• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2008

The purpose of this study is to attempt to use broken red brick, which is categorized as impurities of circular aggregate to thick aggregate, as a replacement for concrete. Through the material test and performance test for each mixing rate of the broken red brick (0%, 30%, 60%), the following conclusion was reached by studying the material and structural characteristics of circular aggregate to the concrete. Even though broken red brick, which is categorized as impurities of circular aggregate, is mixed 30% with normal rubble, the compression strength, intensity strength, and curving strength was similar to that of concrete that uses normal rubble. Therefore, concrete beam made with broken red brick can be applied to the real construction field. Also, the study regarding the cutting test of the concrete that uses broken red brick and regarding applying and mixing admixture that can increase the ductility factor will be required in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.47-56
• /
• 2003

The production of industrial wastes have increased due to the growth of population and industrial development. Among these wastes, especially amount of paper ash has been increased year after year. If it is possible to reuse industrial wastes, it will be beneficial not only economically but also environmentally. In this study, the possibility of the utilization of paper ash were investigated as a construction materials through a series of laboratory testing carried out to evaluate physical properties, compaction, consolidation, permeability and compressive strength characteristics. Concrete bricks with replacement ratio of paper ash at 2, 4, 6, 8, 10, 12, 14, 16, 18, 20%, and clayey bricks with replacement ratio of paper ash at 5, 10, 15, 20, 25, 30% were used in the test in order to evaluate its quality. As a result of tests, it were shown that the maximum replacement ratio of paper ash satisfying the quality standards of concrete bricks and clayey bricks were 11.5% and 12%, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.373-380
• /
• 2023

This study investigated the carbonation of concrete brick cured in a CO₂ environment for the utilization of CO₂ captured in power plants. Concrete brick specimens were produced with electric arc furnace reducing slag (ERS) and electric arc furnace oxidizing slag (EOS), and cured for 3 days in a CO₂ chamber with a concentration of 20 % or in a constant temperature and humidity chamber. The weight change, compressive strength, flexural strength and carbonation depth of concrete bricks were measured. From the results, it was found that when subjected to CO₂ curing, CO₂ was absorbed at the level of 2.4 % of the weight of the specimen. The specimen incorporating ERS showed the highest carbonation depth, and satisfied KS F4004 standards for the concrete brick. Therefore, it is expected that the captured CO₂ can be utilized in the CO₂ curing process of concrete brick.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.87-92
• /
• 2001

Until now, disposal of casting foundry fly ash generally depends on reclamation. This is the great loss from a point of view saving of resources and utilizing industrial wastes. Therefore, a study on the use of fly ash as a substitute material for construction is necessary in order to utilize industrial wastes, to reduce cost of production, to improve quality in producing concrete products, and to protect environment from pollution. In this study, concrete products(hollow concrete block and concrete brick) using casting foundry fly ash as a substitute materials for cement, are produced. And experiments are conducted based on Korean Industrial Standards. Finally, the used methods of casting foundry fly ash as a substitute materials in industry are presented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.87-98
• /
• 2011

Clay bricks with lime mortar are recently popular since they are eco- and environment-friendly construction material being capable of air flow and moisture movement. However, there is little study on those of clay brick an lime mortar while relatively many researches on the structural characteristics of concrete bricks with cement mortar are available in Korea. Furthermore, the current Korean Building Code of masonry structures was established on the base of the Foreign Codes which does not reflect Korean masonry construction circumstance, such as material characteristics and section properties. To overcome these problems, experiments of masonry structures constructed using clay bricks with lime mortar were carried out to evaluate their structural characteristics such as, prism compressive strength, adhesive strength and diagonal tensile(shear) strength. Also this research compares the mechanical characteristics between clay bricks with lime mortar and concrete bricks with cement mortar to provide information that will be used for revisions of the domestic standards for masonry structures. As masonry structures constructed with clay bricks and lime mortar show different aspects over the ones constructed with concrete bricks and cement mortar, we suggest estimation equation of prism compressive strength and diagonal tensile strength on masonry structures constructed with clay bricks and lime mortar.

