• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.42-47
• /
• 1987

4 strains of the oak mushroom Lentinus edodes including the strain ASI 3046 were collected home and abroad to investigate the characterics of mycelial growth on synthetic media and sawdust media. The possibility of artificial culture of Lentinus edodes on media composed of different saw dusts and adding materials was investigated. Results were as follows: The optimum temperature for growth ranged from $22^{\circ}C$ to $26^{\circ}C$ among the lineages of Lentinus edodes. The optimal growth temperature for ASI 3046 strain and ASI 3047 strain was $26^{\circ}C$ and $22^{\circ}C$, respectively. The optimal carbon source for ASI 3046 strain was glucose, and peptone and ammoinum tartrate were proved excellent as nitrogen sources. When Lentinus edodes was cultured on sawdust media by varying the mixing ratio of different sawdusts and adding materials, mixed sawdust media composed of oak sawdust(50%, v/v), poplar sawdust(50%, v/v), acorn powder(5%, v/v) and rice bran(10%, v/v) showed higher yields of fruit bodies. Results showed that the ideal strain of Lentinus edodes for artificial culture on sawdust media was strain ASI 3046.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.45-50
• /
• 2008

This study was carried out to investigate the promoting effect of wood flour on the mycelial growth of Lentinus lepideus and Lentinus edodes. To determine the optimal culture condition, we first examined the tissue origin of pine flour (Pinus densiflora) including needle, bark, root and xylem. Only the xylem-derived flour increased mycelial growth compared to no treatment control. The addition of the xylem flour (5 g/l) showed the highest increase and the glucose level in the basal medium was best at 10 g/l. The smaller particle size of the xylem flour showed the positive effect on mycelial growth; two-fold increase when supplemented with flour of which particle size is less than $106\;{\mu}m$ in diameter compared to $425\;{\mu}m$. The addition of the xylem flour continuously increased the mycelial production for 25 days while mycelia stopped growing within 15 days without the xylem flour. In addition, when woody flour obtained from the different tree species was applied to L. edodes mycelial culture, all treatments accelerated mycelial production compared to the control. Based on all results described above, we conclude that the supplementation of woody flour to culture medium may be an another promising way to increase mycelial production of economically important fungi.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2001

Isolation and Characterization of Cathepsin B inhibitor Produced by Streptomyces luteogriseus KT-IO. Han, Kil~Hwan and Sang~Dal Kim*. Department of Applied Microbiology, Yeungnam Universit}/t Kyongsan 712749, Korea - The cathepsin B inhibitor produced by Streptomyces luteogriseus KT-IO was very stable in heat, acidic and alkaline conditions. The cathepsin B inhibitor was isolated from the extracted fraction of culture broth with butanol, methanol and chloroform subsequently, the inhibitor was purified with following several column chromatography sLlch as DEAE-Sephadex A-25, Sephadex G-15, silica gel 60, Sephadex LH-20, and preparative HPLC. The cathepsin B inhibitor showed positively to detective reaction of ninhydrine, 5% H2S04, iodine, but negatively to the reaction of Ehrlich's reagent, DNS, aniline. The molecular formular of cathepsin B inhibitor was elucidated by JR, lH and 13C-NMR, FAB mass and elemental analyzer. Consequently, it was identified as C4HlI04N6. The cathepsin B inhibitor had the mode of competitive inhibition with the reaction of cathepsin B.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1319-1330
• /
• 2000

