• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.432-441
• /
• 2012

In this study, the transfer rate of wild type Listeria mon, ytogenes (LM) was investigated to establish the standard of safety management during pork meat pr, essing for meat to meat and meat to food contact surfaces contamination at 5 and $10^{\circ}C$. The transfer rate of LM from meat to meat during the pr, essing increased from 0.02% after 30 min to 0.42% after 120 min at $5^{\circ}C$, while for conveyor belt and stainless steel, it decreased from 0.015% and 0.013% after 30 min to 0.002% and 0.0003% after 120 min at $5^{\circ}C$, respectively (p < 0.05). When temperature increased to $10^{\circ}C$, the transfer rates of LM from meat to meat, conveyor belt and stainless steel were the highest at 60 min exposure, and all decreased after 120 min. In reverse, the transfer rate from food contact surface to pork meat was significantly higher than that from pork meat to food contact surface (p < 0.01). Also, the transfer rate to conveyor belt was significantly higher than stainless steel (p < 0.05) and it was highest at 30 min exposure time in both 5 and $10^{\circ}C$. This study indicates that the transfer and adherence rates of LM are influenced by the contact time and temperature. Consequently, these results were utilized to develop a predictive model with a high level of confidence which can lead to prevent cross-contamination during pork meat processing.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.87-87
• /
• 2012

아라미드 레노직물은 컨베이어벨트, 건조벨트, 스크림직물, 전자산업용 이송체 등 여러 산업분야에 사용되고 있다. 레노는 2D 구조의 메쉬 형태 직물이고 치수안정성이 낮다. 그렇기 때문에 치수안정성을 부여할 수 있는 후가공이 필요하며, 현재는 치수안정성을 부여하고 여러 물성보완과 내수성을 향상시키기 위해 PTFE(Polytetrafluoroethylene) 코팅을 하고 있다. 우리는 이러한 PTFE코팅의 영향을 분석하기 위해 강도, 탄성률, 열팽창계수, 내산성 등을 분석하였고, 그 결과 강도와 탄성률, 열팽창계수, 내산성 등이 PTFE 코팅에 의해 향상된 것을 알 수 있었다. 이는 PTFE 코팅에 의해 형태안정성이 향상되었고, 동시에 열적 안정성이 향상되었기 때문인 것으로 판단된다.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.915-924
• /
• 2002

Conventional Systems for parcel sorting consist of two sequences as loading the parcel into conveyor belt system and post-code input. Using bar code information, the parcels to be recorded and managed are recognized. This paper describes a 32 $\times$ 32 sized mini-block inspection to extract bar code Region of Interest (ROI) from the line Charged Coupled Device (CCD) camera capturing image of moving parcel at 2m/sec speed. Firstly, the Min-Max distribution of the mini-block has been applied to discard the background of parcel and region of conveying belts from the image. Secondly, the diagonal inspection has been used for the extraction of letters and bar code region. Five horizontal line scanning detects the number of edges and sizes and ROI has been acquired from the detection. The wrong detected area has been deleted by the comparison of group size from labeling processes. To correct excluded bar code region in mini-block processes and for analysis of bar code information, the extracted ROI 8 boundary points and decline distribution have been used with central axis line adjustment. The ROI extraction and central axis creation have become enable within 60～80msec, and the accuracy has been accomplished over 99.44 percentage.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.93-97
• /
• 2018

In this paper, it proposes a method that uses an air pump to inject oxygen to water directly to prevent the growth of algae and cyanobacterium using MCU(Micro Controller Unit). MCU can control itself with modules of GPS, a sonic sensor, camera, conveyer belt and water pump to remove and prevent growths of algae. It can also be connected to the smart phone application software to track the system where it is and it can be controlled by the user interfaced with the smart phone application.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.33-41
• /
• 2006

This paper presents a method that automatically recognizes products into model type, which it flows with the conveyor belt. The specific interlaced image are occurred by moving image when we use the NTSC based camera. It is impossible to process interlaced images, so a suitable post-processing is required. For the purpose of this processing, after it remove interlaced images using de-interlacing method, it leads rectangle region of object by thresholding. And then, after rectangle region is separated into several blocks through edge detection, we calculate pixel numbers per each block, re-classify using its average, and classify products into model type. Through experiments, we know that the proposed method represent high classification ratio.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.340-347
• /
• 1999

