• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.420-424
• /
• 2009

In this research, to identify the degree of preference and participation in leisure sports, over 19-year-old adults living in the capital region were collected as subjects, and among them, 250 persons were chosen by sampling. Using SPSSWIN 16.0, I analyzed the collected data by Reliability Analysis, Paired Sample T-Test, and IP A method. The conclusion is the following. First, the first quadrant showed skins-cuba, water-ski, wind surfing, and clay-pigeon shooting, and as a result of this, it is necessary to improve the degree of participation in this field. Secondly, the second quadrant showed golf, snow board, ski, fishing, and climbing, and these field need to specific attention to maintain continuous attention, for they have a great deal of attendance. Thirdly, in the third quadrant, there are water sleigh, cart, balloon, sky-diving, orienteering, hang gliding, model plane, and survival game. As the degree of preference and participation in these sports is low, it is recommended that more effort should be made for these sports. Finally, in the forth quadrant, there are tracking, mountain bike, inline skates, rafting, and cycling. As it's the participation is high, while that of preference is low, it is important to maintain the policy of the participation in leisure sports. In conclusion, for the sports which is preferred that is difficult to join right now, most of all, it is necessary that we should pay attention to and invest the social infrastructure in which main items cannot be joined now.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.2-8
• /
• 2012

In this study, in order to develop renewable bio-based nanocomposites, multi-functional nanocomposites from soybean resins (AESO, MAESO) and nanoclay were prepared. Photoelectrodes for environmental friendly dye-sensitized solar cell using soybean resin were also prepared. Organo-modified nanoclay was directly dispersed in functionalized soybean resins after mixing with styrene as a comonomer and radical initiator was used to copolymerize the nanocomposites. The observed morphology was a mixture of intercalated/exfoliated structure and the physical properties were improved by adding nanoclay. A nanocomposite using MAESO, which added COOH functional group to the soybean resin, showed better dispersibility than AESO composites. Ultrasonic treatment of the nanocomposites also improved the physical properties. Nanoporous $TiO_2$ photoelectrode was also prepared using soybean resins as a binder, after acid-treatment of $TiO_2$ surface using nitric acid. Dye-sensitized solar cells were prepared after adsorbing dye molecules on it. The $TiO_2$ photoelectrode prepared using soybean binder had high current density because of increased surface area by improved dispersibility. The photoelectrochemical properties and conversion efficiency of the solar cell were significantly improved using the soybean binder.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.62-62
• /
• 2000

도공지 제조 시 적절한 표면특성을 지닌 원지를 사용하는 것은 최종 도공지 품질향상은 물론 조업성 개선에도 필수적인 요소이다. 이러한 목적을 달성하기 위해 도공원지의 표면 사이징이 실시되고 있다. 도공원지의 표면 사이정 시 양성전분을 이용할 경우 서로 반대로 하전된 전분 과 섬유 사이에 발현되는 정전기적 인력에 의해서 표면 사이정 전분의 원지로의 전분 침투가 억제되어 도공원지의 불투명도, 광택도 인쇄적성 둥의 물성 향상을 꾀할 수 있다. 또 이러한 원지를 이용하여 도공을 할 경우 음전하를 띤 도공액 구성성분과 양전하를 띤 원지 표면의 정 전기적 작용에 의해 도공액의 부동화가 촉진될 수 있으므로 도공액의 표면 잔류성이 향상되 며, 도공층 공극 구조 개선에 따른 광학적인 성질의 개선도 기대할 수 있을 것으로 기대된다. 본 연구에서는 양성전분으로 표면 사이정 된 원지를 사용한 도공지와 기존의 산화전분을 이용하여 표면 사이정한 원지를 이용하여 제조된 도공지의 특성을 비교하였다. 또 양성전분에 의한 표면 사이징 효과를 보다 극대화하고 도공안료와 원지 표면과의 반응성을 증가시키기 위 해 양이온성 폴리머를 표면 사이정 시 첨가하여 표면 사이칭을 하는 방법을 평가하였다. 아울 러 양성전분과 도공안료와의 반응에 따라 도공층의 부동화가 촉진될 수 있다는 근거를 구명하 기 위해 레올로지적인 접근을 시도하였으며, 도공층의 공극 특성 관찰, 광산란 및 광홉수 계수 측정 등을 통해 양성전분으로 표면 사이정된 도공층의 구조적 특성을 분석하였다. 그 결과 산화전분에 비해 양성전분으로 표면 사이징한 원지의 경우 도공지의 불투명도가 높게 나타났다. 이는 양성전분으로 표면 사이정한 원지를 사용한 경우 도공층의 구조가 광 산란계수를 향상시킬 수 있도록 변화되었기 때문임을 확인하였다. 표면 사이징시 양이온성 폴리머를 첨가할 경우 불투명도 개선에 상당한 효과가 있었으며, 전분 대비 1% 이하의 첨 가량에서도 어느 정도의 개선이 가능하였다. 양성전분에 의한 도공액의 조기 부동화가 발현 된다는 것을 구명하기 위해서 도공액의 점탄성적 평가를 실시한 결과 산화전분에 비해 양성 전분 상에서 도공액의 storage modulus가 높고 critical strain point 역시 높은 값을 나타낸 다는 것을 확인하였다. 이는 양성전분과 도공액, 특히 클레이와의 정전기적 인력에 의한 반 응 결과로 생각된다. 양성전분을 이용한 도공원지의 표면 사이정 기술은 특히 평량이 낮은 도공지의 경우 수분 의 침투를 억제함으로써 도공공정에서의 지절을 감소시킬 뿐 아니라 불투명도 등 광학적 성질 을 개선시키고, 표면 커버리지를 향상시키는 효과를 나타낼 것으로 기대된다.

