• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.129-137
• /
• 2013

From the cooked-rice as a raw material, activated carbons throughout a hydrothermal synthesis and vacuum soak of KOH for chemical activation were obtained. Activated carbon electrodes for electric double layer supercapacitors were prepared and electrochemical characteristics were examined. Including the specific surface area by BET method and pore size distribution by NLDFT method, physical properties of activated carbons were investigated by means of SEM, EDS, XRD, and TG analyses. Cycle voltammetry and AC-impedance measurements were conducted to confirm the electrochemical characteristics for the electrodes. From hydrothermal synthesis, $5{\sim}7{\mu}m$ diameters of spherical carbons were obtained. After the activation at $800^{\circ}C$, it was notable for the activated carbon to be the specific surface $1631.8cm^2/g$, pore size distribution in 0.9~2.1 nm, and micro-pore volume $0.6154cm^3/g$. As electrochemical characteristics of the activated carbon electrode in 6M KOH electrolyte, it was confirmed that the specific capacitances of 236, 194, and 137 F/g at the scan rate of 5, 100, and 500 mV/s respectively were exhibited and 91.2% of initial capacitance after 100,000 cycles at 200 mV/s was maintained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.824-827
• /
• 2011

Needs for Smart Grid development are increasing all over the world as a solution to its problem according to depletion of energy resources, climatic and environmental rapidly change and growing demand for electrical power. Especially decentralized power is attracting world's attention. In this mood a new era for a unit scale of decentralized power environment is on its way in building. However there is a problem to have to be solved in the uniformity of power quality because the amount of power generated from renewable energy resources such as wind power and solar light is very sensitive to climate fluctuation. And thus this paper tries to suggest an energy management algorithm on basis of real time monitoring for meteorological data. The proposed EMS model embodies the method for predicting the power generation by monitoring and analyzing the climatic data and controling the efficient power distribution between the renewable energy and the existing power. The ultimate goal of this paper is to provide the technological basis for achieving zero-energy house.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.979-984
• /
• 2011

Although sludge production has been increased due to the number of the wastewater treatment plants expanded, needs of the techniques for the sludge reduction and disposal has been issued importantly because the sludge dumping to ocean is prohibited from 2012 by the London Dumping Convention. Therefore, the sludge solubilization using electrolysis as an alternative techniques for the sludge disposal was carried out in this study. Iridium coated titanium based insoluble electrodes were used and 20 volt was applied to the electrolysis reactor using DC power supply. Supernatants of the treated sludge was monitored: The soluble COD, TN, TP of it was increased to 151%, 22% and 6% respectively. And the sludge floc size distribution was changed, that is, the flocs ranged from 0.1 to 1.0 ${\mu}m$ were increased. All of these results indicate that the cells were lysed and the internal matters bursted out of the cell after electrolysis. As well as the reduction of the sludge production, the soluble organic matters from the cells could be used as an external carbon sources in the advanced wastewater treatment plants.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2014

This paper presents the implementation of a control system of pellet boiler using wood pellet as carbon neutral material. The system also has the additional features to provide remote controlling and monitoring based on home networking technology through either public switched telephone networks or mobile communication networks. It consists of three kinds of sub-modules; a main controller provides basic and additional features such as a setting of temperature, a supplying of wood pellet, a controlling of ignition and fire-power, and a removing of soot. The second is temperature controller of individual rooms which is connected to the main controller through RS-485 links. And interface modules with PSTN and mobile networks can support remote controlling and monitoring the functions. The test results under the heating area of $172m^2$ show a thermal efficiency of 93.6%, a heating power of 20,640kcal/hr, and a fuel consumption of 5.54kg/hr. These results are superior to those of the conventional pellet boilers. In order to obtain the such high performance, we newly applied a 3-step ignition flow, a flame detection by $C_dS$ sensor, and a fire-power control by fine controlling of shutter to our pellet boiler.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1141-1147
• /
• 2006

In order to applicate a newly method for powdered activated carbon(PAC) selection based on economic efficiency, PAC adsorption tests were performed for removal of MIB and dissolved organic carbon(DOC) in drinking water supplies. The removal rate of MIB increased when the PAC dose increased. The Coal-based PACs were superior for adsorption of MIB compared to wood-based PACs. PAC adsorption of DOC and $UV_{254}$ were a little different for different PACs and types of raw water, but both were lower than adsorption of MIB. Among the tested PACs, the one called P-1000 was most effective for removal of MIB, DOC and $UV_{254}$. Most of the organics in the tested samples were proven by excitation emission matrix(EEM) results to be fulvic-like materials. Especially, fulvic-like materials, humic-like materials, and soluble microbial byproduct(SMP)-like materials decreased after contact with PAC. P-1000 which had the lowest MIB cost index(MCI) was selected as the optimum PAC for the target water. PAC efficiency and treatability, particle size and distribution, and the cost associated with PAC dosing for MIB removal according to DOC concentration should all be considered before making the final selection of the best PAC for the target water.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.8
• /
• pp.754-760
• /
• 2010