Recently, the progress of industrialization has been taken concern of material handling automation. So far, the conveyor belt has been popular for material handling. However, this system has many disadvantages such as the space, cost, In this paper, a new navigation algorithm using fuzzy is introduced. The mobile robot follows a line installed on the roads. These informations are inputted with three approximate sensors. These obtained informations are analyzed with fuzzy technique for autonomous steering. Therefore, unlike existing systems, high reliability is guaranteed under bad environment conditions. The installation and maintenance of a line is easily made at lower cost. The use of the mobile robot can be extended to materials handing purposes in manufacturing, hospital, inter-of fire documents deliveries.

• Clinics in Shoulder and Elbow
• /
• v.11 no.1
• /
• pp.66-69
• /
• 2008

Traumatic forequarter amputation is an extremely rare and life-threatening injury. It is caused by blunt trauma or tremendous traction force, and the prognosis is very poor because of the involvement of massive associated injury. Traumatic forequarter amputation has been rarely reported in the English language clinical literature, but has never been reported in Korea. We report a case of traumatic forequarter amputation caused by a conveyor belt that was treated with emergency resuscitation and surgery, with an accompanying review of the literature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.512-513
• /
• 2017

In this paper, an automatic sowing system which arranges the seeds gathered using inhaling technique, on the upper part of cells in trays, is developed to improve the sowing efficiency. In the system, the seeds in inhaled into the vacuum drum, then the seeds are exhausted and arranged on the rotating tray, resulting in rapid sowing system. Also, the velocity control algorithm for the conveyor belt transporting tray is developed to compensate the velocity error generated while the belt is carrying the tray. The velocity control algorithm controls the pulses applying to the stepper motor rotating the drum.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1103-1106
• /
• 2002

현재, 컨베이어 벨트시스템에 소포를 직재하고, 우편번호를 운영자가 입력하여 구분한다. 구분된 소포 중에서 기록관리 대상의 경우에는 바코드를 판독하여 처리하고 있다. 이에 따라, 본 논문에서는 2m/sec 이내로 이송되는 소포를 라인 CCD(Charged Coupled Device) 카메라에 의해 이미지 획득한 후, 바코드 ROI 추출 방법을 위해 $32{\times}32$ 미세블룩 검사 방법을 적용하였다. ROI 추출 절차는 최대-최소 차이값과 동적 인계값 기준으로 바탕면 제거, 문자열과 바코드 영역을 판단하기 위한 대각선(diagonal) 검사방법 적용, 바코드 영역인지 검증하기 위해 수평으로 5 라인을 검사하고 에지의 수와 폭의 변화량 비교 등의 과정으로 수행하였다. 그리고 바코드 ROI 추출은 레이블링 과정에 의해 바코드 영역의 보정과 그룹크기 비교에 의한 ROI 영역의 구체화와 정보 해석을 위하여 ROI 외곽좌표 8개중에서 가장 간 중심축 라인으로 생성하는 방법 등을 적용하였다. ROI 추출과 중심축 시험결과에 의하면 $50{\sim}180msec$이내에 가능하게 되었다. 그리고, ROI 추출의 정확도는 99.994% 이상을 만족한다.

• Particle and aerosol research
• /
• v.19 no.2
• /
• pp.43-53
• /
• 2023

In this study, the ventilation system of the enclosed conveyor belt for coal transportation was evaluated, and the particle removal efficiency according to the ventilation conditions was identified using computational fluid dynamics and particle behavior analysis. The most effective way to remove dust generated inside the closed conveyor belt is to adjust the position of the exhaust port of the duct so that the air is exhausted around the rear of the conveyor belt. And this method seems to work for another narrow and long spaces where air enters in one direction. In addition, when the air flow rate of the each duct was less than 300 CMM, it was efficient to increase the flow rate of the duct located at the rear of the conveyor belt, and when the flow rate of the each duct was higher than 300 CMM, it was efficient to increase the flow rate of the duct located at the front of the conveyor belt.