• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.283-284
• /
• 2018

The rear side surface of tiles act have protrusions that helps secure the adhesion between the tile and the mortar for tile setting. Conventional height of the rear side usually ranges between 1 to 1.5 mm, and the molding method is classified in between press type and compression type during the manufacturing process, with most tiles being produced by the former method. In sites where adhesion failures were observed, tiles were taken to examine the cause of defect. It was determined that height was irregular at the rear side surface. Based on these findings, an experiment was conducted to determine the correlation between the rear surface and the bonding strength of tiles.

• Journal of Korea Game Society
• /
• v.8 no.1
• /
• pp.71-77
• /
• 2008

The geometric structure constructs terrain from height map and non-periodically tiling with Wang tile for the detail description. It will be able to express detail bump using parallax mapping to add decal data together with height data in tile. We solve the problem when the real-time rendering and propose improving of parallax mapping for the terrain.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.230-232
• /
• 2019

최근 360 미디어 콘텐츠의 수요가 높아지면서 360 영상을 효율적으로 전송하기 위한 다양한 압축 및 전송 기법들이 연구되고 있다. 360 영상의 스트리밍 기법 중 하나인 타일 기반 적응적 스트리밍 기법은 360 비디오를 타일 그리드로 나누어 부호화 하고, 뷰포트(Viewport)에 해당하는 타일만 스트리밍 할 수 있도록 한다. 기존의 타일 기반 스트리밍 기법은 뷰포트가 전환될 때 서버에 새로운 인트라 프레임을 요구하고, 지연 시간을 줄이기 위해 빈번한 RAP(Random Access Point)가 요구된다는 단점이 있다. 본 논문은 기존의 타일 기반 스트리밍 방법에서 인트라 프레임의 공유를 통해 비트율의 효율을 높이는 IFS(Intra Frame Sharing) 알고리즘을 제안한다. 제안된 IFS 방법은 낮은 화질의 인트라 프레임을 높은 화질의 인트라 프레임 부호화 시 공유하여, 뷰포트 스위칭 시점에서 다른 화질 간의 뷰포트 전환 작업이 필요 없어 비트율의 증가를 최소화한다. 실험에서, IFS 방법은 기존의 MCTS 기반의 적응적 스트리밍 방식과 비교했을 때 BD-rate(%)가 약 13% 절감되었다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.310-310
• /
• 2022

백리향은 꿀풀과에 속하는 다년생 식물로 세계적으로 약 100여 종이 자생하는 것으로 알려져 있다. 우리나라에서 자생하는 백리향은 외국 허브인 타임(Thymus vulgaris)과는 형태학적 및 유전학적으로 다르나 시중에서 백리향과 타임 구분 없이 유통되고 있다. 백리향은 가지가 많고 포복성으로 자라는 특성이 있어 지피용 식물로 유용하고 독특한 향기를 지니고 있어 식품 및 향장품용 향료자원으로 활용이 가능하다. 또한, 우울증이나 불면증 등과 같은 신경성 질환 예방에 효과적인 것으로 알려져 있다. 본 연구에서는 국내 자생 향료 식물의 발굴 및 산업화 소재 가능성 검토를 위하여 토종 허브인 백리향을 오대산에서 수집하여 증식한 후 외래종 타임과 특성을 비교하였다. 백리향과 골든레몬타임의 유전형태 조사는 국립수목원 백리향 조사 요령을 참고하여 각 20개체씩 조사하였다. 조사항목은 식물의 높이, 엽신의 형태와 길이 및 너비, 화서 길이와 마디당 꽃 수, 꽃의 길이 등이었다. 오대산 백리향의 식물 높이는 평균 14.3 cm, 엽신 형태는 난형, 엽신 길이는 1.24 cm이었고 꽃의 길이는 0.92 cm, 꽃 수는 35개이었다. 골든레몬타임의 식물 높이는 평균 18.03 cm, 엽신 형태는 타원형, 엽신 길이는 1.06 cm이었고 꽃의 길이는 0.59 cm, 꽃 수는 146개이었다. 백리향과 골든레몬타임의 정유 추출수율은 각각 0.22, 0.08%이었으며 추출된 정유를 GC-TOF의 SPME장치를 사용하여 분석한 결과, thymol, Caryophyllene, linalool, camphor 등이 향기 성분으로 검출되었다.

• Clean Technology
• /
• v.25 no.2
• /
• pp.147-152
• /
• 2019

Electrostatic precipitator that shows a good performance for the removal of particulate matter is important for controlling emissions from industrial facilities and power plants. The efficiency of the electrostatic precipitator on the removal of particulate matter is highly affected by the flow pattern inside the electrostatic precipitator. A number of studies have been conducted to obtain uniform flow distribution inside electrostatic precipitators. An electrostatic precipitator (ESP) with a length of 3.5 m and a height of 0.875 m was designed and installed in this study. The ESP included an inlet duct, diffuser, body, and contractor. Three perforated plates were installed in the diffuser of the ESP. Five pitot tubes were installed vertically and used to measure flow distribution in the cross section of the ESP body. Root mean square deviation value (RMS%) was used to examine the flow distribution inside the ESP when the perforated plates were installed in the diffuser. Flow distribution was also investigated in relation to the porosity of the perforated plate. The results showed that the perforated plates improved greatly the flow distribution inside the electrostatic precipitator. In addition, the most uniform flow distribution was found with 40%, 50%, and 50% porous perforated plates located from the inlet of the diffuser.

