• Title/Summary/Keyword: 침투정

Search Result 298, Processing Time 0.035 seconds

The Formation of Transient Saturation Zone and the Subsurface flow on the Steep Hillslope by Rains (降雨에 의한 急斜面의 일시적인 飽和帶形成과 중간류 流出)

  • An, Jung-Gi
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.2
    • /
    • pp.167-176
    • /
    • 1998
  • On steep hillslopes, saturation zone formations and subsurface flows were monitored through the observation systems of observation wells, tensiometers and trenches. By the 103 mm rain which had fallen on the hillslope with dry soil moisture, the saturation zone began to be formed at the top of hillslope during the rain and developed to be formed within a few hours after the end of rain on all hillslope. Subsurface water outflowed mainly from the soil profile of 0-40 cm depth, but did not outflow from the one of 40-80 cm depth. This saturation zone seemed to be formed by partially saturation of soil. This resulted for two reasons. Firstly, the saturation zone was formed by a smaller amount of rain than that required. Secondly the soil at a certain depth below the water table was unsaturated. Saturation zones formed by pre-rains responded rapidly to rains and subsurface water outflowed mainly from the soil profile of 40-80 cm depth simultaneously with the rising of the water level. The rates of subsurface discharge from the soil profile of 40-80 cm depth to the precipitation were related to the antecedent precipitation although the maximum water levels of saturation zone formed by four rains were similar.

  • PDF

고밀도 알루미늄 박막 코팅과 특성 분석

  • Yang, Ji-Hun;Jeong, Jae-In;Jang, Seung-Hyeon;Park, Hye-Seon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.45-45
    • /
    • 2011
  • 알루미늄과 그 합금은 내부식성(corrosion resistance)이 좋고, 밀도가 낮아 높은 연료소비 효율을 필요로 하는 항공기와 자동차 같은 운송수단의 내-외장 소재로 사용되고 있다. 또한 알루미늄의 높은 내부식성을 이용하여 철강소재의 부식을 방지하는 보호막으로도 폭 넓게 사용된다. 물리기상증착(physical vapor deposition)으로 알루미늄을 코팅하면 박막 성장 초기단계에서 핵(nucleus)을 형성하고, 형성된 핵을 중심으로 주상 구조(columnar structure)로 박막이 성장하는 것이 일반적으로 알려진 방식이다. 주상 구조의 알루미늄 박막은 주상정과 주상정 사이에 필연적으로 공극(pore)이 존재하게 되어 부식을 일으키는 물질이 박막으로 침투하게 되고, 부식 물질과 모재가 반응하여 공식(pitting corrosion)이 발생한다. 본 연구에서는 스퍼터링(magnetron sputtering)을 이용하여 치밀한 조직을 갖는 알루미늄 박막을 코팅할 수 있는 공정을 개발하고, 치밀한 알루미늄 조직이 내부식성에 어떠한 영향을 미치는지 평가하였다. 기판은 냉연강판(cold rolled steel sheet)이 사용되었으며, 알루미늄 타겟의 순도는 99.999%, 크기는 직경 4"이었다. 냉연강판은 진공용기(vacuum chamber)에 장착하기 전에 계면활성제를 이용하여 표면에 존재하는 기름성분을 제거하였으며, 진공용기에 장착한 후에는 아르곤 가스를 이용하여 발생시킨 글로우 방전으로 표면에 존재하는 산화물을 제거하였다. 알루미늄 박막의 조직에 영향을 미치는 공정변수를 확인하기 위해서 스퍼터링 파워, 공정 온도, 공정 압력, 외부 자기장 세기 등의 공정 조건을 변화시켜 코팅을 실시하였다. 실험을 통해서 얻어진 최적 조건으로 알루미늄을 코팅할 경우, 알루미늄 bulk의 밀도와 비교하여 약 94.7%의 밀도를 갖는 알루미늄 박막을 코팅할 수 있었다. 알루미늄 박막이 약 3 ${\mu}$m의 두께로 코팅된 냉연강판의 내부식성 평가(salt spray test, 5% NaCl) 결과, 평가를 시작한 후 72시간 후에도 적청이 발생하지 않았다.

