• Journal of Convergence for Information Technology
• /
• v.8 no.4
• /
• pp.81-86
• /
• 2018

The purpose of this study is to compare the difference between quadriceps strength and endurance on the degree of elasticity of convergent kinesio taping. Twenty-eight normal adults who voluntarily participated in this study were randomly assigned among 4 groups, that is, group without tape, group with tape elasticity of 0 %, group with tape elasticity of 25 %, or group with tape elasticity of 50 %. Quadriceps strength and endurance were measured using CSMI. Strength among the groups was significantly different (p<.001), and the greater the elasticity of the tape, the greater the muscle strength. However, endurance was't significantly different among the groups (p>.05). These findings suggest that convergent kinesio taping elasticity with 25% and 50% is effective for quadriceps strength in physical activity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.41-51
• /
• 2007

Differential equations and their solutions were formulated to describe the deflection of the tapered, nonuniform thickness and width's temple, clamped at one end while the perpendicular force is acting on the other end which is freely suspended. The model was derived based on laws of continuity at every point inside the elastic medium that the deflection, tangent slope, bending moment, shearing force must be continuous within the medium. The model is found to be in good agreement with measurements on the beta titanium temple with the correlation 0.992 and p=0.999(Chi test). Therefore it is possible to predict the effect of various temple parameters such as elastic modulus, thickness, width on the deflection of the temples being considered.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.204-205
• /
• 2004

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.541-550
• /
• 2012

The purpose of this study was to investigate the effect of aerobic exercise training and half bath on blood component, cardiorespiratory function, and vascular compliance of middle-aged obese men. The subjects were 3 groups; aerobic exercise(n=10), half bath(n=10), and controlled group(n=10). They were tested on their blood component, cardiorespiratory function, and vascular compliance at the beginning and at the end of the 12-week study(pre-post test). For data analysis, mean and standard deviation scores were calculated, and repeated measure two-way ANOVA and Scheffe were used. The results of this study are as follows. First, aerobic exercise group was significantly improved on all blood component after the 12-weeks, and showed significant difference among groups. Half bath group was better than control groups on Triglyceride, LDL-C, and HDL-C levels. Second, aerobic exercise group was significantly improved on maximum oxygen uptake, maximum heart rate, and maximum ventilation after the 12-weeks. Third, in vascular compliance measured in both hands and both feet, the half bath group and aerobic exercise training group were significantly increases the control group. Therefore, these results imply that aerobic exercise and half bath can be helpful for better blood component, cardiorespiratory function, and vascular compliance in middle-aged obese men.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.197-198
• /
• 2008

본 논문은 Impedance plethysmography를 이용하여 당뇨병 및 동맥경화의 비침습적이고 고통없는 조기 진단을 위한 시스템 구성의 초기 단계로, 하지 동맥의 기계적 특징인 혈량 변화를 비침습적으로 측정하였다. 혈량과 혈압의 변화는 각각 Impedance plethysmograph와 mercury spbygmomanometer를 이용하여 측정되는데 탄성도는 혈량 변화값을 맥압(수축기압)의 변화량으로 나누어 계산한다. 이 논문에서는 하지 동맥의 탄성도를 비침습적으로 측정하기 위한 전초 단계로서 하지 동맥에서의 임피던스 변화만을 측정하였다. 회로는 50kHz Wien bridge 발진 회로, demodulation, 50kHz band past filter, 0.1Hz high pass filter, 20Hz low pass filter와 증폭기로 구성하였고, 생체 신호 획득 및 처리 과정을 거쳐 임피던스 변화량을 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.189-190
• /
• 2005

본 논문에서는 카메라폰용 광학줌(Optical zooming)과 자동초점조절장치(Auto Focusing,AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의 제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2 1(Magsoft co.)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 제작된 초음파모터는 한쪽 면이 없는 사작형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다 또한 압전세라익의 조성은 0.9Pb$(Zr_{0.51}Ti_{0.49})O_3$ - 0.1Pb$(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$ 의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 6*2*0.35mm$^3$(길이*폭*두께)로 제작하였다. 또한 탄성체의 외형치수는 8*4*2mm$^3$로 제작하였으며 회전축의 지름은 2mm로 제작하였다. 인가전압과 공진주파수가 각각 20Vpp, 64kHz일 때 소비전력은 0.3[W]이며 회전속도는 500rpm 으로 측정되었다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1853-1855
• /
• 2005

