• 제목/요약/키워드: 탄소분말

검색결과 291건 처리시간 0.027초

연소합성법을 이용한 $Al_2O_3$-SiC-C 계 내화분말 합성의 최적조건 결정 (Synthesis of $Al_2O_3$-SiC-C refractory powders by Self-propagating High Temperature Synthesis)

  • 강충일;윤존도
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.205-205
    • /
    • 2003
  • 우리나라에서는 많은 양의 폐분진이 발생하며 경남지역에서는 연간 3만톤의 폐분진이 발생한다. 매년 폐기물의 발생량은 증가하고 있으며 폐분진류의 주성분은 실리카와 알루미나가 주성분을 이룬다. 특히 주조, 제강 등 금속공업에서 발생하는 분진은 입자가 미세한 다량의 실리카와 알루미나로 이루어져 있어 탄화규소(SiC) 및 알루미나-탄화규소-탄소(A1$_2$O$_3$-SiC-C)계 내화물 제조에 분쇄공정 없이 세라믹스의 원료로 활용할 수 있다. 현재 알루미나-탄화규소-탄소(Al$_2$O$_3$-SiC-C)계 내화물 제조를 위해 제조공정이 간단한 연소합성법을 이용하지만 분말제조 공정 중 분위기 조절에 많은 비용이 요구되고 있어 시급한 대안이 필요한 상태이다.

  • PDF

열적 탄소 환원법으로 제조된 ZnO 나노와이어의 성장 메커니즘 (Growth methanism of ZnO nanowire syntheized by carbo-thermal reduction method)

  • 손광석;김현정;박병호;김동규;조형균;김인수
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.173-173
    • /
    • 2003
  • Nanowire와 nanorod 같은 1차원의 반도체 재료는 디멘젼과 크기와 물리적 특성과의 관계 등을 연구하는데 중요한 역할을 하며 laser ablation, arc discharge, chemical vapor depostion, vapor phase transport Process와 solution등의 방법으로 성공적으로 합성되었다. ZnO 는 3.37eV의 넓은 밴드갭과 다른 넓은 밴드갭 재료에 비해 높은 exciton bindng energy (60meV)를 가지며 UV LED, laser diode에 적용하기 유리하고 최근 디스플레나 나노 광전소자로서의 가능성 이 대두되면서 최근 이에 관한 연구가 증가하고 있다. 본 연구에서는 열적탄소환원법(carbothermal reduction process)으로 ZnO와 graphite 분말을 1:1 중량비로 혼합한 분말을 90$0^{\circ}C$, 100$0^{\circ}C$에서 air 분위기에서 20분간 반응 후 로 내에서 냉각 하였다. 직경 이 50nm-1000nm, 길이가 수 미크론인 내부 결함이 전혀 없는 육각형 단결정의 nanowire가 합성되었고 XRD, FE-SEM과 TEM으로 조성 및 형상, 내부구조를 분석하였다. 합성된 ZnO nanowire는 직경 이 변하는 부분에서 성장방향으로의 계단을 형성하였고 이는 layer by layer 방법으로 nanowire가 성장한다는 것을 나타낸다.

  • PDF

결합재 종류에 따른 분말활성탄소를 혼입한 경화체의 밀도 및 흡수율 특성 (Density and Water Absorption Properties of Matrix Mixing with Powdered Active Carbon according to Binder Type)

  • 편수정;김원종;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.111-112
    • /
    • 2017
  • Radon has been considered the greatest source of exposure within the total radiation exposure of the human body. xposure from radon, which exists in indoor air quality, lacks public perception, Radon, which exists anywhere on earth, is not regarded as a state of attention even if it is above the average level. Indoor radon exposure situations are not intentionally introduced, and essentially the attention and responsibilities of radon exposures are assumed to be in indoor occupants. So, these are caused by common uranium and thorium scattering on Earth, and are brought into the building by fine cracks or exposed indicators of the buildings. Therefore, this study aims to reduce the risk of radon rays and reduce radon, which induces diseases caused by breathing in the body of indoor air pollutants and emitting diseases by emitting alpha rays from the radon gas.

  • PDF

금속분말-난연제 함유 ABS의 난연 특성 평가 (Assessment of Flame Retardancy for Acrylonitrile Butadiene Styrene Containing Metal Powder and Flame Retardant)

  • 송영호;정국삼
    • 한국화재소방학회논문지
    • /
    • 제21권2호
    • /
    • pp.30-35
    • /
    • 2007
  • 고분자 물질의 화재 위험성 및 화재시 인명 피해의 감소를 위한 기초자료로 제시하고자 난연제 및 금속분말의 첨가에 의한 난연성 평가를 수행하였다. 본 연구를 위하여 중량감소율,한계산소지수 및 탄화층 생성량 측정, 연기 중량 농도 및 일산화탄소 발생량 측정의 실험을 수행하였다. 금속분말과 난연제를 함유한 acrylonitrile butadiene styrene은 낮은 중량감소율을 나타내었고, 한계산소지수 및 탄화충 생성량은 증가하였으며, 연기 중량 농도 및 일산화탄소의 발생량도 감소하는 결과를 나타내었다. 또한 가장 효과적인 복합체는 tricresyl phosphate-Mo 복합체로 나타났다.

저가형 탄소섬유 개발을 위한 자외선 조사 기반 의류용 PAN 섬유의 연속식 안정화 공정 개발 (Developing Continuous Stabilization Process for Textile-Grade PAN Fiber-Based Carbon Fiber Using UV Irradiation)

  • 문준하;성홍규;유지선;조세연;최재원
    • 한국분말재료학회지
    • /
    • 제29권5호
    • /
    • pp.418-423
    • /
    • 2022
  • Carbon fibers (CFs) are considered promising composite materials for various applications. However, the high cost of CFs (as much as $26 per kg) limits their practical use in the automobile and energy industries. In this study, we developed a continuous stabilization process for manufacturing low-cost CFs. We employed a textile-grade polyacrylonitrile (PAN) fiber as a low-cost precursor and UV irradiation technique to shorten the thermal stabilization time. We confirmed that UV irradiation on the textile-grade PAN fibers could lower the initial thermal stabilization temperature and also lead to a higher reaction. These resulted in a shorter overall stabilization time and enhancement of the tensile properties of textile-grade PAN-based CFs. Our study found that only 70 min of stabilization time with UV irradiation was required to prepare textile-grade PAN-based low-cost CFs with a tensile strength of 2.37 ± 0.22 GPa and tensile modulus of 249 ± 5 GPa.