  • PDF

Improvement of water balance equation considering evaporation and re-evaluation of dam inflow (소양강댐 유역의 증발을 고려한 물수지 방정식 개선 및 댐 유입량 재산정)

  • Yoo, Jiyoung;Lee, Dong Jin;Yoo, Do-Guen;Kim, Tae-Woong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.106-106
    • /
    • 2022
  • 댐 유역의 수문자료는 댐의 효율적인 운영, 중장기 댐 운영 계획, 수자원 관리, 댐 저수량 예보 등을 위해 사용되며, 최근 기후변화로 인해 정밀한 댐 운영에 필요한 유량자료의 필요성은 더욱 커지고 있다. 일반적으로 댐의 주요 수문자료에는 유입량의 요소, 저수량 요소, 유출량의 요소로 구분된다. 현재까지 강수량, 저수위, 방류량 자료는 지속적인 계측 및 품질관리 기술의 발전으로 인해 신뢰도가 점차 향상되고 있으나, 반면 증발량과 침투량 자료는 여전히 정확한 계측에 많은 어려움이 있다. 따라서 우리나라의 댐 유입량은 직접측정의 현실적 제약사항으로 인해, 방류량과 저수위 변화에 따른 저류량의 차를 이용하여 간접적으로 측정하고 있어, 증발량 및 지하수 유출량 등과 같은 복잡한 자연현상을 고려하지 못한 채 저수지 수위의 변화에 따른 민감도가 크게 발생하는 문제로 이어지게 된다. 본 연구에서는 소양강댐 유역의 증발을 고려하는 개선된 물수지 방정식을 제안하였다. 그 결과, 기존의 댐 유입량 자료에서 발생하는 문제점은 증발을 고려한 물수지법 적용을 통해 어느 정도 개선이 가능하다. 즉, 기존의 댐 유입량 산정 시 고려하지 않는 다양한 유출 요인에 대한 과도한 누락은 음유입량 발생문제를 야기하며, 실제 복잡한 자연현상을 설명하기 위해서는 추가적인 유출 요소(증발량)를 물수지 방정식에 포함할 필요가 있다. 이처럼 개선된 물수지법을 적용할 경우, 직접적인 가용수자원을 구성하는 직접 유출량과 간접 유출량이 전체 유입량에 기여하는 정도를 파악할 수 있다. 다만, 여기에서의 증발량은 유역 내 실측자료가 아님과 동시에 수면 증발량을 고려하지 못한 한계가 있으며, 향후 연구에서는 보다 정확도 높은 수문자료의 생산 및 확보를 위한 지속적인 노력이 필요하다.

  • PDF

Comparative Study on the Fabrication of Single Grain YBCO Bulk Superconductors using Liquid Infiltration and Conventional Melt Growth Processes (단결정 YBCO 벌크 초전도체 제조에 대한 액상침투법과 고전적 용융공정의 비교연구)

  • Mahmood, Asif;Jun, Byung-Hyuk;Kim, Chan-Joong
    • Progress in Superconductivity
    • /
    • v.11 no.1
    • /
    • pp.42-46
    • /
    • 2009
  • With an aim of comparison, single grain Y-Ba-Cu-O (YBCO) bulk superconductors were fabricated using a liquid infiltration growth (LIG) process and a conventional melt growth (MTG) process with top seeding. The MTG process uses an $YBa_2Cu_3O_{7-x}$(Y123) powder as a precursor, while the LIG process uses $Y_2BaCuO_5(Y211)/Ba_3Cu_5O_8(Y035)$ pre-forms. The growth of a single Y123 domain on the top seed was successful in the both processes. Different feature between the two processes is the interior microstructure regarding the critical current density ($J_c$). The LIG-processed YBCO sample showed a lower porosity, more uniform distribution of Y211 particles and the enhanced Y211 refinement compared to the conventional MTG process. The $J_c$ improvement in the LIG process is attributed to the dispersion of finer Y211 particles as well as lower porosity within the Y123 superconducting matrix.

