• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.51-60
• /
• 1990

Dose distributions around Co- 60 moving source in high dose rate remote afterloading unit, Buchler 3K unit, were experimented with X-omat V films and calculations. In our experiments, film dosimetries have achieved to evaluated the axial dose distributions for source oscillations were 0, 3.5, 5.0 and 6.0 cm in periodically, In results, the dose distributions in axial of source movement showed apparently higher than in transverse direction caused by source locations, dwelling time and air gap in the applicator. In the calculations, the dose rate was derived by using the inverse square law, filteration corrections and Meisberger constant for scatter corrections as source movings. In our experiments and calculations, the average dose uncertainties were showed -2.1$\pm$1.9% in fixed sourdce, -2.9$\pm$1.8%, -7.4$\pm$6.1% and -6.7$\pm$4.6% at 3.5 cm, 5.0 cm and 6.0 cm source oscillations, but the calculations have showed very close to experimental dose rate within 4 cm distance from source.

• Radiation Oncology Journal
• /
• v.8 no.2
• /
• pp.151-154
• /
• 1990

The acute effects of variable dos rates to total body irradiation (TBI) were investigaed with 600 cGy of single exposure in the mice as a preclinical model. Total 80 mice (ICR) were used. Twenty of which sewed as controls, receiving no irradiation. All irradiated mice showed a universal decline in their weight and white blood cell count. The degree of weight loss and leukopenia were similar at 3 different dos rate but slightly prominent with 15 cGy/minute group. The degree of recovery among the groups showed no dose rate dependence. Our results suggest that TBI with 15 cGy/mimute may be applicable for clinical therapy with careful evaluation of patient's condition.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.536-541
• /
• 2015

The purpose of this study was to evaluate the marginal and internal gap of Cobalt (Co)-Chromium (Cr) sintering metal coping fabricated by dental computer-aided design/computer-aided manufacturing systems. Abutment tooth 46 of universal numbering system was selected for the study. Twenty Co-Cr metal copings of two groups were manufactured and scanned. Co-Cr cast metal copings (CCM) group of ten were fabricated using investment, burnout and casing after subtractive manufacturing of wax block. Also, Co-Cr sintering metal copings (CSM) group of ten were fabricated using sintering processing after subtractive manufacturing of Co-Cr soft metal bock. Marginal and internal gap of Co-Cr metal copings of twenty were measured by digital microscope (${\times}160$) with silicone replica technique. The data was analyzed from IBM SPSS Statistics ver. 22.0 Statistical software for Mann-Whitney U test (${\alpha}=0.05$). $Mean{\pm}standard$ deviation of marginal gap of CCM group was $90.12{\pm}61.73{\mu}m$ of CSM group was $60.17{\pm}24.83{\mu}m$. However, two groups was statistically not different (p>0.05). This study showed that CSM group was clinically acceptable adaptation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.40.2-40.2
• /
• 2011

