• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.447-453
• /
• 2001

In this paper, we consider the scheduling of SE(switching element)-disjoint multicasting in photonic Banyan-type switching networks constructed with directional couplers. This ensures that at most, one connection holds each SE in a given time thus, neither crosstalk nor blocking will arise in the network. Such multicasting usually takes several routing rounds hence, it is desirable to keep the number of rounds(i.e., scheduling length) to a minimum. We first present the necessary and sufficient condition for connections to pass through a common SE(i.e., make crosstalk) in the photonic Banyan-type networks capable of supporting one-to-many connections. With definition of uniquely splitting a multicast connection into distinct subconnections, the crosstalk relationship of a set of connections is represented by a graph model. In order to analyze the worst case crosstalk we characterize the upper bound on the degree of the graph. The successor paper(Part II)[14] is devoted to the scheduling algorithm and the upper bound on the scheduling length. Comparison with related results is made in detail.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.1-11
• /
• 2021

Recently, in Korea, the risk of meteorological disasters is increasing due to climate change, and the damage caused by rainfall is being emphasized continuously. Although the current weather forecast provides quantitative rainfall, there are several difficulties in predicting the extent of damage. Therefore, in order to understand the impact of damage, the threshold rainfall for each watershed is required. The damage caused by rainfall occurs differently by region, and there are limitations in the analysis considering the characteristic factors of each watershed. In addition, whenever rainfall comes, the analysis of rainfall-runoff through the hydrological model consumes a lot of time and is often analyzed using only simple rainfall data. This study used GIS data and calculated the threshold rainfall from the threshold runoff causing flooding by coupling two hydrologic models. The calculation result was verified by comparing it with the actual case, and it was analyzed that damage occurred in the dangerous area in general. In the future, through this study, it will be possible to prepare for flood risk areas in advance, and it is expected that the accuracy will increase if machine learning analysis methods are added.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.149-154
• /
• 2007

Nanoimprint lithography (NIL) is useful technique because of its low cost and high throughput capability for the fabrication of sub-micrometer patterns which has potential applications in micro-optics, magnetic memory devices, bio sensors, and photonic crystals. Usually, a chemical surface treatment of the stamp is needed to ensure a clean release after imprinting and to protect the expensive original master against contamination. Meanwhile, adhesion promoter between resin and substrate is also important in the nanoscale pattern. In this work, we have investigated the effect of surface treatment using silane coupling agent as release layer and adhesion promoter for UV-Nanoimprint lithography. Uniform SAM (self-assembled monolayer) could be fabricated by vapor deposition method. Vapor phase process eliminates the use of organic solvents and greatly simplifies the handling of the sample. It was also proven that 3-acryloxypropyl methyl dichlorosilane (APMDS) could strongly improve the adhesion force between resin and substrate compared with common planarization layer such as DUV-30J or oxygen plasma treatment.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.474-478
• /
• 2019

In this paper, we analyze the degradation of receiving sensitivity due to the coupling between digital noise and mobile handset antenna using characteristic mode. First, we analyze the coupling mechanism between the antenna and digital noise, and analyze the role of the decoupling capacitor of the ground signal line, which is one of the ways to improve the antenna receiving sensitivity degradation due to camera noise. For the analysis, the digital signal line and the ground line of the FPCB of the camera module are modeled as a loop type feeder that excites the characteristic mode of the PCB ground, and improved model which has a ground line with a capacitor are analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.336-336
• /
• 2020

기후변화와 기상이변으로 전 세계적으로 태풍 및 국지성 집중호우가 급증하고 있으며, 그로 인한 홍수피해와 2차 피해 발생이 증가하고 있어 이에 대한 정량적인 분석이 필요하다. 또한 서울 우면산, 춘천 마적산, 삼척 신남마을 등 토석류로 인한 피해가 증가하여 많은 인명피해와 재산피해가 발생하고 있다. 본 연구에서는 특정지역에서 강우량이 유출량에 미치는 영향을 분석하여 강우로 인해 발생하는 2차 피해인 토석류로 인한 피해를 분석하고자 하였다. 2019년 10월 토석류 피해가 있었던 삼척시 신남마을을 분석지역으로 설정하였으며, 분석에 이용된 강우사상은 실제로 피해를 일으켰던 태풍 '미탁' 사상과 기상청이 제공하는 정량적 예측강우(QPF)를 머신러닝의 XGBoost 기법을 적용하여 개발한 정량적 수문 예측 강우(HQPF)를 이용하였다. 강우-유출모형(S-RAT)으로 강우사상에 따른 유출량과 첨두유출량을 산정하였고, 모델 커플링 기법으로 2차원 토석류 수치모형(RAMMS)을 통해 토석류의 피해규모를 비교 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.186-186
• /
• 2010