  • PDF

Effect of High-temperature Redrying on Drying Characteristics of CCA-treated Lodgepole Pine Dimension Lumber (고온 재건조가 CCA 처리 Lodgepole Pine 각재의 건조 특성에 미치는 영향)

  • Kim, Gyu-Hyeok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.18 no.3
    • /
    • pp.34-41
    • /
    • 1990
  • 본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

  • PDF

Quantitative Analysis for the Effects of Hydraulic Variables on the Formation of Freshwater-Saltwater Transition Zones in Aquifers (수리 변수들이 대수층 내의 담수 해수 - 확산대의 형성에 미치는 영향에 대한 정량적 분석)

  • 박남식
    • Water for future
    • /
    • v.28 no.2
    • /
    • pp.137-143
    • /
    • 1995
  • The location and the shape of freshwater-saltwater transition zones in coastal aquifers are affected by many hydraulic variables. To date most work to determine the effects of these variables are limited to qualitative comparison of transition zones. In this work characteristics of transition zones (maximum intrusion length, thickness, and degree of stratification) are quantified, and effects of principal hydraulic variables(velocity and dispersivity) on these characteristics are studied using a numerical model. Dimensional analysis is used to assemble entire model results. Effects of velocity and dispersivity are seen clearly. From this study, increase in velocity is found to cause shrinkage of transition zones. This observation contradicts claims by some that, because dispersion is proportional to velocity, increase in velocity would cause expansion of transition zones.

  • PDF

A Predict Outflow and Water Quality of Yongbong-Chun Drainage District by using SWMM (SWMM을 이용한 용봉천 배수구역의 유출 및 수질모의)

  • Park Sung Chun;Oh Chang Ryol;Lee Youn Gil;Jung Chun Lee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1333-1337
    • /
    • 2005
  • 본 연구는 강우로 인한 도시 배수구역에서의 유출량 및 수질을 예측하기 위하여 영산강 유역의 도시하천이며 합류식 배수계통을 갖는 용봉천을 대상으로 SWMM 모형을 적용하였다. SWMM 모형의 매개변수 최적화 및 검증자료로 사용하기 위하여 강우시 2회에 걸쳐 조사하였으며, 매회 시료 채취 주기는 강우유출이 발생하기 전부터 시작하여 첨두유출량이 발생때까지 $1\~2$시간 간격으로 채취한 후 강우 종료 후 유출량 변화가 없을 때까지 $9\~12$단계로 세분하여 유출량과 pH, DO, BOD, COD, SS, T-N, T-P의 농도를 측정하였다. 모형의 입력자료는 국립지리원의 지형도, 환경부의 환경지리정보, 농업과학기술원의 정밀토양도 등을 기초로 각 배수구역의 소유역을 분할하여 물리학적$\cdot$수리학적 매개변수에 해당하는 입력자료를 산출하였으며 그림1과 같다. 모형의 보정자료는 2004년 6월 17일에 실측한 자료를 이용하여 침투능 계수 및 축적계수와 지수, 쓸림계수를 보정하였고, 검증자료로는 2004년 7월 7일에 실측한 자료를 이용하여 검증자료로 사용하였다. SWMM 모델을 적용해서 강우유출에 의한 hydrograph와 pollutograph를 도출하여 부하량을 산정 하였다.

  • PDF

River discharge measurement and analysis for Nakdong-river basin in 2008 (2008년 낙동강 유량측정 및 유출특성 분석)