초경합금은 경도가 높은 재료를 말하며 일반적으로는 탄화텅스텐(WC)계 재료를 말한다. 국내 현재 초경합금 동향은 반도체 산업, 내마모성 공구, 절삭공구, 금형 등 많은 분야에 사용되어지고 있다. 또한 최근 들어 FSW (Friction Stir Welding, FSW)기술이 발전함에 따라 접합기술개발이 다양화되면서 FSW Tool의 고성능의 초경 재료가 요구되어지며 장수명의 Tool개발이 되어야 한다. 국내에서는 초경 합금 재료로 사용되어지고 있는 텅스텐 카바이드(WC)와 코발트(Co)를 이용하여 많은 연구가 진행되었다. 본 실험에서는 텅스텐 카바이드와 코발트 및 몰르브덴 카바이드를 혼합하여 소결체를 제조하였다. 실험에 사용된 텅스텐 카바이드는 높은 경도를 가지고 강한 취성을 나타내며, 소결에 어려운 단점이 있다. 이러한 단점을 코발트와 몰리브덴 카바이드를 첨가하여 소결온도를 낮춰주는 역할과 액상 소결시 텅스텐카바이드 입자사이에 침투하여 액상소결에 의한 치밀화가 가능하게 해주며 인성이 향상되어 고인성 재료를 만들 수 있었다. 본 실험에서는 합성과 치밀화가 동시에 진행되는 SPS (Spark Plasma Sintering:SPS) 장비를 이용하여 실험을 진행하였다. 이 방법은 방전플라즈마 소결 공법으로, 기존의 연소법과 열간 가압기술(Hot-press, HIP)을 결합한 방식으로 단 시간, 단일공정으로 치밀한 소결체를 얻을 수 있는 장점이 있다. 본 연구에서는 $WC-5Mo_2C$-5wt%Co 소결체 제조를 위해 원소 분말을 Horizontal ball milling 혼합하였다. 균일하게 혼합된 분말을 흑연다이에 충진하여 펄스전류와 기계적 압력을 동시에 가하여 $WC-5Mo_2C-5Co$ 복합재료를 제조하고 소결체의 밀도, 순도, 상변태, 미세조직 등을 분석 및 평가하였다. SPS공정 조건은 고진공하에서 $1,200^{\circ}C$-60MPa, 펄스비 12:1 조건으로 수행하였으며, 얻어진 $WC-5Mo_2C-5Co$ 소결체의 상대 밀도는 98%이상 이였다. 또한, 결정립 크기는 약 400 nm였으며, 경도는 $2,453kg/mm^2$를 나타내었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.337-339
• /
• 2003

The technology removing radionuclides from soil using soil washing was studied. The main radionuclides contaminated in the soil are Cs$^{137}$ and Co$^{60}$ . It is suitable that scrubbing time is 4 hours and a mixing ratio of soil weight and washing solution volume is 1:10. more than two times continuous scrubbing method with 0.5 M oxalic acid was needed to remove Cs$^{137}$ and Co$^{60}$ from soil more than 70%. Radionuclides removal efficiencies of recycling washing solutions recycled with strong acid resins until 5 times are similar to that of 0.5 M oxalic acid.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.57-60
• /
• 2002

국내에서 사용되고 있는 대부분의 화재대피용 방독마스크 정화통은 외국에서 고가에 수입되고 있거나, 국내 제조시는 많은 기술을 외국에 의존하고 있다. 이들 정화통의 충진재는 일산화탄소(CO)를 제거하기 위해 망간(Mn), 구리(Cu)등을 활성탄에 담지시켜 제조한 촉매층과 $SO_2$, HCI 등의 유독가스를 제거하기 위한 제올라이트 등의 흡착층으로 구성되어있다. 그러나 이들 충진재중 CO 제거용 촉매는 상온에서 CO의 제거효율이 낮아 많은 양을 충진해야 하는 어려움이 있다.(중략)

• Journal of the Korean Solar Energy Society
• /
• v.35 no.4
• /
• pp.9-15
• /
• 2015

Black cobalt solar selective coatings were prepared by using an electroplating method. The changes in the optical properties of the black cobalt selective coating due to thermal degradation were analyzed by using the Auger electron spectroscopy (AES) and spectrophotometer. The black cobalt selective coating was prepared on a copper substrate by using a synthesized electrolyte with $CoCl_2$ and KSCN at a current density of ${\sim}0.5A/dm^2$ for 45s ~ 60s. Its optical properties were a solar absorptance (${\alpha}$) of the order of 0.80 ~ 0.84 and a thermal emittance (${\epsilon}$) of 0.01. From the AES depth profile analysis of heated sample, thermal degradation of the black cobalt selective coating heated for 33 hours at temperature of $350^{\circ}C$ occurred primarily due to interdiffusion at interface of cobalt and copper substrate. This results were predictable that the ${\alpha}$ decreases due to the thermal oxidation and diffusion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.357-362
• /
• 1998

