• Title/Summary/Keyword: 컨테이너 처리량

Search Result 91, Processing Time 0.028 seconds

Analysis on the Marine Traffic Flow Characteristics for Gamcheon Harbor (감천항 입.출항에 관한 해상교통특성 분석)

  • Kim Jun-Hoon;Gug Seung-Gi
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2006.06b
    • /
    • pp.137-146
    • /
    • 2006
  • Gamcheon Harbor was developed as a multipurpose port to mix processing functions of exclusive piers for bulk cargo such as marine products. domestic cargo. Since the container terminal was opened in 1997. maximum $40,000{\sim}50,000$ DWT containership have been incoming and outgoing. However, because [he breakwater entrance in Gamcheon Harbor is narrow and the crossed passing of ship is ever-present at breakwater front, marine accident danger is high that grasping traffic characteristics is required in reply. Therefore marine traffic characteristics were analyzed for Gamcheon Harbor, included the track and traffic volumes of peak hours period in inbound/outbound and front sea area of the harbor in present.

  • PDF

항만배후단지 조성공사 설계사례 - 부산항 신항 남컨배후단지 축조공사를 중심으로

  • Go, Seong-Hun;Song, Sang-Jun
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.05a
    • /
    • pp.222-224
    • /
    • 2018
  • 국내 항만배후단지 중 최대 연약층 심도, 초연약 지반이 분포하는 부산신항 남컨테이너부두 항만배후단지 조성공사에 요구되는 지층분포 특성에 따른 연약지반개량의 표층처리 및 연직배수공법 등 제반사항을 유사사례, 시공성 및 경제성 등을 종합적으로 고려하여 제공하였다. 본 설계를 통해 연약지반개량 중 대심도 연직배수를 위한 PBD 타설 장비의 개량을 유도하였으며, 유지관리 및 대심도 연약지반에 따른 경제성을 고려한 허용잔류 침하량을 토지 용도별로 분류하여 제시하였다.

  • PDF

A Performance Analysis of Pulling Rate Based on Image Layer Concurrency Level in Docker Environment for Cold Start Mitigation (콜드 스타트 완화를 위한 도커 환경에서의 이미지 레이어 동시성 수준에 따른 풀링 속도 성능 분석)

  • Minwoo Kang;Donggyun Kim;Heonchang Yu;Jihun Kang
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2023.11a
    • /
    • pp.89-92
    • /
    • 2023
  • 최근에 Serverless 컴퓨팅은 많은 관심을 받는 기술로, 서버 프로비저닝 없이 코드를 배포하고 실행할 수 있으며 요청량에 따라 동적으로 컴퓨팅 리소스를 확장하여 애플리케이션을 안정적으로 운영할 수 있는 환경을 제공한다. Serverless 컴퓨팅의 주요 이슈 중 하나인 cold start 는 함수를 실행하기 위한 컨테이너 초기화 및 구동하는 단계이며, 해당 과정에서는 이미지 풀링이 수행될 수 있다. 이미지 풀링은 cold start 지연의 대부분을 차지하고 함수의 응답시간을 증가 시켜서 사용자 경험에 부정적인 영향을 줄 수 있다. 따라서, 본 논문에서는 cold start 지연을 줄이기 위해 도커를 활용해서 이미지 레이어 동시 풀링 개수를 조절함으로써 이미지 풀링 속도를 개선시킬 수 있는지 분석하였다. 이와 같은 분석을 통해 풀링 개수가 풀링 속도에 영향을 줄 수 있음을 확인하였다.

An Empirical Study on the Measurement of Clustering and Trend Analysis among the Asian Container Ports Using the Variable Group Benchmarking and Categorical Variable Models (가변 그룹 벤치마킹 모형과 범주형 변수모형을 이용한 아시아 컨테이너항만의 클러스터링측정 및 추세분석에 관한 실증적 연구)

