• Particle and aerosol research
• /
• v.8 no.2
• /
• pp.69-74
• /
• 2012

This study describes how successfully a conventional flame aerosol synthesis was used to continuously synthesize Pt-Ru catalysts supported by carbon agglomerates. Nearly spherical catalysts produced in the flame were mainly composed of metallic Pt and Ru with the molar ratio of 1:1 and those sizes were controllable from ~1.5 nm to ~2.0 nm. Nevertheless, only Pt peaks were found from X-ray diffraction experiments, suggesting that amorphous-like Ru was well mixed in the crystalline Pt lattices. It was found from Cyclo-voltamograms and CO stripping experiments that the electrochemical properties of the catalysts are at least comparable to that of a conventional commercial sample.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1155-1156
• /
• 2015

This study demonstrates hybrid-type transparent electrodes for touch screen panels. The hybrid-type electrodes were fabricated by coating carbon nanotubes (CNTs) on metal meshes. For the formation of metal meshes, thin films of silver (Ag) were deposited on glass substrates using a sputtering method and then pattenrned via photolithography to obtain mesh structures of which line width was $10{\mu}m$ and line-to-line spacing was $300{\mu}m$. CNTs were coated on Ag meshes by using electrophoretic deposition (EPD). For the samples of Ag meshes with/without CNTs, their surface morphologies, visible-range transmittances, and reflectances were characterized and compared. The experimental results indicated that the reflectance of Ag mesh electrodes was substantially reduced by coating of CNTs. Especially, the hybrid electrodes of Ag meshes with EPD-coated CNTs showed excellent properties such as transmittance higher than 90%, reflectance lower than 8%.

• Journal of Powder Materials
• /
• v.14 no.1 s.60
• /
• pp.44-49
• /
• 2007

In the fabrication of dye-sensitized solar cells (DSSCs), carbon counter electrode has been tested for replacing the platinum counter electrode which has two drawbacks: limited surface area and high material cost. Poor mechanical stability of carbon layer due to weak bonding strength to electrically conductive TCO (transparent conducting oxide) glass substrate is a crucial barrier for practical application of carbon counter electrode. In the present study a carbon counter electrode with high conversion efficiency, comparable to Pt counter electrode, could be fabricated by adaption of a bonding layer between particulate carbon material and TCO substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.268-268
• /
• 2010

단일벽 탄소 나노튜브(SWCNT)는 그 뛰어난 전기적, 물리적 특성 때문에 반도체 공정에 있어서 중요한 p-type 채널 물질로 꼽히고 있다. 본 연구에서는 SWCNT를 성장하여 이를 이용한 전계효과 트랜지스터를 제작하고 또한, 부분적인 폴리머의 코팅으로 타입을 변화하는 연구를 보이고자 한다. Ferritin용액을 DI-water에 2000배 희석하여 SiO2 기판 위에 뿌린 뒤 Methanol을 이용하여 기판 표면에 촉매가 붙어있게 한다. 이 기판을 $900^{\circ}C$로 가열하여 유기물질을 제거한 뒤 화학 기상 증착(Chemical Vapor Deposition)방법으로 SWCNT를 성장하게 된다. 이렇게 성장된 SWCNT는 촉매의 농도에 비례하는 밀도를 가지게 되며 이 위에 전극을 증착하고 back-gate를 설치하여 FET를 제작한다. 메탈릭한 SWCNT는 breakdown 공정을 통하여 제거한 뒤, 전자 농도가 높은 NADH를 전체적으로 코팅을 한다. NADH는 기존의 다른 폴리머(polyethyleneimine: PEI)에 비교하여 코팅 후 전자 제공 효과가 크며 그 성질의 재현성이 높고 공기 중에서 안정성을 유지하는 능력이 있다. 이러한 NADH의 코팅으로 n-type으로의 SWCNT FET를 제작하였으며 type conversion 현상을 이용하면 국부적인 NADH의 코팅으로 homojunction-diode의 제작 등 다양한 소자의 제작에 적용될 것으로 예상한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.19-20
• /
• 2014