PWR 정지시 일차계통 수화학 제어의 주요대상은 계통표면에 침적된 부식생성물의 주성분인 비화학양론적 니켈(코발트)페라이트로서, 산성-환원 단계에서 용존수소에 의해 Ni$^{\circ}$ (또는 Co$^{\circ}$)로 환원되고 산성-산화 단계에서 용존산소에 의해 Ni$^{2+}$ (또는 CO$^{2+}$)로 산화되어 이온교환기에 의해 제거된다 본 연구에서는, 니켈 및 코발트 산화물의 25~300 $^{\circ}C$ 환원 또는 산화반응 시 표준자유에너지의 변화 및 용존수소 또는 용존산소의 요구농도를 계산하여, 원자로 정지시 일차계통수 용존 기체의 제어조건을 고찰하였다. 산성-환원 단계의 냉각재 온도인 300~82$^{\circ}C$ 범위에서 용존수소가 충분할 경우 열역학적으로 $^{58}$ Co(또는 $^{60}$Co)Fe$_2$O$_4$$\longrightarrow$Co의 역반응이 억제되므로서 노심외 계통부위 침적이 감소될 수 있기 때문에, 용존수소를 온도에 따라 요구농도 곡선 위로 약간 높게 유지하는 것보다 25~50 cc/kg-$H_2O$로 유지하는 방식이 바람직한 반면, 용존산소를 제공하는 과산화수소 농도가) 2.7 ppm일 때 NiFe$_2$O$_4$$\longrightarrow$Ni$_2$O$_4$(+$\alpha$-Fe$_2$O$_3$) 반응이 일어날 수 있기 때문에, 산성-산화 단계에서는 과산화수소의 냉각재 농도를 이보다 낮게 유지하는 것이 바람직하다.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.223-231
• /
• 2016

The effects of White Ginseng and Fermented Ginseng on liver damage induced by $^{60}Co$ r-ray irradiation were investigated. To one group of ICR male mice were given in White Ginseng(150 mg/kg/day for 7days, orally) before 5Gy(1.01Gy/min) dose of $^{60}Co$ r-ray irradiation. To another group were given in Fermented Ginseng (150 mg/kg/day for 7days, orally)before 5Gy(1.01Gy/min)dose of $^{60}Co$ r-ray irradiation was investigated. Radiation irradiation group were given with saline(0.1 ml) and 5Gy. Contrast group were given with saline(0.1 ml). The levels of $H_2O_2$, catalase and MDA in liver tissue were measured. In Fermented Ginseng (FG+Rad) group and white Ginseng(WG+Rad) group than irradiation group(Rad), the catalase level were significantly increased, and the catalase levels were appeaWhite at radiation protection. It was significantly decreased to MDA and $H_2O_2$ level to Fermented Ginseng (FG+Rad) group and white Ginseng(WG+Rad) group than irradiation group(Rad). Therefore, Fermented Ginseng and white Ginseng were very excellent protector on radiation of liver in mice.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1003-1007
• /
• 1999

The activity and products distribution for the hydrogenation of butadiene and pentadiene over the gold and cobalt catalysts prepared by coprecipitation and impregnation method was investigated with using a flow reactor under atmospheric pressure. The reaction characteristics of the highly dispersed gold particles and its role were studied. The activity of the gold catalyst by coprecipitation was much higher than that by impregnation. The selectivity of butene on all gold particles was always 100% even in the absence of butadiene in the stream, but butadiene on cobalt supported catalyst was easily hydrogenated to butane. It was therefore considered that the active sites at circumferences of the gold particles possessed an unique property which took a proper affinity to hydrogen. In the hydrogenation of butadiene and pentadiene, the percentages of 1-butene and 2-pentene were 60%~70% and about 62%, respectively. The results could be simply explained by a statistical concepts of hydrogen addition.