• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3A
• /
• pp.129-139
• /
• 2003

CAC is a very important issue in CDMA system in order to protect the required QoS(quality of service) and increase the system's capacity. In this paper, we proposed and analyzed a call admission control scheme using multiple thresholds, which can provide quick processing time and better performance. There are two effective thresholds used to decide call admission. One is the number of active users, and the other is the signal to interference ratio(SIR). If the threshold of active users are lower than the low number of users threshold, we accept the new call without any other conditions. Otherwise, we check the current SIR to guarantee the quality of our service. System then accepts the new call when the SIR satisfies system requirement. Otherwise, the call will be rejected. Multiple threshold schemes are investigated and their performance is compared with the number of user and power based CAC's. simulation results are provided to evaluate the performance.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.517-522
• /
• 2001

The appearance of web technology has accelerated a role of the development of the multimedia technology, the computer communication technology and the multimedia application contents. And serveral researches of WBI (Web-based Instruction) system have combined the technology of the digital library and LOD. Recently WBI (Web-based Instruction) model which is based on web has been proposed in the part of the new activity model of teaching-learning. And the demand of the customized coursewares which is required from the learners is increased, the needs of the efficient and automated education agents in the web-based instruction are recognized. But many education systems that had been studied recently did not service fluently the courses which learners had been wanting and could not provide the way for the learners to study the learning weakness which is observed in the continuous feedback of the course. In this paper we propose "Design of Multi-agent System for Course Scheduling of Learner-oriented using Weakness Analysis Algorithm". First proposed system monitors learner's behaviors constantly, evaluates them, and calculates his accomplishment. From this accomplishment the multi-agent schedules the suitable course for the learner. And the learner achieves a active and complete learning from the repeated and suitable course.le course.

• Smart Media Journal
• /
• v.13 no.2
• /
• pp.68-84
• /
• 2024

This paper describes the development of a system and algorithms for high-quality welfare services by recognizing behavior development indicators (activity, sociability, danger) in children aged 0 to 2 years old using action recognition technology. Action recognition targeted 11 behaviors from lying down in 0-year-olds to jumping in 2-year-olds, using data directly obtained from actual videos provided for research purposes by three nurseries in the Gwangju and Jeonnam regions. A dataset of 1,867 actions from 425 clip videos was built for these 11 behaviors, achieving an average recognition accuracy of 97.4%. Additionally, for real-world application, the Edge Video Analyzer (EVA), a behavior analysis device, was developed and implemented with a region-specific random frame selection-based PoseC3D algorithm, capable of recognizing actions in real-time for up to 30 people in four-channel videos. The developed system was installed in three nurseries, tested by ten childcare teachers over a month, and evaluated through surveys, resulting in a perceived accuracy of 91 points and a service satisfaction score of 94 points.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.9
• /
• pp.444-452
• /
• 2024

This study proposes a deep learning architecture optimized for fire detection derived through Layer Importance Evaluation. In order to solve the problem of unnecessary complexity and operation of the existing Convolutional Neural Network (CNN)-based fire detection system, the operation of the inner layer of the model based on the weight and activation values was analyzed through the Layer Importance Evaluation technique, the layer with a high contribution to fire detection was identified, and the model was reconstructed only with the identified layer, and the performance indicators were compared and analyzed with the existing model. After learning the fire data using four transfer learning models: Xception, VGG19, ResNet, and EfficientNetB5, the Layer Importance Evaluation technique was applied to analyze the weight and activation value of each layer, and then a new model was constructed by selecting the top rank layers with the highest contribution. As a result of the study, it was confirmed that the implemented architecture maintains the same performance with parameters that are about 80% lighter than the existing model, and can contribute to increasing the efficiency of fire monitoring equipment by outputting the same performance in accuracy, loss, and confusion matrix indicators compared to conventional complex transfer learning models while having a learning speed of about 3 to 5 times faster.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.305-315
• /
• 2020

For geological disposal of radioactive wastes, a method was proposed to evaluate the radionuclide transport in the biosphere by calculating the elapsed time of nuclide migration. The radionuclides were supposed to be introduced from a natural barrier and reached a large surface water body following a groundwater flow in a shallow subsurface. The biosphere was defined as a shallow subsurface environment that included aquifers on a host rock. Using the proposed method, a calculation algorithm was established, and a computer code that implemented the algorithm was developed. The developed code was verified by comparing the simulation results of the simple cases with the results of the analytical solution and a public program, which has been widely used to evaluate the radiation dose using the radionuclide transport near the surface. A case study was constructed using the previous research for radionuclide transport from the hypothetical geological disposal repository. In the case study, the code calculated the mass discharge rate of radionuclide to a stream in the biosphere. Because the previous research only demonstrated the transport of radionuclides from the hypothetical repository to the host rock, the developed code in the present study could help identify the total transport of radionuclide along the complete pathway.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.275-281
• /
• 2004