• Clean Technology
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2013

BBiodegradable polymers have attracted great attention because of the increased environmental pollution by waste plastics. In this study, PLA (polylactic acid)/Clay-20 (Cloisite 20) and PLA (polylactic acid)/PBS (poly(butylene succinate)/Clay-20 (Cloisite 20) nanocomposites were manufactured in a twin-screw extruder. Specimens for mechanical properties of PLA/Clay-20 and PLA/PBS (90/10)/Clay-20 nanocomposites were prepared by injection molding. Thermal, mechanical, morphological and raman spectral properties of two nanocomposites were investigated by differential scanning calorimetry (DSC), tensile tester, scanning electron microscopy (SEM) and raman-microscope spectrophotometer, respectively. In addition, hydrolytic degradation properties of two nanocomposites were investigated by hydrolytic degradation test. It was confirmed that the crystallinity of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposite was increased with increasing Clay-20 content and the Clay-20 is miscible with PLA and PLA/PBS resin from DSC and SEM results. Tensile strength of two nanocomposites was decreased, but thier elongation, impact strength, tensile modulus and flexural modulus were increased with an increase of Clay-20 content. The impact strength of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposites with 5 wt% of Clay-20 content was increased above twice than that of pure PLA and PLA/PBS (90/10). The hydrolytic degradation rate of PLA/Clay-20 nanocomposite with 3 wt% of Clay-20 content was accelerated about twice than that of pure PLA. The reason is that degradation may occur in the PLA and Clay-20 interface easily because of hydrophilic property of organic Clay-20. It was confirmed that a proper amount of Clay-20 can improve the mechanical properties of PLA and can control biodegradable property of PLA.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.260-267
• /
• 2006

SBR (styrene-butadiene rubber; 25 wt% of solid contents) nanocomposites reinforced with OLS(organically modified layered silicates) were manufactured via the latex method. Two types of OLS are prepared, i.e. dodecylamine (primary amine) modified montmorillonite (DA-MMT) and N, N-dimethyldodecylamine (tertiary amino) modified MMT (DDA-MMT). X-ray diffraction (XRD) and transmission electron microscopy (TEM) were employed to characterize the layer distance of OLS and the morphology of the nanocomposites. SBR nanocomposites reinforced with ternary phase filler (carbon black/silica/OLS) systems also manufactured. Dynamic mechanical thermal analysis (DMTA) was performed on these composites to determine the loss factor (tan $\delta$) over a range of temperature($-20^{\circ}C{\sim}80^{\circ}C$). The results showed that there was significant changes on the values or tan $\delta$ with the addition of small amount of the OLS. By increasing the contents of OLS, the values of tan $\delta$ at $0^{\circ}C$ increased but those of tan $\delta$ at $60^{\circ}C$ decreased with increasing OLS contents.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.104-108
• /
• 2011

