• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.90-91
• /
• 2003

대부분의 가공기 혹은 측정기에 있어 이송테이블은 그 기능수행의 기본을 담당하고 있으며 이송테이블의 운동 정밀도와 고속화는 목표하는 정밀도와 생산성으로 직결된다. 종래에는 형상특성, 열변형 등의 계통 오차만을 오프라인(Off-line)으로 측정하고 소프트웨어적으로 보상하는 방법을 사용하였으나 초정밀 분야에서 요구되는 테이블의 운동정밀도는 기계적 강성한계를 넘는 정밀도이므로, 테이블 이송 시 발생하는 운동오차를 실시간으로 측정하고, 보상할 수 있는 온라인(On-line)개념의 능동형 보상이 필요하다. (중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.204-207
• /
• 1993

현대는 급속히 발전하는 공업을 바탕으로 생산품의 고기능화, 고정도화, 고속화를 추구하고있다. 그중에서도 고정도화에 대항 요구는 초정밀 가공 분야의 경우 2000년대 초에는 수 nm 수준까지 도달할 것으로 예측된다. 현재 각 선진국에서는, 초정밀도의 형상 정밀도를 요구하는 대형 광학 부품들의 가공에대한 연구가 진행중이며, 이와 같은 연구에서 요구되는 가공 정밀도가 조만간 가공기의 강성한계에 도달할 것이다. 이와함께 초정밀 가공에 있어서, 이송 테이블의 운동오차는 심각한 문제로 대두되고 있으므로, 테이블의 운동오차의측정 및 실시간 보상에 대한 연구의 의미가 있을 것으로 생각된다. 본 연 구는 기계 이송 테이블의 기하학적 운동오차의 실시간보상(real-time correction)에 관한 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.672-676
• /
• 2004

In this paper, measuring system of 5 DOF motion errors are proposed using two capacitive type sensor, a straight edge and a laser interfoerometer. Yawing error and pitching error are measured using the laser interferometer, and rolling error is measured by the reversal method using a capacitive type sensor. Linear motion errors of horizontal and vertical direction are measured using the sequential two point method. In this case, influence of angular motion errors is compensated using the previously measured angular motion errors. In the horizontal direction, measuring accuracy is within 0.05 $\mu$m and 0.27 arcsec, and in the vertical direction, it is within 0.15 $\mu$m and 0.5 arcsec. From these results, it is confirmed that the proposed measureing system is very effective to the measurement of 5 DOF motion errors in the ultra precision feed tables.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.64-71
• /
• 2002

A new model utilizing a transfer function was proposed in the previous paper fur analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called ‘averaging effect of oil film’. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.454-458
• /
• 2001

A new model utilizing a transfer function was proposed in the previous paper for analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called 'averaging effect of oil film'. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.114-120
• /
• 1997

For compensating the error motion of hydrostatic tables, we have introduced a way that the clearance of table is controlled corresponding to the amount of eror with the actively controlled variable capillary, named as ACC. In previous paper, through the basic test, it was confirmed that by the use of ACC, the error motion within 2.7$\mu$ m of a hydrostatic table could be compensated with the resolution of 27nm, 1/100 contollable range, and with the frequency bandwidth of 5.5Hz, structurally. In this paper, we performed practical compensation of the linear and angular motion error of hydrostatic table using ACC. For improving the compensated motion accuracy, iterative control method is put into the control system. The experimental results show that by the simultaneous compensation of error, the linear and angular motion error are improved upto 0.25$\mu$ m and 0.4arcsec, which are about 1/10 and 1/3 of the non-compensated motion errors respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.839-840
• /
• 2012

본 논문에서는 3 축 기계장비의 공간오차를 예측하기 위한 사전 단계로 각 축에 대하여 레일형상오차를 측정하였다. 전용 측정지그를 설계/제작하여 이 지그가 이동함에 따라 혼합축차이점법을 이용하여 레일형상오차를 측정하였다. 레일형상오차로부터 테이블 운동오차를 예측하고, 이와 더불어 각 축 사이의 직각도 오차를 측정한 후 이로부터 최종적으로 3 축 장비에 대한 공간오차를 평가할 예정이다. 예측된 공간오차는 실제 레이저를 이용한 공간오차 측정방법을 이용하여 검증할 예정이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.658-662
• /
• 2000

In order to achieve systematical method for improving motion accuracy of hydrostatic table, an algorithm using finite element method is proposed in this paper. Quantification of averaging effect of oil film on motion error is performed theoretically by analysis on the relationship between spacial frequency of rail form error and motion error of table. Influences of film stiffness and pocket size on the motion error of table are also analyzed theoretically Validity of the algorithm is verified experimentally from the test on the motion error of table with three types of rail which have different form profile. Experimental results show that the algorithm is very effective to analyze theoretically the motion error of hydrostatic table.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.137-144
• /
• 2000

In order to achieve systematical method for improving motion accuracy of hydrostatic table, an algorithm using finite element method is proposed in this paper. Quantification of averaging effect of oil film on motion error is performed theoretically by analysis on the relationship between spacial frequency of rail form error and motion error of table. Influences of film stiffness and pocket size on the motion error of table are also analyzed theoretically. Validity of the algorithm is verified experimentally from the test on the motion error of table with three types of rail which have different form profile. Experimental results show that the algorithm is very effective to analyze theoretically the motion error of hydrostatic table.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.135-141
• /
• 2005

Measurement of five DOF motion errors in a ultra precision feed table was attempted in this study. Yaw and pitch error were measured by using a laser interferometer and roll error was measured by using the reversal method. Linear motion errors in the vertical and horizontal directions were measured by using the sequential two point method. In this case, influence of angular motion errors was compensated by using the previously measured ones by the laser interferometer and the reversal method. The capacitive type sensors and an optical straight edge were used in the reversal method and the sequential two point method. Influence of thermal deformation on sensor jig was investgated and minimized by the periodic measurement according to the variation of room temperature. Deviation of gain between sensors was also compensated using the step response data. 5 DOF motion errors of a hydrostatic table driven by the linear motor werer tested using the measurement method. In the horizontal direction, measuring accuracies for the linear and angular motion were within ${\pm}0.02\;{\mu}m$ and ${\pm}0.04$ arcsec, respectively. In the vertical direction, they were within ${\pm}0.02{\mu}m$ and ${\pm}0.05$ arcsec. From these results, it was found that the introduced measurement method was very effective to measure 5 DOF motion errors of the ultra precision feed tables.