• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1153-1164
• /
• 2007

One of the most challenging technical issues in mobile communication for multimedia is Quality of Service (QoS) management of handover calls. This paper proposes a 2-level handover control system to copy with this problem. A 2-level handover control system consists of resource reservation and call admission control modules. The resource reservation module divides the network resource into Hard and Soft reserved resource. The Hard reserved resource is only for the handover calls while the Soft reserved resource is for both the handovers and the new calls. And also, the resource reservation module classifies handovers into primary and secondary handovers based on often they occur. The call admission control module deals with the primary and secondary handover calls in different ways. The new calls can use Soft reserved resource only if there is sufficient amount available in the Hard reserved resource. Proposed system is evaluated using an M/M/c/c queueing model. It is shown that proposed system allows more efficient utilization of network resource without degrading QoS comparing with the legacy handover control systems.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.433-440
• /
• 2011

In this paper, we propose a new scheduling method that can guarantee reliable jitter by minimizing the queue length variation in the streaming service provisioning such as IPTV and VoD. The amount of traffic to be delivered within a certain time is very fluid because MPEG-4 and H.264 encoders use VBR(Variable Bit Rate) for delivering video streaming traffic. This VBR characteristic increases the end-to-end propagation delay variation when existing scheduling methods are used for delivering video frames. Therefore, we propose the new scheduling method that can minimize change rate of queue length by adaptively controling service rate taking into account the size of bulk incoming packets and arrival rate for bulk streaming traffic. Video frames can be more reliably transmitted through the minimization of the queue length variation using the proposed method. We use the queueing model and also carry out OPNET simulation to validate the proposed method.

• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.33-46
• /
• 2022

This paper, in order to minimize the ground waiting time of an Air tanker, the queuing theory, that is, a queue that calculates the waiting time under single-server and multi-server situations, was used in the study. Since the national budget and resources are limited, the unlimited increase of the logistics support service team is limited. Therefore, the number of logistic support service teams that can adaptively control the ground waiting time according to the wartime preparation stage or war environment was calculated. The results of this study provide a stipulated standard for calculating the optimal number of air tanker logistic support service teams of the Air Force, providing a basis for the logistical commander to assign logistic support service teams to each stage from peacetime to wartime.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.421-429
• /
• 2000

In present, ATM integrated switching system has been developed to a mixed modules that complexed switching system including maintenance, operation based on B-ISDN/LAN service and plug-in module, , which runs on workstation computer system. Meanwhile, workstation has HMI operation system feature including file system management, time management, graphic processing, TMN agent function. The workstation has communicated with between ATM switching module and clients. This computer system architecture has much burden messages communication among processes or processor. These messages communication consume system resources which are socket, message queue, IO device files, regular files, and so on. Therefore, in this paper we proposed new performance modeling with this system architecture. We will analyze the system bottleneck and improve system performance. In addition, in the future, the system has many additional features should be migrated to workstation system, we need previously to evaluate system bottleneck and redesign it. In performance model, we use queueing network model and the simulation package is used PDQ and C-program.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.73-82
• /
• 2008

There are several approaches for reducing the ROB(Reorder Buffer) complexity in processors. The one technique that makes the simplest ROB ports relies on a distributed implementation that spreads the centralized ROB structure across the functional units(FUs). Each distributed buffers are decided on the size of them by workload of the functional units. The performance of the processor depends on the size of distributed ROB. However, most of previous works have depended on the simulation results to decide the optimsize of distributed ROB. In this Paper, we use an analytical model based on the M/M/1 Queuing theory to determine the optimum size of each distributed ROB. Our schemes are evaluated by using the simulation performed by the CPU2000 benchmarks. We are able to choose the optimum size of distributed ROB showing the 99.2% performance compared with existing superscalar processors. We can save 82% hardware resources in ports and reduce more than 30% of delay when ROB and distributed ROB proposed in this paper are designed by HDL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.942-955
• /
• 2000

This paper proposes enhanced designs of global service logic and information flow for the mass-call based IN service, which increase call completion rates and optimize the resource in joint wired and wireless networks. In order to hanve this logic implemented, we design a Dynamic Queue Manager(DQM) applied to the call queuing service feature in the Service Control Point(SCP). In order to apply this logic to wireless service subscribers as well as wired service subscribers, the service registration flags between the Home Location Register(HLR) and the SCP are managed to notify the DQM of the corresponding service subscribers’ mobility. Hence, we present a dynamic queue management mechanism, which dynamically manages the service group and the queue size based on M/M/c/K queueing model as the wireless subscribers roam the service groups due to their mobility characteristics. In order to determine the queue size allocated by the DQM, we simulator and analyze the relationship between the number of the subscriber’s terminals and the drop rate by considering the service increment rate. The appropriate waiting time in the queue as required is simulated according to the above relationship. Moreover, we design and implement the DQM that includes internal service logic interacting with SIBs(Service Independent building Blocks) and its data structure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.171-180
• /
• 2004

CDP(handoff Call Dropping Probability) and CBP(new Call Blocking Probability) have been used as two important call level QoS parameters in cellular mobile communications. But, many methods to reduce CDP without considering CBP have been studied, and hand-off call priority scheme has been introduced. But the use of hand-off call priority scheme increases CBP and decreases channel utilization rate depending on the number of reserved channel for priority. In this paper, we propose a CAC(Call Admission Control) algorithm with overflow and preemption to solve the problem caused by considering CDP and CBP in calculation of the number of channel reserved. The problem is the increase of CDP as the traffic load increases. In our CAC algorithm, hand-off call is permitted to use(overflow) unreserved and unused channel if there is no reserved and unused channel, and new call is permitted to use(preemption) the channel overflowed by hand-off call if there is no unreserved and unused channel. This mechanism of calculation of the number of reserved channel and CAC algorithm is expected to increase channel utilization rate, and can be applied to media-based QoS provision in cellular mobile communications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.134-141
• /
• 2008

This paper presents an innovative load management technique that can effectively lower the summer peak load by adjusting the aircondition loads through smoothe coordinations between utility companies and large customers. An intelligent hierarchical load management system composed of a Central Intelligent Load Management System(CIMS) and multiple Local Intelligent Management Systems(LIMS) is also proposed to implement the reposed technique. Upon receiving a load curtailment request from the utilities, CIMS issues tokens, which can be used by each LIMS as a right to turn on the airconditioner. CIMS creates and maintains a queue for fair allocation of the tokens among the LIMS demanding tokens. By adjusting the number tokens and queue management Policies, desired load factors can be achieved conveniently. The Markov Birth and Death Process and the Balance Equations are employed in estimating various queue performances. The proposed technique is tested using a summer load data of a large apartment complex and proved to be quite effective in load management while minimizing the customer inconveniences.