Geosmin removal by biodegradation was investigated in lab-scale slow sand filtration column with different empty bed contact times (EBCTs) and water temperature. Schmutzdecke layer was built up after 30 days operation and biomass and activity were $4.5{\times}10^6\;CFU/g$ and $3.42\;mg{\cdot}C/m^3{\cdot}hr$, respectively. The attached bio-film microorganisms in schmutzdecke layer were isolated and identified. The dominant species was Pseudomonas sp. that had occupied 56%. Removal efficiencies of dissolved organic carbon (DOC) and geosmin were 27% and 95% after 30 days operation. In lab-scale slow sand filtration column, geosmin and DOC removal efficiencies were 62% and 10% at $5^{\circ}C$, respectively. And increasing water temperature ($15^{\circ}C$ and $25^{\circ}C$) increased the geosmin and DOC removal efficiencies (88~100% and 25~42%) in lab-scale slow sand filtration column. Geosmin and DOC biodegradation rates (k) in the schmutzdecke layer (in the upper 5 cm filter bed) were $1.842{\sim}15.965\;hr^{-1}$1 and $0.253{\sim}1.123\;hr^{-1}$, respectively. It were about 18~32 times and 20~51 times of the rates in the deeper filter bed (5~60 cm).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.521-530
• /
• 2018

This paper proposes "The Agriculture Decision-making System(ADS) based on Deep Learning for improving crop productivity" that collects weather information based on location supporting precision agriculture, predicts current crop condition by using the collected information and real time crop data, and notifies a farmer of the result. The system works as follows. The ICM(Information Collection Module) collects weather information based on location supporting precision agriculture. The DRCM(Deep learning based Risk Calculation Module) predicts whether the C, H, N and moisture content of soil are appropriate to grow specific crops according to current weather. The RNM(Risk Notification Module) notifies a farmer of the prediction result based on the DRCM. The proposed system improves the stability because it reduces the accuracy reduction rate as the amount of data increases and is apply the unsupervised learning to the analysis stage compared to the existing system. As a result, the simulation result shows that the ADS improved the success rate of data analysis by about 6%. And the ADS predicts the current crop growth condition accurately, prevents in advance the crop diseases in various environments, and provides the optimized condition for growing crops.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.495-500
• /
• 2010

In this study, $Al_2O_3$ and $TiO_2$ films was deposited on to PES (poly(ethersulfon) substrate by using atomic layer deposition as functions of deposition temperature and plasma power. The density and carbon contents of $Al_2O_3$ and $TiO_2$ films was changed by varying process conditions. High density thin films was achieved through optimizing the process conditions. Buffer layer was deposited prior to the processing of upper thin films to avoid PES surface destruction during the high power plasma process and to enhances the tortuous path for water vapor permeation for the defect decoupling effect. The water vapor transmission rate by using MOCON test was investigated to analyze the effect. Water vaper permeation properties was improved by using the inorganic multi-layer passivation layer and activation energy of the water vapor permeation was increased.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.111-122
• /
• 1996

S. chibaensis J-59 produced an extracellular xylanase in a CSL medium composed of 1.5% com steep liquor, 0.1% $MgSO_4{\cdot}7H_2O$, 0.012% $CoCl_2{\cdot}6H_2O$, and 0.15% glucose containing xylan. but it did not produce in the culture medium containing xylose. The production of enzyme reached to a maximum level (0.83 uints/ml) when bacteria were cultured in 2.5 l jar fermentor for 48hrs at $30^{\circ}C$ and pH 7.0. Furthermore, S. chibaensis J-59 produced an intracellular glucose isomerase in a medium containing xylan and/or xylose. Xylanase was purified 29-fold over the culture supernatants of S. chibaensis J-59 by ammonium sulfate fractionation, chromatography on DEAE-Sephadex A-50, and gel filtration on Sephadex G-200. The purified enzyme is a monomeric enzyme with a native molecular mass of 25 kDa and a subunit molecular mass of 25 kDa. The purified enzyme requires $Mg^{2+}$ for activity, $Ca^{2+}$, $Co^{2+}$ is not an inhibitor but inhibit by $Fe^{3+}$, $Hg^{2+}$, and $Cu^{2+}$, sodium dodecyl sulfate, N-bromosuccinide. Pattern of hydrolysis demonstrated that the xylanase was an endo-splitting enzyme able to break down birchwood xylan at random giving xylobiose, xylotriose and xylotetrose as the main end products.

• Journal of agriculture & life science
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2009

This study was conducted to examine the biomass, allometric equations, net primary production, above and total biomass expansion factors and stem density values for 27 years old Korean pine(Pinus koraiensis Siebold et Zuccarini) plantation at the Gangneung National Forest. After considering of the diameter distributions in the $20m{\times}20m$ plot measurement, a total of 5 representative sample trees were destructively sampled to measure green weights and dry weights of the four(root, stem, branch and foliage) protions of Korean pine trees. According to the results of this study, total dry weights were 117.6 kg/tree and 59.9 ton/ha. Aboveground biomass and total (above and belowground) biomass for this species were 59.9 and 82.4 ton/ha, respectively. Ratios of root to aboveground biomass were 0.38. Net primary production of aboveground biomass and belowground biomass were 9.4 and 11.3 ton/ha, respectively. Stem density was $0.49g/cm^{3}$. Above and total biomass expansion factors were 1.78 and 2.19, repectively. This information could be very useful to calculate carbon sequestrations by applying stem desity values and biomass expansion factors for Korean pine species.