• Journal of Radiation Protection and Research
• /
• v.16 no.1
• /
• pp.15-24
• /
• 1991

Radon-222 exhalation rate from several domestic building materials were experimentally measured by using radon cup method, in which a CR-39 plastic is used as a passive radon detector. The radon detection factor of CR-39 detector determined in a series of calibration experiments was $0.164{\pm}0.005(tracks\;cm^{-2}/Bq\;d\;m^{-3})$, which is consistent with those reported by other investigators. The radon exhalation rates of several building materials (brick, red brick, concrete block, granite plate, concrete floor and wall) ranges from $6.8{\times}10^{-6}\;(granite plate)\;to\;75.0{\times}10^{-6}Bq/m^2-sec(brick)$ with the increasing order of granite plate, red brick, concrete wall, concrete block, concrete floor and brick. It showed that the CR39 radon cup can be efficiently utilized in measuring the radon-222 gas exhalation rate from building materials.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.159-166
• /
• 2012

본 연구는 조적공사 중 반매(0.5B)쌓기 시멘트벽돌 시공시 개구부 상부에 시공되는 중량의 인방보용 콘크리트 구조물 대신 경량의 강재구조물을 안전하게 사용할 수 있도록 강재구조물이 개구부 상부 시멘트벽돌 하중을 견딜 수 있는지 실험을 통해 검증해 보기위한 것이다. 강재구조물이 시멘트벽돌을 쌓는데 방해가 되지 않도록 강재구조물 형상을 제안하였고 휨실험을 실시하여 구조형상을 검증하였다. 실험결과를 바탕으로 강재구조물에 치올림(camber)을 두어 시멘트벽돌 반매(0.5B)쌓기 실물 재하시험을 실시한 결과 시공성이 개선되고 공사 중 안전사고 방지에도 효과가 있는 것으로 확인되었다.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.317-338
• /
• 2022

Physicochemical characteristics and evaluation were studied by subdividing the concretes, bricks and earth pipes on the site of the Japanese Ministry of General Affairs in Joseon Dynasty, known as modern architecture, into three periods. Concretes showed similar specific gravity and absorption ratio, and large amounts of aggregates, quartz, feldspar, calcite and portlandite were detected. Porosity of the 1907 bricks were higher than those of 1910 and 1950 bricks. All earthen pipe is similar, but the earlier one was found to be more dense. Bricks and earthen pipes are dark red to brown in color within many cracks and pores, but the matrix of the earthen pipe is relatively homogeneous. Quartz, feldspar and hematite are detected in bricks, and mullite is confirmed with quartz and feldspar in earthen pipes, so it is interpreted that the materials have a firing temperature about 1,000 to 1,100℃. Concretes showed similar CaO content, but brick and earthen pipe had low SiO₂ and high Al₂O₃ in the 1907 specimen. However, the materials have high genetic homogeneity based on similar geochemical behaviors. Ultrasonic velocity and rebound hardness of the concrete foundation differed due to the residual state, but indicated relatively weak physical properties. Converting the unconfined compressive strength, the 1st extended area had the highest mean values of 45.30 and 46.33 kgf/cm², and the 2nd extended area showed the lowest mean values (20.05 and 24.76 kgf/cm²). In particular, the low CaO content and absorption ratio, the higher ultrasonic velocity and rebound hardness. It seems that the concrete used in the constructions of the Japanese Ministry of General Affairs in Joseon Dynasty had similar mixing characteristics and relatively constant specifications for each year. It is interpreted that the bricks and earthen pipes were through a similar manufacturing process using almost the same raw materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.207-208
• /
• 2023

Concrete bricks and hollow concrete block products manufactured using ordinary portland cement react with salt and carbon dioxide absorbed from the soil and atmosphere in the use environment, causing contamination such as efflorescence. This is due to the reaction between calcium hydroxide, a cement hydration product, and carbon dioxide, producing and eluting calcium carbonate. This study was a preliminary study to compare and evaluate the reduction of efflorescence in concrete bricks and hollow concrete block products manufactured using carbon dioxide reaction hardening cement. The purpose was to evaluate the efflorescence occurrence in products using ordinary Portland cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.173-176
• /
• 2004

This study is contents about the method which separates ASCON, the tiles and the reds bricks in recycled aggregates. The method of separation used difference of specific gravity.