소자의 축소화에 따라 floating gate 형의 flash 메모리 소자는 얇은 게이트 절연막 등의 이유로, 이웃 셀 간의 커플링 및 게이트 누설 전류와 같은 문제점을 지니고 있다. 이러한 문제점을 극복하기 위해 charge trap flash 메모리 (CTF) 소자가 연구되고 있지만, CTF 메모리 소자는 쓰기/지우기 속도와 데이터 보존 성능간의 trade-off 관계와 같은 문제점을 지니고 있다. 최근, 이를 극복하기 위한 방안으로, 다른 유전율을 갖는 유전체들을 적층시킨 터널 절연막을 이용한 Tunnel Barrier Engineered (TBE) 기술이 주목 받고 있다. 따라서, 본 논문에서는 TBE 기술을 적용한 MIS-capacitor를 높은 유전율을 가지는 Al2O3와 HfO2를 이용하여 제작하였다. 이를 위해 먼저 Si 기판 위에 Al2O3 /HfO2 /Al2O3 (AHA)를 Atomic Layer Deposition (ALD) 방법으로 약 2/1/3 nm의 두께를 가지도록 증착 하였고, Aluminum을 150 nm 증착 하여 게이트 전극으로 이용하였다. Capacitance-Voltage와 Current-Voltage 특성을 측정, 분석함으로써, AHA 구조를 가지는 터널 절연막의 전기적인 특성을 확인 하였다. 또한, high-k 물질을 이용한 터널 절연막을 급속 열처리 공정 (Rapid Thermal Annealing-RTA) 과 H2/N2분위기에서 후속열처리 공정 (Post-RTA)을 통하여 전기적인 특성을 개선 시켰다. 적층된 터널 절연막은 열처리를 통해 터널링 전류의 민감도의 향상과 함께 누설전류가 감소됨으로서 우수한 전기적인 특성이 나타남을 확인하였으며, 적층된 터널 절연막 구조와 적절한 열처리를 이용하여 빠른 쓰기/지우기 속도와 전기적인 특성이 향상된 비휘발성 메모리 소자를 기대할 수 있다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.267-271
• /
• 2013

A new structure of double-resonant cylindrical monopole is proposed for multiple band applications. Multiple band property for the proposed antenna is achieved by adjusting the coupling structure of the antenna base for a double resonance. Measured results of the proposed antenna are compared with those of wire and thick cylinder monopoles.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.137-138
• /
• 2012

In this paper, three-port flyback inverter with Active Power Decoupling(APD) circuit is analyzed. Conventional flyback inverter with passive power decoupling circuit needs the electrolytic capacitor with large capacitance for decoupling between constant DC power and instantaneous AC power. However the electrolytic capacitor has low lifespan about 50000 to 100000 hours. So the active power decoupling techniques are applied to reduce input capacitance of flyback inverter. Thus the overall system can achieve smaller size and longer lifespan. Proposed three-port flyback inverter is verified by design optimization, simulation and experimental result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1894-1899
• /
• 2000

The Roadway caused through Power Train engine vibration and bad ride comfort. It is very important to analyze the vibratory characteristics. The mathematical models on the Power Train, which is composed of engine-/transmission block, universal joint shaft, differential, rear axle arm and wheels, are developed and is verified by the experiments. This Paper describes the coupling influence occurred through a complete drive system for the power train. Dies study is carried out computationally with a calculation program and experimentally with the aid of the mode analysis.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.926-927
• /
• 2015

인터리브드 부스터 컨버터는 주로 대용량 정격에 사용되며, 출력전류 리플저감으로 인한 커패시터 수명증가, EMI 감소 등의 장점이 있다. 하지만 모듈의 사이즈가 커지며, 회로 내에 존재하는 소자들의 임피던스 성분들의 비대칭으로 각 상의 전류 불평형 문제가 발생할 수 있다. 본 논문에서는 입력 저전압 대전류 사양의 부스터 컨버터 시제품을 제작하여 기존의 인터리브드 부스터 컨버터와의 비교 분석을 통해 각 상의 전류 불평형 및 사이즈 문제 등을 개선한다.