본 논문에서는 카메라폰용 광학줌(Optical zooming)과 자동초점조절장치(Auto Focusing, AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의 제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2.1(Magsoft)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 세자된 초음파모터는 한쪽 면이 없는 사자형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다. 또한 압전세라믹의 조성은 $0.9Pb(Zr_{0.51}Ti_{0.49})O_3$-$0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 $6*2*0.35mm^3$ (길이*폭*두께)로 제작하였다. 또한 탄성체의 외형치수는 $10*10*2mm^3$ 제작하였으며 두께를 각각 0.3[mm], 0.5[mm], 0.8[mm]으로 변화시키며 제작하였다. 두께가 0.8[mm]인 경우 공진주파수 60.5[kHz]를 나타내었으며 초음파모터의 압전세라믹에 인가전압이 증가함에 따라 회전속도와 모터에 흐르는 전류는 증가하였다. 인가전압이 40[Vpp], 공진주파수는 60.5[kHz]일때 무게추를 달고 그때의 토크 및 효율을 측정하였다. 회전 속도는 토크가 증가함에 따라 거의 선형적으로 감소하였으며 효율은 토크에 따라 증가하다가 토크가 약 20(mNmm)일 때 약 28[%]로 최대치를 나타내었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1271-1276
• /
• 2013

This study selected 22 male subjects to examine the maintenance period of static and ballistic stretching applied to rectus femoris, divided them into 11 static stretching group and 11 ballistic stretching group and analyzed changes in median frequency and in maximal voluntary isometric contraction before stretching and at 30 sec, 1 min, 3 min, 5 min, and 10 min after stretching. Median frequency showed significant differences in changes according to time and groups after the test of main effects. It was reduced after 3 min. in both static stretching and ballistic stretching groups and then increased again. Maximal voluntary isometric contraction showed significant differences in changes according to time and groups from the results of the main effect test. Static stretching group was reduced at 3 min after the experiment and then increased after that and ballistic stretching group was reduced at 5 min after the experiment and then increased again. In conclusion, changes were shown according to time after stretching and the effects of ballistic stretching were maintained a little longer than those of static stretching.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.197-206
• /
• 2006

Vibration of string is transmitted to the front plate through bridge to cause resonance of the instrument body in viol family string instruments. Therefore. the properties. geometrical shape. and positioning of the bridge are expected to have some effect on the sound color. In this study the strain and the stress in the bridge. and the force exerted on the top plate by the bridge as the string vibrates the bridge in cello are calculated through simulation based on the theory of elasticity. The modes of vibration and the characteristic frequencies are also found. Furthermore. the effect of geometric shape of bridge on sound color is studied in terms of frequency response. The results of this study show that the vibration characteristics of bridge is quite complex and the properties and the geometrical shape of bridge have significant effect on sound color, and therefore. the sound color of a cello can be controlled by changing the geometrical shape of bridge.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.330-331
• /
• 2005

본 논문에서는 카메라폰용 광학중(Optical zooming) 과 자동초점조절장치 (Auto Focusing, AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2.1 (Magsoft co.)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 제작된 초음파모터는 한쪽 면이 없는 사작형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다. 또한 압전세라믹의 조성은 $0.9Pb(Zr_{0.51}Ti_{0.49})O_3-0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 6*2*0.35$mm^3$(길이*폭*두께)로 제작하였다 또한 탄성체의 외형치수는 10*10*2$mm^3$로 제작하였으며 두께를 각각 0.3[mm], 0.5[mm], 0.8[mm]으로 변화시키며 제작하였다. 두께가 0.8[mm]인경우 공진주파수는 60.5[kHz]를 나타내었으며 초음파모터의 압전세라믹에 인가전압이 증가함에 따라 회전속도와 모터에 흐르는 전류는 증가하였다. 인가전압이 40[Vpp] 일 때 회전속도는 206[rpm] 이며 소비전력은 0.3[W]로 제작된 시편은 카메라폰용 광학중 및 자동초점조절장치시스템 분야에 응용이 가능하다.