  • Park, Rokyung
    • Journal of Korea Port Economic Association
    • /
    • v.29 no.1
    • /
    • pp.143-175
    • /
    • 2013
  • The purpose of this paper is to show the clustering trend by using the variable group benchmarking(VGB) and categorical variable(CV) models for 38 Asian ports during 9 years(2001-2009) with 4 inputs(birth length, depth, total area, and number of crane) and 1 output(container TEU). The main empirical results of this paper are as follows. First, clustering results by using VGB show that Shanghai, Qingdao, and Ningbo ports took the core role for clustering. Second, CV analysis focusing on the container throughputs indicated that Singapore, Keelong, Dubai, and Kaosiung ports except Chinese ports are appeared as the center ports of clustering. Third, Aqaba, Dubai, Hongkong, Shanghai, Guangzhou, and Ningbo ports are recommended as the efficient ports for the target of clustering. Fourth, when the ports are classified by the regional location, Dubai, Khor Fakkan, Shanghai, Hongkong, Keelong, Ningbo, and Singapore ports are the core ports for clustering. On the whole, other ports located in Asia should be clustered to Dubai, Khor Fakkan, Shanghai, Hongkong, Ningbo, and Singapore ports. The policy implication of this paper is that Korean port policy planner should introduce the VGB model, and CV model for clustering among the international ports for enhancing the efficiency of inputs and outputs.

Estimation of the CY Area Required for Each Container Handling System in Mokpo New Port (목표 신항만의 터미널 운영시스템에 따른 CY 소요면적 산정에 관한 연구)

  • Keum, J.S.
    • Journal of Korean Port Research
    • /
    • v.12 no.1
    • /
    • pp.35-46
    • /
    • 1998
  • The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

  • PDF

Development Strategy of Seosan-Daesan Port using AHP Analysis (AHP를 이용한 서산 대산항의 발전전략에 관한 연구)

  • Yun, Kyong-Jun;Ahn, Seung-Bum;Lee, Hyang-sook
    • Journal of Korea Port Economic Association
    • /
    • v.34 no.4
    • /
    • pp.39-52
    • /
    • 2018
  • The Seosan-Daesan Port is a representative trade port in Chungnam, and has the sixth largest total cargo throughput and the third largest oil cargo throughput in Korea. However, research on this port's development is lacking relative to that for Busan Port, Incheon Port, and Gwangyang Port, and no study exists that suggests the direction of the development strategy for Seosan-Daesan Port. This study discusses the future role of Seosan-Daesan Port in preparation for a rapidly changing future and the development strategy that should be established. Using the AHP, a development strategy is provided for Seosan-Daesan Port from short/mid-term and long-term viewpoints for three aspects: operation activation, infrastructure construction, and policy support. Operation activation is chosen as the most significant factor from a short/mid-term viewpoint, whereas infrastructure construction is recognized as important from a long-term viewpoint. Specifically, from a short/mid-term viewpoint, sustainable container cargo attraction, multipurpose dock construction, management pier construction, and opening of international passenger ferry lines are important factors while from the long-term viewpoint, hinterland construction, petrochemical industry cluster construction, automobile industry cluster construction, and management improvement system are important. Establishing action plans for each strategy and a cooperative network for sharing goals and strengthening cooperation is necessary.

Quality evaluations of bell pepper in cold system combined with TEM (thermoelectric materials) and PCM (phase change material) (PCM을 장착한 열전소자 냉각시스템의 저장 중 피망의 품질 평가)

  • Sung, Jung-Min;Kim, So-Hee;Kim, Byeong-Sam;Kim, Jong-Hoon;Kim, Ji-Young;Kwon, Ki-Hyun
    • Food Science and Preservation
    • /
    • v.23 no.4
    • /
    • pp.471-478
    • /
    • 2016
  • For the distribution of fresh produce, the thermoelectric cooling system combined with thermo electric materials (TEM) and phase change material (PCM) was studied. The PCM used this study was produced by in-situ polymerization technology which referred microencapsulation of hydrocarbon (n-tetradecane and n-hexadecane). In this study, quality characteristics of bell peppers in thermoelectric cooling system combined with TEM and PCM were analyzed and control was placed in an EPS (expanded polystyrene) box. As a result of quality characteristics analysis, weight of bell peppers decreased and moisture content of bell peppers was 90.96~94.43% during storage. Vitamin C content of bell pepper decreased during storage and reduction ratio of control was higher than that of BPT-5 treatment(bell pepper in thermoelectric cooling system with PCM which is kept the temperature at $5^{\circ}C$). The result of color value, on 21 day, ${\Delta}E$ value of BPT-5 treatment was 5.05 while that of control was 41.8. On 21 day, total bacteria count of BPT-5 treated bell pepper shown less than that of control. In conclusion, it suggested that the thermoelectric cooling system combined with PCM improved quality of fresh produce during transportation and storage.

