifugal farce experiments. Then for charged toner particles, the centrifugal force experiments were carried out. The difference between the results for charged toner particles and the results for uncharged toner particles was compared with the image force calculated from a model which assumed that the toner charge was located at the center of the particle. In the calculations, experimental data obtained by E-SPART (Electrical- Single Particle Aerodynamic Relaxation Time) analyzer were used. The adhesion force of micro-sized toner particles deposited on the DR surface was found to be approximately 1${\~}$3 nN.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.105-110
• /
• 2006

Study for toner adhesion is 3non as an important role in electrophotography. In this research, a centrifugal detachment method was used to measure the adhesion force of several hundred particles simultaneously and to determine its sensitivity to particle size. For uncharged toner particles, we estimated the van der Waals force based on the centrifugal force experiments. Then for charged toner particles, the centrifugal force experiments were carried out. The difference between the results for charged toner particles and the results for uncharged toner particles was compared with the image force calculated from a model which assumed that the toner charge was located at the center of the particle. In the calculations, experimental data obtained by E-SPART (Electrical-Single Particle Aerodynamic Relaxation Time) analyzer were used. The adhesion force of micro-sized toner particles deposited on the DR surface was found to be approximately $1{\sim}3$ nN.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.192-196
• /
• 2003

폴리비닐알코올[poly(vinyl alcohol)(PVA)]은 1924년에 Herrmann과 Haehnel이 폴리아세트산비닐[(poly(vinyl acetate)(PVAc)]의 비누화 도중 처음 합성되었으며, 2차 세계대전 이후 일본에서 비닐론 섬유용 수지로 상업화되기 시작했다. PVAc의 비누화로부터 제조되는 PVA는 흰색의 분말상 고분자로 필름 및 섬유의 형성이 용이하고 표면 활성도가 높으며, 기계적 성질 및 접착 강도가 높고, 용해도와 화학적 반응성이 우수하다. (중략)

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.222-231
• /
• 2009

Shirasu-porous-glass (SPG) membrane emulsification is highly attractive in the field of toner industries, foods and drug delivery systems because of its easy control of particle size in micro-scale, narrow size distribution and multiple emulsion. The particle size and morphology of emulsion droplets can be controlled by changing the type of initiators, additives, monomers, crosslinkers and inhibitors in SPG membrane emulsification. In this paper, principles of SPG membrane emulsification, influence of process parameters and industrial applications have been addressed.

• Clean Technology
• /
• v.19 no.3
• /
• pp.249-256
• /
• 2013

The experiments have been performed to obtain zinc complex compound with smaller particle sizes, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation and the triboelectric charge of zinc complex-compound particle with different sizes. Reactants such as zinc chloride and 3,5-di-tert.-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Aluminium(III) chloride has been mixed in the zinc chloride solution beforehand to restrain the particle size from growing. When PEG-300 and aluminium(III) chloride are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from $5.28{\mu}m$ to $2.33{\mu}m$, which was 44.1% of $5.28{\mu}m$.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2012

The experiments have been performed to obtain zinc complex compound with smaller particle size, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation of different sizes of zinc complex-compound particle. Reactants such as zinc chloride and 3,5-di-tert-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Zirconium (IV) oxychloride octahydrate has been mixed in the zinc chloride solution beforehand to restrain crystals from growing. When PEG-300 and zirconium (IV) oxychloride octahydrate are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from 5.28 to 1.84 ${\mu}m$, which is 34.9% of 5.28 ${\mu}m$.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.8-17
• /
• 2003

In order to investigate the possibility of PVA particle as toner, PVA/PVAc particle was manufactured. Fine spherical PVAc particle with emulsifier SDS(sodium Dodecyl Sulfate) and initiator V-50(2,2'- azo bis(2-amidinopropane) dihydrochloride) was manufactured by emulsion polymerization. And then, the PVAc was carried with surface saponification. PVA/PVAc skin core structured particle was obtained under optimum saponification condition. PVA skin side in manufactured PVA/PVAc particles was dyed with 1:2 metal complex type C. I. Acid Yellow 235 and then the dyed PVA particles were observed with a optical microscope. Under given polymerization condition such as SDS concentration, $1.62\times{10}^{-2} \;mol/lH_2O$, V-50 concetration, $3.7\times{10}^{-3}\;mol/lH_2O$ and temperature $50^\circ{C}$ , the high molecular weight of PVAc with Pn 13,900 and PVA with Pn 3,400 was produced. The particle distribution of obtained PVAc microspheres was appeared highly at 60 and $100\mu{m}$, respectively.

• Resources Recycling
• /
• v.9 no.5
• /
• pp.28-32
• /
• 2000

In this study, the new processing method to produce magnetite for mono-component black toner was studied using spray roaster. The produced magnetite is compared with TMB 125 made by Magnox, USA. When the weight ratio of the ferrous chloride and the ferric chloride is varied from 3:7~7:3 under $N_2$ atmosphere, the 100% major phase of magnetite is obtained. However, when the content of he ferrous chloride is higher than 70wt%, the content of FeO is increased. The phase of $\Gamma-Fe_2O_3$ is shown in th range of over 70wt% of the ferric chloride. The magnetite produced by spray roasting has a saturation magnetization of 80~85 emu/g and a coercivity of 110~130 Oe. The shape of the particle is irregular sphere and hte size of the magnetite is the range of $0.3~0.5\mu\textrm{m}$. It is shown that the magnetite made by spary roasting is enough to apply to the magnetic material of toner.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.159-164
• /
• 2015

Pigment yellow 180 (P.Y.180), a kind of benzimidazolone, has been widely used in various industrial fields of ink, paint, plastics, toner, and color filter, etc. This is a high performing pigment that is a greenish yellow shade with excellent properties such as heat resistance, solvent resistance, acid resistance and alkali resistance. In this study, pigment compounds were synthesized using various coupling reaction temperature condition. The properties of samples crystallized under various solvents and temperature conditions using autoclave pressurizer were also investigated. The pigment crystallized using DMSO solvent treatment showed the improvements such as the increase of X-ray intensity ratios and particle size, high color strength, and enhanced dispersibility.