Activated carbons prepared by chemical activation of organic waste sludges with $ZnCl_2$ and $K_2S$ have been studied in terms of their pore development and adsorptivity. Pore development of the carbons prepared from organic waste sludges was characterized by the nitrogen adsorption at 77K. The $ZnCl_2$-activated carbon produced by chemical activation with zinc chloride exhibited type I isotherm characteristics according to the BDDT classification, suggesting the presence of micropores formed by activation process. The isotherms of the commercial powdered activated carbon and $K_2S$-activated carbon reveal a hysteresis similar to that of type IV in BDDT classification, indicating the formation of mesopores. This result implies that the major pores of $K_2S$-activated carbon are composed of meso and micropores, and a macropores are minor. The adsorptive capacities of metal on the $K_2S$-activated carbon prepared from organic waste sludges were found to be superior to those on a commercial granular activated carbon. The Langmuir and Freundlich isotherms yield a fairly good fit to the adsorption data, indicating a monolayer adsorption of metals onto $K_2S$-activated carbon. The adsorptive capacity of the $K_2S$-activated carbon was superior to $ZnCl_2$-activated carbon for $PO_4$-P, and vice versa for $NO_3$-N. From the results of the studies reported here, it can be concluded that activated carbons with adsorptivity superior to commercial granular activated carbons can be produced from organic waste sludge using a two-step carbonization/activation procedure with zinc chloride or potassium sulfide as the activating agents.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2012

$Li_3V_2(PO_4)_3$/carbon composite materials are synthesized from a sucrose-containing precursor. Amorphous $Li_3V_2(PO_4)_3/C$ (a-LVP/C) and crystalline $Li_3V_2(PO_4)_3/C$ (c-LVP/C) are obtained by calcining at $600^{\circ}C$ and $800^{\circ}C$, respectrively, and electrochemical performance as the negative electrode for lithium secondary batteries is compared for two samples. The a-LVP electrode shows much larger reversible capacity than c-LVP, which is ascribed to the spatial $Li^+$ channels and flexible structure of amorphous material. In addition, this electrode shows an excellent rate capability, which can be accounted for by the facilitated $Li^+$ diffusion through the defect sites. The sloping voltage profile is another advantageous feature for easy SOC (state of charge) estimation.

• Clean Technology
• /
• v.20 no.3
• /
• pp.205-211
• /
• 2014

Biomass-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. This article described the effect of the additions of oxo-biodegradable additive, 4 kinds of plant biomass, unsaturated fatty acid, citric acid in the properties of polyethylene films. Bio films were prepared using a variety of biomasses and tested for feasibility as a food packaging film. Mechanical properties such as tensile strength and percent elongation at break were evaluated. Husk biomasses from such as corn, soybean, rice, and wheat were pulverized using air classifying mill (ACM) and four different types of packaging films with thickness of $50{\mu}m$ were prepared using the pulverized biomass and low density polyethylene/linear low density polyethylene. The packaging film with wheat husk biomass was found to have greater mechanical properties of elongation and tensile strength than the other samples. Biodegradability of bio film was measured to be 51.5% compared to cellulose.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.251-257
• /
• 2001

This experiment was conducted to investigate the effect of chitosan on the growth and yield of fall-planted potatoes. The research was carried out in fall-planted potatoes from August 2000 to Aprial 2001 at the height of 250m above sea level in Jeju Island. Soaking for 30 min. of seed potatoes in 200 times diluted solution of 3% liquid chitosan shortened days to emergence by 4 to 6 days. Stem length, number of stems and number of stolons per plant were 56.5 cm, 4.3, and 19.0, respectively, when seed potatoes were soaked for 30 min. in 200 times diluted solution of 3% liquid chitossan. Total potato yield in this treatment reached 2,963 kg per 10a and was significantly greater than in other treatments. Yield of marketable tubers (greater than 30g) per 10a for treatment of seed potatoes soaking in 200 times diluted solution of 3% liquid chitosan and for treatment of foliage spray with 200 times diluted solution of 3% liquid chitosan plus chitosna power (10 kg per 10a) miximg with soil was 2,761 kg and 2,628 kg, respectively. Contents of Mg, Fe and B were the greatest in the treatment of 30 min. soaking of seed potatoes in 200 times diluted solution of 3% liquid chitosanm. The increased contents of these elements are considered to have caused yield increase as a result of increased chlorophyll content for photosynthesis.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1324-1330
• /
• 2017

