• Annual Conference of KIPS
• /
• 2022.11a
• /
• pp.791-793
• /
• 2022

1인 가구의 증가로 셀프 인테리어의 관심이 높아지자 온라인 구매로 인테리어를 하는 경우가 많다. 그러나 가구를 주문해도 비율적이나 시각적으로 달라 환불하는 경우가 많다. 본 연구에서는 Unity의 AR, VR기술을 활용하여 가구 배치, 거리 측정, 벽지 변환 등의 기능으로 손쉽게 인테리어를 할 수 있고, 자신의 인테리어를 다른 사용자와 공유해 평가 및 비교를 할 수 있는 플랫폼 앱을 구현하여, 인테리어를 손쉽게 할 수 있는 서비스를 제공하고자 한다.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.709-711
• /
• 2023

안전관리를 위한 인공지능 기술은 꾸준히 연구되고 있는 분야다. 특히, 컴퓨터 비전 기술을 활용한 CCTV 영상 분석은 군중의 동선과 밀도를 파악하는데 유용하며, 대규모 실내 공간에서 체계적인 안전관리를 가능하게 한다. 그러나 기존의 CCTV 카메라를 사용한 군중 수 추정은 가려짐(occlusion)과 같은 한계가 있다. 본 논문은 무선 랜 신호 데이터 분석 기법을 활용하여 수집한 데이터를 활용하여 실내 환경에서 군중 수를 추정하고자 한다. 본 논문에서는 인원 수 분류 예측을 위해 셰이플릿 확장 변환(Random Dilated Shapelet Transform) 기법을 제안한다. 단일 데이터 세트 내 분류 결과와, TX, RX 배치 방식에 따른 분류 성능의 차이는 모델의 성능 부족보다 데이터의 특성을 고려한 새로운 접근 방법의 필요성을 알려준다.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.111-112
• /
• 2023

학교, 대형 쇼핑몰, 공항 등과 같은 큰 실내 공간에서는 군중의 동선과 밀도를 파악하고 관리하는 것은 안전사고와 연관되어 있어 매우 중요하다. 와이파이 센싱은 기존에 존재하던 CCTV 카메라나 센서를 활용한 혼잡도 관리보다 효율적이고 정확한 방식으로 추정하는 데 도움이 되며, 설치 및 유지보수 측면에서도 효율적이다. 본 논문에서는 실내 환경에서 군중 수를 추정하기 위해 딥 러닝을 이용한 무선랜 신호 분석 기법을 제안한다. 송수신기가 같은 공간에 위치했던 기존 연구들과는 달리 본 논문에서는 송신기와 수신기가 서로 다른 공간에 배치된 환경에서도 무선랜 수신 신호를 통해 다른 공간의 군중 수를 정확히 예측할 수 있다는 것을 실험으로 검증하였다.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.5 no.2
• /
• pp.26-31
• /
• 2014

This invention is purposed to provide an innovative solution for the inside of roof structures, which is cultural assets. The Asian old houses generally have several layered roofs on top of the structures. If a fire has started inside of the roof, it is hard to be extinguished before eliminating all the upper layers of the roof. This invention provides pre constructed embedded pipes, which is flammable and easy to be dissolved by the fire. The material of pipe is composed of rubbers, of which the combustion point is so low that the extinguishing of initial fire is possible without additional fire service. The inside of pipe is filled with halon gas. If the filled gas is consumed after ignited by fire, additional fire extinguishing water is supplied. If the flexible pipes are totally combusted by a big fire, the sprinkler at the end of inflexible pipe will work continuously, which is located between flexible and inflexible pipes. The extinguishing pipe network is suggested as dividing whole roof as multiple sections for a swift fire extinguishing in case of intentional or natural fire attack to our invaluable cultural assets.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.163-171
• /
• 2014