• The KIPS Transactions:PartB
• /
• v.19B no.1
• /
• pp.1-8
• /
• 2012

Mosaic is to make a big image by gathering lots of small materials having various colors. With advance of digital imaging techniques, photomosaic techniques using photos are widely used. In this paper, we presents an automatic photomosaic algorithm based on adaptive tiling and block matching. The proposed algorithm is composed of two processes: photo database generation and photomosaic generation. Photo database is a set of photos (or tiles) used for mosaic, where a tile is divided into $4{\times}4$ regions and the average RGB value of each region is the feature of the tile. Photomosaic generation is composed of 4 steps: feature extraction, adaptive tiling, block matching, and intensity adjustment. In feature extraction, the feature of each block is calculated after the image is splitted into the preset size of blocks. In adaptive tiling, the blocks having similar similarities are merged. Then, the blocks are compared with tiles in photo database by comparing euclidean distance as a similarity measure in block matching. Finally, in intensity adjustment, the intensity of the matched tile is replaced as that of the block to increase the similarity between the tile and the block. Also, a tile redundancy minimization scheme of adjacent blocks is applied to enhance the quality of mosaic photos. In comparison with Andrea mosaic software, the proposed algorithm outperforms in quantitative and qualitative analysis.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.4
• /
• pp.349-354
• /
• 2017

In this study, we proposed a design guideline of height-adjustable wash basin which is an assistive product for personal hygiene for persons with disability. We performed biomechanical assessments using both of conventional and prototype height adjustable wash basin. Total five elderly subjects (all male, age $68.6{\pm}4.3yrs.$, height $169.8{\pm}5.7cm$, weight $70{\pm}7.7kg$) participated for the assessment test. Each joint angles were measured by using a 3D motion capture system when subjects use wash basins, and the lumbar moment of each subjects was estimated based on a human body model. From the assessment results, a design guideline which has the range of the height from 652[mm] to 1162[mm] was proposed. Then additional assessment tests with five healthy subjects ($25.8{\pm}1.8yrs.$, $175.5{\pm}5.8cm$, $74{\pm}15.7kg$) were performed in order to verify effectiveness of the design guideline. The results showed a height-adjustable wash basin applied the proposed design guideline was effective to reduce the lumbar moment.

• The Korean Journal of Quaternary Research
• /
• v.32 no.1_2
• /
• pp.41-50
• /
• 2018

The most common method for estimating the uplifting rate is to measure the height of the coastal terraces. Coastal terraces are basically formed at the sea level position. During the Holocene age, both the height of the sea level and the coastal terrace are uncertain. The purpose of this paper is to clarify that the uplifting rate of the Korean Peninsula varies depending on the region, based on the height of sea level, the height of coastal terraces, and GPS observations. Gangwon-do and Jeolla-do provinces seem to have been stabilized at least since the beginning of the Holocene period. Overall distribution pattern of the uplifting rates on the Korean peninsula is likely to be related to the massifs. Of course, the boundaries of the massifs are faults, so the role of faults would be great. Essentially however, it is reasonable to consider that the difference in local uplift rates depends on the characteristics of the massif itself. The characteristics may include differences in response to stresses from tectonic movements, differences in crustal thicknesses, and so on.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.639-642
• /
• 2001

전형적인 비저항-온도 특성을 갖는 BaTiO$_3$계 PTC 세라믹을 일반적인 세라믹 공정을 이용하여 제조하였고, 결정립계면에 형성된 전위장벽의 높이를 구하였다. ZnO 바리스터의 전위장벽을 구하기 위해 이용되었던 커패시턴스-전압 관계식과는 다른 새로운 관계식을 제안하였고, 기존의 비저항-온도 관계식을 다소 변경한 관계식을 이용하여 전위장벽을 구하였다. 두 관계식으로부터 구한 전위장벽의 높이는 매우 유사한 값을 보이고 있으며 타 연구자들에 의해 보고된 값과도 잘 일치하고 있다. 비저항-온도 관계식과 커패시턴스-전압 관계식을 이용하여 130-18$0^{\circ}C$ 구간에서 구한 전위장벽의 크기는 각각 0.41-0.76V와 0.36-0.80V이었다.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.1-8
• /
• 2000

Third party damage is one of the causes intrimiting the safety of a buried pipelines and it is very important to detect third party damage on pipelines as soon as possible. The purpose of this study is whether third-party damage can be detected by accelerometer sensor and how far the third-party damage signal can propagate. And a pilot experiment was carried out in order to find third-party damage location. As a result, the detected signal's spectum is high frequency at short distances, as the distance is far, the signals in high frequency range are attenuated and those in low frequency range remain. It was also proved that third-party damage within 5.3km distance can be detected by monitoring vibration signals.