연료전지 스택을 구성하는 핵심 부품 중 하나인 분리판(Bipolar plate)은 반응 연료인 수소와 산소를 분리하여 셀(cell)의 전면적에 균일하게 분배, 공급, 배기 및 전기화학반응에 의해 생성된 전류를 수집하며, 높은 가스밀폐성, 전기전도성 및 내식성이 요구된다. 분리판 소재로는 흑연, 고분자-탄소 복합체 및 금속 등이 사용되고 있으며, 이중 연료전지 스택의 부피, 무게 및 제조비용 감소를 위하여 금속분리판이 주목받고 있다. 그러나 금속분리판의 경우 연료전지 작동환경에서 부식반응에 의한 이온 용출로 인해 전극촉매나 고분자전해질막의 오염을 유발할 수 있다는 단점이 있어 최근 금속계 분리판의 코팅을 통하여 분리판의 내식특성 및 전기적 특성을 향상시키는 연구가 활발히 진행되고 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1023-1028
• /
• 2003

The field emission characteristics are studied by simulation for carbon nanotube triode structures with a strip-shaped emitter and a gate hole aligned with it. Two structures, one with double-edge and the other with single edge are analyzed. They show good emission characteristics. Emissions of electrons are concentrated on the edges of emitter and the emitted current increases as the distance between emitter and gate decreases. For single-edged emitter, the emitted electrons form a narow strip-shaped beam which has a good directionality. These triode structures have advantages in that they can be easily fabricated and aligned for assembly.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1358-1360
• /
• 1997

In this paper, the performance of Pt/$WO_3$ and Pt-$WO_3$ electrodes was studied for the direct methanol fuel cell. The characteristics of Pt/$WO_3$ electrode which was prepared by using electrodeposition method was tested with half-cell experiment. The characteristics of Pt-$WO_3$/C electrode which was Prepared by using freeze-drying method was tested with a single cell experiment. The performance of DMFC single cell which was prepared by Pt-$WO_3/C$ and Pt/C showed a current density of $32mA/cm^2$ at $110^{\circ}C$ & 0.3V(0.5mg Pt/$cm^2$).

• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.115-122
• /
• 2004

A glassy carbon electrode(GCE) modified with nafion-DTPA (diethylene triamine-pentaacetic acid)-glycerol is used for the highly selective and sensitive determination of a trace amount of Cu(II). Various experimental parameters, which influenced the response of nafion-DTPA-glycerol modified electrode to Cu(II), are optimized. The Copper(II) is accumulated on the electrode surface by the formation of the complex in an open circuit, and the resulting surface is characterized by medium exchange, electrochemical reduction, and differential pulse voltammetry(DPV). The electrochemical response is evaluated with respect to concentration of modifier, pH and preconcentration time, quiet time, copper(II) concentration, and other variables. A linear range is obtained in the concentration range 1.0${\times}$10$^{-8}$ M-1.0${\times}$10$^{-6}$ MCu(II) with 7 min preconcentration time. The detection limit(3s) is as low as 2.36${\times}$10$^{-8}$ M (1.50 ppb).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.396-400
• /
• 2005

Carbon nanotubes (CNTs) have been well known as electron emitters for field emission applications like FEDs. In this work, we propose as new application a vacuum sensor using CNTs and discuss its current-voltage characteristics as a function of vacuum pressure. The proposed sensor, based on electrical discharge theories in air gap well-known as Townsend theory and as Paschen's law, works by figuring out the variation of the dark current and the initial breakdown voltage depending on the vacuum pressure of air which can ionize through collisions with the electrons accelerated by high electric field.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.405-410
• /
• 2006

We fabricated gas sensors using carbon nanotubes (CNTs) as electron emitters for the purpose of detecting inert gases. By using the silicon-glass anodic bonding and glass patterning technologies with the typical Si process, we improved the compactness of the sensors and the reliability in process. The proposed sensor, based on, an electrical discharge theory known as Paschen's law in principle, works by figuring the variation of the discharge current depending on gas concentration. In the experiment, the initial breakdown characteristics were measured for air and Ar as a function of gas pressure. As the result, even though it should be realized that there are many other factors which have an effect on the breakdown of a gap, the sensors led to similar result as predicted by Paschen's law, and they showed a possibility as gas sensors which enable to detect the gas density ranged to the vacuum pressure from 1 to $10^{-3}$ Torr.