• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.542-553
• /
• 2006

Because Y and C signals in a composite video signal are piled one on another in the same frequency, it is impossible to separate them completely. Therefore, it is necessary to develop efficient separation technique in order to minimize degradation of video quality. In this paper, we propose wavelet-based 3D comb filter algorithm and architecture for separating Y and C signals from a composite video signal. The proposed algorithm uses wavelet transform and thresholding of compared lines for acquiring the maximum video quality. Simulation results show that the proposed algorithm has better image quality and better PSNR than previous algorithms. For real application of the proposed algorithm, we developed a hardware architecture and the architecture was implemented by using VHDL. Finally, a VLSI layout of the proposed architecture was generated by using 0.25 micrometer CMOS process.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.257-258
• /
• 2009

Nanocomposites of a epoxy resin are synthesized and evaluated the present study investigated. The effect of nanoclay additives on the properties of diglycidyl ether or bisphenol A(DGEBA) epoxy resin. DGEBA was mixed with 3~7 wt% organically modified layered silicate, Cloisite 30B for three hours. The average grain size of the specimens decreased with adding Cloisite 30B. The dielectric constant showed between 3.2 ~ 3.5 and the dielectric loss showed between 3.2 ~ 5.7 % in all specimens.

• Electrical & Electronic Materials
• /
• v.3 no.1
• /
• pp.9-19
• /
• 1990

본 연구에서는 산회물 혼합법, 솔-젤법, 공침법등의 세가지 방법으로 PbTiO$_{3}$분말을 제조하여 폴리머와 혼합 O-3 복합재료를 제작한 후, 하이드로폰으로의 응용을 위한 제 특성을 고찰하였다. 비유전상수는 PbTiO$_{3}$의 체적비 증가에 따라 지수함수적으로 증가하였으며 유전손실은 선형적으로 증가하였다. 수정입방체 모델로 부터 계산된 변형계수 n은 M-O, S-G, C-P의 경우 각각 0.724, 0.585, 0.483으로 나타났다. 압전 변형계수 d$_{33}$는 PbTiO$_{3}$의 체적비, 분극전장 및 분극 시간의 증가에 따라 증가하였으며 일정시간 경과후에는 포화값을 나타내었다.다.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.243-250
• /
• 2003

Poly(methyl methacrylate)/clay nanocomposite particles with particle size of 275${\sim}$292 nm range were successfully prepared using emulsion polymerization. The content of montmorillonite based on the methyl methacrylate monomer was chosen as 30 wt.%. 2,2-azobis(isobuthylamidine hydrochloride) and n-dodecyltrimethylammonium chloride were used as an initiator and a surfactant in cationic emulsion system. Potassium persulfate and sodium lauryl sulfate were used as an initiator and a surfactant in anionic emulsion system. The evidence of intercalated /exfoliated structure of montmorillonite in the nanocomposite prepared in our experiment was confirmed by wide angle x-ray diffraction patterns of $d_{001}$ plane. Thermal behavior of nanocomposite was traced using DSC and TGA. It was found that the nanocomposite particle prepared by cationic emulsion system showed intercalated structured. We also found that the nanocomposite particle obtained from anionic emulsion system resulted in the fully exfoliated structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.35-35
• /
• 2010

This paper illustrates the use of electric field computation to optimize the design of high voltage composite bushing. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1141-1142
• /
• 2015

실리콘 고무는 옥외용 폴리머 애자 또는 부싱 등에 주로 사용되고 있으며, 이에 대한 연구가 많이 진행되어 지고 있다. 최근에는 나노 기술이 발달함에 따라 전기 재료에 나노 사이즈의 필러를 첨가하여 재료의 특정 특성들을 향상시키는 연구들이 진행되어 지고 있다. 본 논문에서는 전기적인 성능을 향상시키고자 나노 사이즈의 $Al_2O_3$를 첨가한 상온 경화형 실리콘 고무에 대한 연구를 진행하였으며, DC 전계와 오염 상황 하에서 연면 파괴 강도를 측정하였으며, 접촉각과 표면 저향률을 측정하였다. 실험 결과, 필러 함량이 증가할수록 연면 절연 파괴 강도와 표면 저항률은 증가하였으며 접촉각은 감소하였다. 또한, 일정 함량 이상에서는 연면 절연 파괴 강도와 표면 저항율이 감소하는 것으로 나타났다.

• IE interfaces
• /
• v.19 no.3
• /
• pp.190-201
• /
• 2006

With the rapid growth in the demand and supply of web service, the search for superior services has become a prominent issue. Furthermore, much emphasis and attention are being placed on composite web services, where individual services are combined together to form a single workflow to satisfy the demand of the customers. In today's era of excessive expansion of web services, this study intends to propose the execution plan architecture for composite web services to accomplish the following three goals. The first goal is to derive a feasible plan which maximize user satisfaction for composite web services by implementing an execution plan architecture that reflects the Quality of Service criteria. Secondly, this study also aims at analyzing and selecting the indexes that adequately reflects its quality and its nonfunctional property. Finally, this study intends to apply the concept of constraint satisfaction problem and heuristics to reduce the execution duration of the process.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.26 no.1
• /
• pp.39-51
• /
• 2017

In order to solve the problem of repositioning the old hader bar attachment and to restore the non-esthetic facial profile and improper occlusion of the edentulous patient due to inadequate jaw relation, determination of vertical dimension of occlusion and tooth arrangement were performed similar to the natural teeth before the teeth loss. In addition to improving the esthetics by restoring the inadequate facial appearance, the composite resin was used to maximize the patient's secondary esthetic satisfaction with the denture.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.76-76
• /
• 2015

PVD에 의한 증착 대상 물질인 Ti, AlSi, Cr 및 각각의 타겟 전류, 바이어스, 압력 조건 들을 설계하여 적용시켰으며 PECVD와 CBC 코팅을 조합하여 발생되는 새로운 나노 멀티박막의 특성을 본 연구에서는 시험분석 및 평가하였다. 코팅층 깊이에 따른 조성 변화는 XPS를 이용하였으며 미세조직 및 표면 상태는 FE-SEM을 이용한 정밀 분석을 실시하였다. 또한, 박막의 경도는 나노인덴터를 이용하여 박막 자체의 경도만을 분석하였다. 한편, Pin-on-disk 방식의 마모시험기를 이용하여 표면조도와 상대재의 처리 상태에 따른 마찰계수를 시험 평가하였다.