  • 유량조사사업단 유량조사실 낙동강그룹
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1889-1893
    • /
    • 2009
  • 수자원을 효율적으로 관리하고 이용하여 홍수 피해를 저감하고 환경친화적인 수자원의 역할을 제대로 자리매김하기 위하여 무엇보다 필요한 사항은 신뢰성 있는 유량자료를 기초자료로 확보하는 것이다. 그러나 기존의 유량 측정은 측정기준의 불명확, 예산과 측정장비의 부족, 전문 인력의 부재로 인해 유량자료의 신뢰성에 대한 문제가 지속적으로 제기되어 왔다. 따라서 정도 높은 유량 자료를 생성하고자 최근 유량조사사업단의 설립과 함께 유량측정을 전문적으로 담당하는 인력이 국내 주요지점에 대한 유량측정과 분석을 일상적으로 수행하는 등 유량자료의 품질의 개선노력이 계속되고 있다. 본 연구는 강화된 유량측정 기준과 개선된 방법론에 따른 현장측정을 통해 정밀한 유량측정성과를 확보하여 측정된 유량측정성과의 일상 검증을 통해 보다 정밀한 유량측정성과를 확보하고자 하였다. 또한, 유량측정 전 과정이 적절하게 이루어졌는지를 평가하여 낙동강권역의 신뢰성 있는 수위-유량관계곡선을 개발하였으며 개발된 곡선식을 이용하여 유량자료를 생성하고 유출률 분석 등을 통해 2008년 낙동강권역의 유출특성을 검토하였다. 2008년 낙동강권역의 유출특성은 낙동강 상류 및 동해 및 남해지역에 집중된 강수분포와 높은 가뭄지수로 인해 2008년 발생한 호우사상은 침투 및 증발에 의한 손실에 따라 유출량이 적게 평가되어 평균유출률은 약 30% 내외로 작게 산정되고 있는 것으로 나타났다.

  • PDF

Factors Affecting Shelf-life of Washed Shell Eggs (세척란의 저장성에 영향을 미치는 요인)

  • 전기흥;박영신;유익종
    • Korean Journal of Poultry Science
    • /
    • v.20 no.1
    • /
    • pp.33-41
    • /
    • 1993
  • Among the several factors that affect shelf-life of washed shell eggs, storage temperature and relative humidity were the most important. Besides those factors listed above, temperature of washing water, composition of foreign substances and washing method of eggs were also the factors affecting the shelf-life of the eggs. The effect of sanitizer treatment was significant in extending the shelf-life of eggs compared with washed and unwashed eggs. In case of oil coating treatment, the shell eggs treated showed the better results than that of washed and unwashed eggs because the coating materials prevented the moisture evaporation from the inner shell eggs and kept the contamination of microorganisms from the environment. Consequently, it is considered that reducing egg shell contamination of microorganisms and proper treatment could be the key to extend the shelf-life of shell eggs.

  • PDF

Hydrologic Cycle Simulation of Mokgam Watershed including CSOs (목감천 유역의 CSOs를 포함한 물순환 모의)

  • Lee, Kil-Sung;Hong, Won-Pyo;Chung, Eun-Sung;Kim, Kyung-Tae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1459-1463
    • /
    • 2007
  • 도시 유역의 하수관거는 대부분 합류식 하수관거로 되어 있기 때문에 도시하천의 물순환을 모의하기 위해 수량적인 측면이나 수질적인 측면에서 강우시의 합류식 하수관거 월류수 즉, CSOs를 고려한다면 보다 정확한 모의가 가능할 것이다. 목감천 유역은 중 상류 지역의 대부분은 농경 또는 임야로 이용되고 있지만, 하구부에는 밀집된 시가지가 전체유역 면적의 약 35.2 %인 $18.66\;km^2$를 형성하고 있고, 이중 대부분이 합류식 하수관거로 되어 있다. 따라서 목감천 유역을 PCSWMM의 TRANSPORT 블럭내의 flow divider를 이용하여 모형을 구성하여 1996년부터 2005년까지 10년 동안의 연속유출모의를 실시하여 물순환 분석을 하였다. 결과를 보면 10년 평균 강수량은 1537.9 mm이며, 직접유출량 비율은 1,263.0 mm, 침투량은 335.7 mm, 증발량은 415.7 mm이다. 또한 10년 평균 상수량은 909.10 mm, 하수량은 736.3 mm(CSOs 355.0 mm), 하천유입하수량은 170.3 mm, 서남 및 역곡하수처리장 이송량은 211.0 mm이다. 부하량 결과를 살펴보면 발생부하량은 10,108,554 kg/year이며 배출부하량은 834,533 kg/year으로, 이는 곧 점오염원을 의미한다. 유역 총 배출량은 1,575,200 kg/year, 비점오염원은 740,667 kg/year, 하수처리장 이송부하량은 1,220,000 kg/year, 목감천 출구지점에서는 355,200 kg/year(CSOs 62,531 kg/year)임을 알 수 있었다.

  • PDF