• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.187.2-187.2
• /
• 2014

최근 다양한 카본 나노소재들이 열 전도성 필러로써 고분자 복합체의 열전도도 향상을 위해 연구되고 있다. 그러나 구조적 이방성을 갖는 탄소나노튜브(CNT) 혹은 그래핀나노플레이트(Graphene Nanoplatelet)를 복합체에 적용할 경우, 복합체의 수직 방향과 수평 방향에서의 열전도도가 3배 이상 차이가 나는 문제가 있다. 따라서 본 연구에서는 2차원의 GNP 표면 위에 1차원의 CNT를 직접 성장시킨 하이브리드 탄소소재를 이용하여 이러한 열전도도 이방성을 개선하고자 하였다. 하이브리드 탄소소재는 무전해 도금법과 열기상법으로 제조하였다. 합성된 하이브리드 탄소소재 및 CNT를 단독 혹은 혼합하여 필러를 만들고 이를 에폭시 기지 내에 분산시켜 복합체를 제작하였다. 필러 함량별, 필러 비율별로 제작된 복합체의 열전도도를 레이저 플래시 법으로 측정 비교하였다. 결과적으로 기존의 단일 필러들보다 열전도도 이방성이 1.5배 이상 개선된 방열용 에폭시 복합체를 제작할 수 있었다. 한편 하이브리드 탄소와 2% 이하의 CNT 배합에서 단독 필러 투입에 비해 45% 이상의 열전도율 향상을 확인하였다. 이는 미세구조 분석 및 성분 분석 결과, 필러 분산 정도가 열전도도 향상의 주요 인자로 작용하는 것을 확인하였고 기지 내 CNT가 열전도도 경로로 작용하기보다는 하이브리드 탄소소재의 균일한 분산에 영향을 준 것으로 사료된다.

• Composites Research
• /
• v.31 no.6
• /
• pp.412-420
• /
• 2018

In this work, phenolic resins containing conductive carbon fillers, such as, petroleum coke, carbon black, and graphite, were used to improve the surface heating elements by impregnating a pitch-based carbon paper. The influence of conductive carbon fillers on physicochemical properties of the carbon paper was investigated through electrical resistance measurement and thermal analysis. As a result, the surface resistance and interfacial contact resistivity of the carbon paper were decreased linearly by impregnating the carbon fillers with phenol resins. The increase of carbon filler contents led to the improvement of electrical and thermal conductivity of the carbon paper. Also, the heating characteristics of the surface heating element were examined through the applied voltage of 1~5 V. With the applied voltage, it was confirmed that the surface heating element exhibited a maximum heating characteristic of about $125.01^{\circ}C$(5 V). These results were attributed to the formation of electrical networks by filled micropore between the carbon fibers, which led to the improvement of electrical and thermal properties of the carbon paper.

• Composites Research
• /
• v.37 no.3
• /
• pp.197-203
• /
• 2024

Mechanical, electrical and thermal properties of polymer composites can be improved simultaneously by incorporating carbon fibers (CFs), which are beneficial for improving the mechanical properties, and multi-walled carbon nanotubes (MWCNTs), which are advantageous for improving the conductive properties. In this study, MWCNTs were incorporated into carbon long fiber thermoplastic (CLFT), which has excellent mass production processability and excellent mechanical properties, to control electrical and thermal properties. The mechanical and electrical properties of the prepared composites were most significantly influenced by the amount of filler incorporated. On the other hand, the thermal properties were improved due to the formation of a filler network interconnected by the incorporation of MWCNTs. By adjusting the filler amount, filler composition, and filler network structure of MWCNT-incorporated CLFT, the mechanical, electrical, and thermal properties could be controlled.

• Composites Research
• /
• v.34 no.5
• /
• pp.290-295
• /
• 2021

The application of lightweight structural composites to automobiles as a solution in line with global fuel economy regulations to curb global warming is recognized as a megatrend. This study was conducted to provide a technical approach that can respond to the issue of replacing parts that require conductive properties to maximize the application of thermoplastic carbon fiber reinforced plastics (CFRPs), which are advantageous in terms of repair, disposal and recycling. By utilizing the properties of the low-viscosity polymerizable oligomer matrix, it was possible to prepare a thermoplastic CFRP exhibiting excellent impregnation properties while uniformly mixing the conductive filler. Various carbon-based conductive fillers such as carbon black, carbon nanotubes, graphene nanoplatelets, graphite, and pitch-based carbon fibers were filled up to the maximum content, and electrical and thermal conductive properties of the fabricated composites were compared and studied. It was confirmed that the maximum incorporation of filler was the most important factor to control the conductive properties of the composites rather than the type or shape of the conductive carbon filler. Experimental results were observed in which it might be advantageous to apply a one-dimensional conductive carbon filler to improve electrical conductivity, whereas it might be advantageous to apply a two-dimensional conductive carbon filler to improve thermal conductivity. The results of this study can provide potential insight into the optimization of structural design for controlling the conductive properties of thermoplastic CFRPs.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.122-127
• /
• 2006

A series of conductive filler were prepared with electroless plating method. Base conductive materials of the filler were nickel and copper. The cores were prepared with Nylon 6 and rayon in different aspect ratio. Also, various complexes were made with ABS resin and conductive filler with different filler feed ratio. The conductivity of the filler was measured with conductivity analyzer and the size distributions of fillers was measured with laser particle size analyzer. Electromagnetic wave shielding efficiency of each complex film was measured with flange circular coaxial transmission line sample holder within the 1MHz$\sim$1GHz bandwidth range. From this study, the conductivity of filers surpass that of other carbon films. It is available that the filler made of fibrous materials can be applied in plastic molding industry of electric appliances as a EMI filler.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.643-647
• /
• 2001