Based on the GPS/IMU integration, the car navigation has unstable conditions as well as drastically reduces accuracies in urban region. Nowadays, many cars mounted the camera to record driving states. If the ground coordinates of street furniture are known, the position and attitude of camera can be determined through SPR(Single Photo Resection). Therefore, an estimated position and attitude from SPR can be applied measurements in Kalman filter for updating errors of navigation solutions from GPS/IMU integration. In this study, the GPS/IMU/SPR integration algorithm was developed in loosely coupled modes through extended Kalman filters. Also, in order to analyze performances of GPS/IMU/SPR, simulation tests were conducted in GPS signal reception environments and the GCPs (Ground Control Points) distributions. In fact, the position and attitude gathered from GPS/IMU/SPR integration are more precise than the position and attitude from GPS/IMU integration. When IPs (image points), corresponded to GCPs, were concentrated in the center of image, the position error in the optical axis respectively increased. To understand effects from SPR, we plan to carry additional test on the magnitude of GCP, IP and initial exterior orientation errors.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.7-17
• /
• 2022

This study investigates the effect of cylindrical baffle arrays behind a rigid barrier on debris flow behavior and dynamic impact load. Small-scale tests were performed with various transverse blockage ratios and row numbers of baffles. High-speed cameras were installed at the flume's top and side, and load cells were installed in front of the rigid barrier. Moreover, glass beads simulated large boulders with debris flow in the flume. Test results revealed that the impact load of debris flow on the rigid barrier was significantly reduced using the cylindrical baffles behind the rigid barrier. In addition, the increased transverse blockage ratio of baffle arrays led to a greater impact load of debris flow because of flow suppression due to the baffle arrays.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.677-686
• /
• 2023

In this paper, we study the design and implementation of a smart home outing care system that recognizes the user's purpose of going out and delivers useful information that can help when going out. RSS service data of the Korea Meteorological Administration can be transmitted in real time using ESP8266, and a system that can provide weather information to users after analyzing the data using Arduino MEGA is implemented. Using App Inventor, you can pack the necessary items without forgetting, and you can change the settings according to the desired weather and purpose. The position of the microphone was placed outside to increase awareness by 12%, and the sensitivity of the pressure sensor was set to a maximum of 210 kΩ. If there is an obstacle between the doors, the doors open automatically. An ultrasonic sensor was placed on the ceiling of the drawer to recognize an object within the range of 0.5cm to 10cm to check the existence of an object, and a camera was installed to research a security reinforcement system.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.329-336
• /
• 2017

In video compression, Motion Estimation(ME) limits the performance of image quality and generated bit rates. However, it requires much complexity in the encoder part. Multi-view video uses many cameras at different positions. Multi-view video coding needs huge computational complexity in proportion to the number of the cameras. To reduce computational complexity and maintain the image quality, an effective motion estimation method is proposed in this paper. The proposed method exploiting the characteristics of motion vector distribution and the motion of video. The proposed is a kind of a hierarchical search strategy. This strategy consists of multi-grid rhombus pattern, diagonal pattern, rectangle pattern, and refinement pattern. Experiment results show that the complexity reduction of the proposed method over TZ search method and PBS (Pel Block Search) on JMVC (Joint Multiview Video Coding) can be up to 40~75% and 98% respectively while maintaining similar video image quality and generated bit rates.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.1-9
• /
• 2010

Recently, 3D stereoscopic display such as 3D stereoscopic cinemas and 3D stereoscopic TV is getting a lot of interest. In general, a stereo image can be used in 3D stereoscopic display. In other hands, for 3D auto stereoscopic display, the elemental images should be generated through visualization from every camera in a lens array. Since a lens array consists of several cameras, it takes a lot of time to generate the elemental images with respect to 3D virtual space, specially, if a large bio-medical volume data is in the 3D virtual space, it will take more time. In order to improve the problem, in this paper, we construct an octree for a given bio-medical volume data and then propose a method to generate the elemental images through efficient rendering of the Octree data using GPU. Experimental results show that the proposed method can obtain more improvement comparable than conventional one, but the development of more efficient method is required.