Salt, or sodium chloride (NaCl), is a critical ingredient in many foods. It has roles in the flavor profiles of food products, textures of foods and preservation of foods against microbes. However, it increases risks of hypertension and is closely related to the development of cardiovascular disease. In recent years, health concerns related to sodium intake caused an increased demand for salt-reduced products in worldwide; it became necessary to develop natural salt-alternative products that are globally competitive. In a recent study, researchers succeeded in obtaining a natural salt enhancer through the hydrolysis of vegetable- and animal-matter mixtures. This study used various methods to identify and quantify peptide-containing arginine as a salt-alternative peptide (SAP) in an optimum combination. Arginine, or dipeptide-containing arginine, was analyzed as a standard substance using an NMR spectroscopy. The NMR carbon signal of the guanidine group of the standard substance was verified in a similar location (the L-arginine (Arg) was 156.8 ppm, the Arg-Alanine was 156.4 ppm and the Arg-Serine was 156.4 ppm). The results suggested that it is possible to analyze peptide-containing arginine quantitatively through the hydrolysis of vegetable- and animal-matter mixtures.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.119-127
• /
• 1996

The effect of sodium hydroxide treatment on some physicochemical properties of zeolite mordenite mineral was studied with chemical analyses, powder X-ray diffraction, thermal analyses, infrared analysis, measurement of carbon dioxide adsorption and gas chromatography. Mordenite mineral from tuffaceous rocks in Yeongil and Wolsung area was used as a starting material and treated with 0.1-5N NaOH aqueous solution at about $95^{\circ}C$ in the water bath for three hours.At the concentration of sodium hydroxide below 0.5N, all chemical compositions in the tuff were virtually insoluble and the mordenite structure did not change. At the concentration above 1N, the chemical compositions such as silica, alumina, etc., were dissolved. The dissolution ratio of silica was lager than that of alumina, and the ratio of silica to alumina in the tuff decreased sharply in the concentration range of 2 to 3N. Intensity of X-ray diffraction peak of mordenite (202) plane and the adsorbed amount of carbon dioxide also decreased with the increasing concentration of sodium hydroxide above 1N. These decreases corresponded to the degree of mordenite structure collapsed.The separation of gas chromatography of nitrogen, oxygen and carbon monoxide was not affected by the sodium hydroxide treatment, but elution peaks of methane and krypton tended to be broadened and their retention time was shortened. The elution peaks of both methane and krypton tended to be overlapped with those of nitrogen and oxygen.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.723-729
• /
• 1993

Cu(II) ion-responsive chemically modifed electrodes (CMEs) were constructed by incorporating 1-(2-pyridylazo)-2-naphthol (PAN) into a conventional carbon-paste mixture of graphite powder and Nujol oil. Cu(II) ion was chemically deposited on the surface of the PAN-chemically modified electrode in the absence of an applied potential by immersion of the electrode in a buffer solution (pH 3.2) containing Cu(II) ion, and then reduced at a constant potential in 0.1 M KNO$_3$. And a well-defined voltammetric peak could be obtained by scanning the potential to the positive direction. The electrode surface could be regenerated with exposure to acid solution and reused for the determination of Cu(II) ion. In 5 deposition / measurement / regeneration cycles, the response could be reproduced with 6.1${\%}$ relative standard deviation. In case of using the differential pulse voltammetry, the calibration curve for Cu(II) was linear over the range of 2.0 ${times}$ 10$^{-7}$ ∼ 1.0 ${times}$ 10$^{-6}$ M. And the detection limit was 6.0 ${times}$ 10$^{-8}$ M. Studies of the effect of diverse ions showed that Co, Ni, Zn, Pb, Mg and Ag ions added 10 times more than Cu(II) ion did not influence on the determination of Cu(II) ion, except EDTA and oxalate ions.