Socket weldment used to change the flow direction of fluid nay have flaws such as lack of fusion and cracks. Liquid penetrant testing or Radiography testing have been applied as NDT methods for flaw detection of the socket weldment. But it is difficult to detect the flaw inside of the socket weldment with these methods. In order to inspect the flaws inside the socket weldment, a ultrasonic testing method is established and a ultrasonic transducer and automated ultrasonic testing system are developed for the inspection. The automated ultrasonic testing system is based on the portable personal computer and operated by the program based Windows 98 or 2000. The system has a pulser/receiver, 100MHz high speed A/D board, and basic functions of ultrasonic flaw detector using the program. For the automated testing, motion controller board of ISA interface type is developed to control the 4-axis scanner and a real time iC-scan image of the automated testing is displayed on the monitor. A flaws with the size of less than 1mm in depth are evaluated smaller than its actual site in the testing, but the flaws larger than 1mm appear larger than its actual size on the contrary. This tendency is shown to be increasing as the flaw size increases. h reliable and objective testing results are obtained with the developed system, so that it is expected that it can contribute to safety management and detection of repair position of pipe lines of nuclear power plants and chemical plants.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.85-108
• /
• 2013

This paper introduces a new qualitative measurement indicator, Relatively Rank-normalized Impact Factor ($R^2nIF$) that can overcome drawbacks of the existing research performance measures. With the help of this innovative indicator, this study analyzes and compares the quality of research papers across countries and National Science Indicators (NSI) standard academic fields. The development of an improved bibliometric indicator for evaluating the quality of research papers and disentangling the "international" dimension of research performance will be of interest to academics and practitioners alike.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.823-832
• /
• 2006

The Purpose of Similarity(Reproduction) Degree Appraisal is to determine the equality or similarity between two programs and it is a system that presents the technical grounds of judgment which is necessary to support the resolution of software intellectual property rights through expert eyes. The most important things in proceeding software appraisal are not to make too much of expert's own subjective judgment and to acquire the accurate-appraisal results. However, up to now standard research and development for its systematic techniques are not properly made out and as different expert as each one could approach in a thousand different ways, even the techniques for software appraisal types have not exactly been presented yet. Moreover, in the analyzing results of all the appraisal cases finished before, through a practical way, we blow that there are some damages on objectivity and accuracy in some parts of the appraisal results owing to the problems of existing appraisal procedures and techniques or lack of expert's professional knowledge. In this paper we present the model for the standardization of software-similarity-appraisal techniques and objective-evaluation methods for decreasing a tolerance that could make different results according to each expert in the same-evaluation points. Especially, it analyzes and evaluates the techniques from various points of view concerning the standard appraisal process, setting a range of appraisal, setting appraisal domains and items in detail, based on unit processes, setting the weight of each object to be appraised, and the degree of logical and physical similarity, based on effective solutions to practical problems of existing appraisal techniques and their objective and quantitative standardization. Consequently, we believe that the model for the standardization of software-similarity-appraisal techniques will minimizes the possibility of mistakes due to an expert's subjective judgment as well as it will offer a tool for improving objectivity and reliability of the appraisal results.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.73-78
• /
• 2016

The Installation, Maintence, and Safety Control of Fire-fighting Systems Act of South Korea regulates that over 30-storey high-rise buildings including underground spaces should vitally perform the Performance-based Design to minimize property damage and personal injury as a fire risk assessment in advance. Therefore a PBD designer such as a fire safety professional engineer evaluate occupant's life safety by a scientific methodology. In order to evaluate the life safety, fire safety designers calculate the Required Safety Egress Time (RSET) which does not have the legal criteria regarding the standard method of calculation yet. So this way has been showing different results depending upon the designer's choice, knowledges and experiences. In this study, RSET calculation methods by six designers respectively were analysed from the thirteen reports of real performance based design projects conducted in Busan for a last five years. In particular, the Response Time calculation methods which have the most powerful effect for figuring the RSET are compared with the other designer's to deduce an error value.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.19-30
• /
• 2007

Modeling 3D buildings is an essential process to revive the real world into a computer. There are two ways to create a 3D building model. The first method is to use the building layer of 1:1000 digital maps based on high density point data gained from airborne laser surveying. The second method is to use LiDAR point data with digital images achieved with LiDAR. In this research we tested one sheet area of 1:1000 digital map with both methods to process a 3D building model. We have developed a process, analyzed quantitatively and evaluated the efficiency, accuracy, and reality. The resulted differed depending on the buildings shape. The first method was effective on simple buildings, and the second method was effective on complicated buildings. Also, we evaluated the accuracy of the produced model. Comparing the 3D building based on LiDAR data and digital image with digital maps, the horizontal accuracy was within ${\pm}50cm$. From the above we derived a conclusion that 3D building modeling is more effective when it is based on LiDAR data and digital maps. Using produced 3D building modeling data, we will be utilized as digital contents in various fields like 3D GIS, U-City, telematics, navigation, virtual reality and games etc.