Research SW Development Integrated Framework to Support AI Model Research Environments (인공지능 모델 연구 환경 지원을 위한 연구소프트웨어 개발 통합 프레임워크)

  • Minhee Cho;Dasol Kim;Sa-kwang Song;Sang-Baek Lee;Mikyoung Lee;Hyung-Jun Yim
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2023.11a
    • /
    • pp.97-99
    • /
    • 2023
  • 소프트웨어를 개발하거나 실행하는 환경은 매우 다양하다. 최근에 혁신을 이끌고 있는 인공지능 모델은 오픈소스 프로젝트룰 통해 공개되는 코드나 라이브러리를 활용하여 구현하는 경우가 많다. 하지만 실행을 위한 환경 설치 과정이 쉽지 않고, 데이터 혹은 기학습된 모델 사이즈가 대용량일 경우에는 로컬 컴퓨터에서 실행하는 것이 불가능한 경우도 발생하고, 동료와 작업을 공유하거나 수동 배포의 어려움 등 다양한 문제에 직면한다. 이러한 문제를 해결하기 위하여, 소프트웨어가 유연하게 동작할 수 있도록 효율적인 리소스를 관리할 수 있는 컨테이너 기술을 많이 활용한다. 이 기술을 활용하는 이유는 AI 모델이 시스템에 관계없이 정확히 동일하게 재현될 수 있도록 하기 위함이다. 본 연구에서는 인공지능 모델 개발과 관련하여 코드가 실행되는 환경을 편리하게 관리하기 위하여 소프트웨어를 컨테이너화하여 배포할 수 있는 기능을 제공하는 연구소프트웨어 개발 통합 프레임워크를 제안한다.

A Study on Containerports Clustering Using Artificial Neural Network(Multilayer Perceptron and Radial Basis Function), Social Network, and Tabu Search Models with Empirical Verification of Clustering Using the Second Stage(Type IV) Cross-Efficiency Matrix Clustering Model (인공신경망모형(다층퍼셉트론, 방사형기저함수), 사회연결망모형, 타부서치모형을 이용한 컨테이너항만의 클러스터링 측정 및 2단계(Type IV) 교차효율성 메트릭스 군집모형을 이용한 실증적 검증에 관한 연구)

  • Park, Ro-Kyung
    • Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
    • /
    • v.9 no.6
    • /
    • pp.757-772
    • /
    • 2019
  • The purpose of this paper is to measure the clustering change and analyze empirical results, and choose the clustering ports for Busan, Incheon, and Gwangyang ports by using Artificial Neural Network, Social Network, and Tabu Search models on 38 Asian container ports over the period 2007-2016. The models consider number of cranes, depth, birth length, and total area as inputs and container throughput as output. Followings are the main empirical results. First, the variables ranking order which affects the clustering according to artificial neural network are TEU, birth length, depth, total area, and number of cranes. Second, social network analysis shows the same clustering in the benevolent and aggressive models. Third, the efficiency of domestic ports are worsened after clustering using social network analysis and tabu search models. Forth, social network and tabu search models can increase the efficiency by 37% compared to that of the general CCR model. Fifth, according to the social network analysis and tabu search models, 3 Korean ports could be clustered with Asian ports like Busan Port(Kobe, Osaka, Port Klang, Tanjung Pelepas, and Manila), Incheon Port(Shahid Rajaee, and Gwangyang), and Gwangyang Port(Aqaba, Port Sulatan Qaboos, Dammam, Khor Fakkan, and Incheon). Korean seaport authority should introduce port improvement plans by using the methods used in this paper.

Assessing Greenhouse and Noxious Gas Emissions from Stevedoring Work at the Port of Incheon (인천항 육상하역 작업에 따른 온실가스 및 유해가스 발생 추정)

  • Roh, Younghoon;Chang, Young-Tae
    • Journal of Korea Port Economic Association
    • /
    • v.31 no.4
    • /
    • pp.133-150
    • /
    • 2015
  • This study estimates greenhouse and noxious gas emissions caused by cargo-handling equipment at the Port of Incheon in 2013 by applying the NONROAD Model (U.S. EPA). The port emitted 838.4 tons of NOx and 82,747 tons of CO2. The estimates are 2.4 times higher for NOx and 1.3 times higher for CO2 than those of the Port of Los Angeles. Emissions from general cargo-handling equipment are five times more than those from container cargo-handling equipment. Among the three ports comprising the Port of Incheon, the emissions at the North Port, which handles raw materials for industry are relatively higher than those at the other ports. Compared to the study conducted by Chang et al. (2013, 2014), this study finds that CO2 and NOx emissions per cargo-handling equipment are 10 times higher than the corresponding amounts per ship.