퓨란수지로부터 유리질 탄소를 제조하였다. 유리질 탄소의 제조시, 사용된 수지가 경화 및 탄화 단계에서 많은 양의 가스를 방출하면서 큰 수축이 발생하여 크랙을 형성하고 휨 현상을 일으킨다. 이런 현상을 감소시키기 위하여 본 실험에서는 경화단계에서 압력을 가하고, 가열속도를 매우 느리게 하였다. 또한, 경화단계에서 무게감소와 수축율을 억제하고, 발생하는 가스의 배출을 용이하게 하여 궁극적으로는 시편의 크랙 및 휨 현상을 방지하고자 필러와 알콜을 첨가하였다. 그 결과, 무게감소와 수축을 억제하고 밀도의 증가를 가져왔고 유리질 탄소를 용이하게 제조할 수 있었으나 알코올을 첨가한 경우 필러의 양이 증가할수록 높은 비저항 값과 낮은 강도값을 나타내었다. 이런 현상은 알코올이 경화단계에서 분해 증발하면서 미세한 기포를 형성하고 이것들이 기공으로 전이하여 최종 제품에까지 영향을 주었기 때문이다.

• Journal of Adhesion and Interface
• /
• v.9 no.3
• /
• pp.7-13
• /
• 2008

The particulate type silicon carbide (SiC) and fiber type carbon fiber (CF) filler, of similar thermal conductivities, were mixed with polyetheretherketone (PEEK) to investigate the filler effects on the thermal diffusivity. The SiC and CF fillers had a good and uniform dispersion in PEEK matrix. Thermal diffusivities of PEEK composites were measured from ambient temperature up to $200^{\circ}C$ by laser flash method. The diffusivities were decreased as increasing temperature due to the phonon scattering between PEEK-filler and filler-filler interfaces. Thermal diffusivity of PEEK composites was increased with increasing filler content and the thermal conductivities of two-phase system were compared to the experimental results and it gave ideas on the filler dispersion, orientation, aspect ratio, and filler-filler interactions. Nielson equation gave a good prediction to the experimental results of PEEK/SiC. The easy network formation by CF was found to be substantially more effective than SiC and it gave a higher thermal diffusivities of PEEK/CF than PEEK/SiC.

• Composites Research
• /
• v.37 no.3
• /
• pp.186-189
• /
• 2024

This study compared and evaluated the mechanical properties of carbon fiber reinforced thermoplastic polymer (CFRTP) mixed with nanofillers. After mixing various nanofillers such as Multi-wall carbon nanotube (MWCNT), Silicon oxide, Core shell rubber, and Aramid nanofiber with Polyamide 6 (PA6) resin, this is used as a matrix to create a carbon fiber reinforced composite material (CFRP) was manufactured and its physical properties were measured. Depending on the type and mixing ratio of nanofiller, tensile strength, inter-laminar shear strength (ILSS), and Izod impact strength were measured. In terms of tensile strength and impact strength, the highest values were obtained when mixing core shell rubber, however the ILSS was optimal when mixing less than 1 wt.% of silicon oxide.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2023

Nanocomposites have been considered innovative composite materials that have multi-functionality and high performance. Because the incorporation of nanoscale fillers may significantly improve the electrical, mechanical, and thermal properties of composites, numerous extensive studies on the characterization of nanocomposites with nanoscale fillers have been performed. In particular, the development of nanocomposites using carbon-based nanoscale fillers (e.g., carbon nanotubes, carbon black, graphene nanoplates) have attracted much interest in the composite field. This paper provides a review of recent advances in the electrical/mechanical characteristics of nanocomposites, which are essential for their practical applications. Furthermore, this paper revisits the recent research on multi-scale modeling, which is a promising approach for predicting the characteristics of nanocomposites. The current challenges and future development potentials for multi-scale modeling are also discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.253.2-253.2
• /
• 2013

탄소나노튜브(CNT)는 나노미터의 직경과 마이크로미터의 길이를 갖는 기하학적 구조와 우수한 전계방출 특성으로 디지털 엑스선 소스와 같은 차세대 전자소스 소자에 활용되고 있다. 본 발표에서는 고밀착성의 CNT 에미터와 진공 브레이징 공정 개발을 기초로 설계, 제작된 CNT 기반 디지털 엑스선 튜브에 대해서 논의한다. 나노 필러를 함유한 페이스트를 제조하여 캐소드 기판에 대한 CNT 에미터의 밀착성을 향상시켰으며, 진공 브레이징을 고온에서 최적화함으로써 진공 밀봉된 엑스선 튜브내의 진공도를 안정적으로 확보하였다. 유방암 진단을 위한 디지털 단층합성 시스템용으로 50 mA 이상의 고전류 엑스선 튜브를 제작함과 아울러 근접 암치료 또는 강내형 엑스선 영상용으로 6 mm 이하의 직경을 갖는 초소형 엑스선 튜브를 제작하였다. 개발된 CNT 기반 엑스선 튜브는 우수한 안정성과 신뢰성을 보이며, 에너지와 강도를 쉽게 제어할 수 있는 디지털 특성도 잘 나타냈다.