In the non-conductive adhesives (NCAs) for adhesion of micro electro mechanical system (MEMS), there are some problems such as delamination and cracking resulting from the large differences of coefficients of thermal expansion (CTE) between NCAs and substrates. So, the addition of inorganic particles such as silica and nano clay to the CTEs composit have been applied to reduce the CTEs of the adhesives. Additions of the flexibilizers such as siloxanes have also been performed to improve the flexibility of epoxy composite. Amino modified siloxane (AMSs) were used to improve compatibility between epoxy and siloxane. In this study, glass transition temperatures (Tg) and moduli of those composites were measured to confirm the effects of AMS with two different equivalents on thermal/mechanical properties of AMS/epoxy composites. Tg of KF-8010/epoxy composites decreased from 148 to $122^{\circ}C$ and those of X-22-161A/epoxy composites decreased from 148 to $121^{\circ}C$. Moduli of KF-8010/epoxy composites decreased from 2648 to 2143 MPa by adding KF-8010 and moduli of X-22-161A/epoxy composites decreased from 2648 to 2014 MPa. In short, using long Si-O chain AMS leads to a greater decrease in moduli. However, haven't showed significant differences in Tg's.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.85-94
• /
• 2006

In the 2000s, character animation technique is used at domestic TV character animation ads of diverse items displaying new character patterns and expression techniques of a high level. This study intends to identify the characteristics of TV character animation ads based ell character aesthetic theory and advertising rhetoric theory, and based on these findings, analyze trend and stream of expression in TV character animation ads by examining and classifying advertisements released in the past four years by items, character patterns and expression techniques. The results showed that TV character animation ads have been concentrated on confectionery, beverages and foods in the past, but the items have been diversified through the years. With reference to character patterns, personal and animal characters had made the main pattern, but recently product, virtual and composite characters are on the increase. In expression techniques, cell animation technique was found to be the most frequently used technique, which was followed by full-3D, cell and live action, cell and 3D and the clay animation technique. A trend like this suggests that TV character animation advertising items will continue to increase in line with the participation level of targets. In the meantime, personal and animal characters will continue to make the leading character pattern, while virtual and composite character patterns emerge in new forms. In expression techniques, live action combined with 30 technique and techniques using new expression materials will appear with cell animation technique as a central figure. As a whole, Korean character animation advertisement is expected to keep on growing to a new dimension in the aspect of items, character patterns and expression technique.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.241-259
• /
• 2022

In general, the REE were produced by mining conventional deposits, such as the carbonatite or the clay-hosted REE deposits. However, because of the recent demand increase for REE in modern industries, unconventional REE deposits emerged as a necessary research topic. Among the unconventional REE recovery methods, the REE-bearing coal deposits are recently receiving attentions. R-types generally have detrital originations from the bauxite deposits, and show LREE enriched REE patterns. Tuffaceous-types are formed by syngenetic volcanic activities and following input of volcanic ash into the basin. This type shows specific occurrence of the detrital volcanic ash-driven minerals and the authigenic phosphorous minerals focused at narrow horizon between coal seams and tonstein layers. REE patterns of tuffaceous-types show flat shape in general. Hydrothermal-types can be formed by epigenetic inflow of REE originated from granitic intrusions. Occurrence of the authigenic halogen-bearing phosphorous minerals and the water-bearing minerals are the specific characteristics of this type. They generally show HREE enriched REE patterns. Each type of REE-bearing coal deposits may occur by independent genesis, but most of REE-bearing coal deposits with high REE concentrations have multiple genesis. For the case of the US, the rare earth oxides (REO) with high purity has been produced from REE-bearing coals and their byproducts in pilot plants from 2018. Their goal is to supply about 7% of national REE demand. For the coal deposits in Korea, lignite layers found in Gyungju-Yeongil coal fields shows coexistence of tuff layers and coal seams. They are also based in Tertiary basins, and low affection from compaction and coalification might resulted into high-REE tuffaceous-type coal deposits. Thus, detailed geologic researches and explorations for domestic coal deposits are required.