• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.173-182
• /
• 2016

Although the ecosystem extends numerous functions for the benefit of humankind, construction of horticultural facilities can potentially lead to the degeneration of some of these functions owing to the expansion of impervious regions and loss of habitats. Thus, this study aimed to examine the effect of construction of horticultural facilities on plant biodiversity. Analysis of the vegetation distribution characteristics showed that horticultural facilities had significantly lower plant diversity than did rice paddies. Hence, the proposed approach involved low-impact development, arrangement of habitat space, plant preservation, restricted use of chemical fertilizer, habitat creation, and reduced preservation cost. Lifestyle analysis suggested the importance of developing favorable environments for the growth of annual plants and aquatic plants. In all, 20 species of naturalized plants belonging to 10 families were identified. Furthermore, the proportion of these naturalized plants was higher in glass greenhouses and multi-span greenhouses, suggesting the advantages of employing natural soil mulching while avoiding concrete mulching. Statistical analysis was performed to validate the results, which suggested that impervious regions be converted to natural soils. Collectively, the findings of this study are expected to be used for establishing policies for the construction of eco-friendly and ecological horticultural facilities; this may aid the maintenance of sustainable agricultural landscapes and large-scale development of the reclaimed lands.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2016

In this research, characteristic properties of gel time and homo gel strength of liquid chemical grouting material for soil grouting using non-cement binder(NCB) were measured according to kinds of liquid B's Binders, W/B of liquid B's Binders and the volume ratio between liquid A and liquid B in order to examine on the applicability of soil grouting material using non-cement binder. The test was performed using NCB-1, NCB-2, NCB-3 which are environment-friendly inorganic binders developed by means of collaboration by our research team and which are different from chemical composition ratio each other. In conclusion, it was found that NCB could be applied to liquid soil grouting material using non-cement binder and replace ordinary portland cement, because NCB had the most excellent performance in certain section of gel time and homo gel strength in condition of this experiment.

• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.75-83
• /
• 2015

This study discusses the long-term antifungal effect and antifungal performance of Hwangtoh mortars with various natural antifungal substances on five types of mold: Chaetomium globosum, Aspergillus niger, Aureobasidium pullulans, Gliocladium virens, and Penicillium pinophilum, which can be easily detected in the indoors and outdoors of buildings in damp environments. The antifungal performances of various natural antifungal substances extracted from Marjoram, Phytoncide, Thyme, Ginkgo leaves, and Chitosan (oligosaccharide) were investigated on the five types of mold, as a basic experiment. Using the natural antifungal substances selected for the basic experiment, antifungal mortars were made, and their antifungal performance and long-term antifungal effects were also investigated. The results clearly showed that the marjoram extract and their associated mortars had excellent antifungal performance. Also, their long-term antifungal effects were outstanding and at an equivalent level to those of the mortars with organic chemical antifungal agents. The optimum addition rate of the marjoram extract in the mortar was 5% by mass of binder. It was also shown that the phytoncide extract in the mortar needed an addition rate of more than 10% according to the mass of binder, considering the long-term antifungal effect and the antifungal performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.375-381
• /
• 2017

Recently, due to the increasing of interest about the eco-friendly concrete, it is being increased to use concretes containing by-products of industry such as fly ash, ground granulated blast furnace slag, silica fume, and etc. Especially, these are well known for improving the resistance to reinforcement corrosion in concrete and decreasing chloride ion penetration. The purpose of this experimental research is to evaluate the resistance to corrosion of reinforcement and critical chloride content of high volume fly ash concrete(HVFAC) which is replaced with fly ash for approximately 50% cement content. For this purpose, corrosion monitoring of reinforcement by half cell potential method was carried out for the cylindrical test specimens that the upper of reinforcement in concrete was exposed to detect the time of corrosion initiation for reinforcement. It was observed from the test result that the the time of corrosion initiation for reinforcement of HVFAC by the accelerated corrosion tests increased 1.2~1.3 times than plain concrete and the critical chloride contents of plain concrete and HVFAC were found to range $0.80{\sim}1.20kg/m^3$, $0.89{\sim}1.60kg/m^3$, respectively.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.225-228
• /
• 2018

Plasticizers added to thermoplastic polymers are known to shorten the life of products due to the elution to outside, and some of them are harmful to our environment and human body. Since the use of phthalate plasticizers suspected of being carcinogens has been gradually prohibited, there is a need for environmentally friendly plasticizers that can replace them. Most of the substances have a low compatibility with resin, high cost and lack of safety verification. Therefore, in this study, four kinds of norbornene dialkyl ester compounds possessing excellent physical properties, which are also reported as safe compounds from the toxicity evaluation, were added to PVC resin to evaluate the possibility of human exposure by leaching, and also the potential usage as plasticizer candidates alternative to commercial ones including DEHP, DINCH and DOTP. The test was carried out according to the American standard test method (ASTM). The results showed that di-2-ethylhexyl-5-norbornene-2,3-dicarboxylate (DEHN) in aqueous solvents and diisopentyl-5-norbornene-2,3-dicarboxylate (DIPN) compounds in oil solvents were superior or equivalent to DEHP. In addition, all four norbornene compounds showed lower values than 100 ppm, which is considered to have an influence on the environment, indicating that the polar norbornene structure affects the elution.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.804-809
• /
• 2015

Since Korea is home to Reticulitermes speratus, a kind of subterranean termites that prefer dark and humid conditions, there have been increasing damages to wooden structures by termites. One noticeable attribute of Korean subterranean termites is that they prefer than Pinus densiflora, the major construction material for Korean traditional houses. And because wide varieties of termites are distributed all over the world, it is not so easy to choose appropriate control methods depending on specific areas. This necessitates careful applications of the following control methods depending on the kinds of termites: fumigation treatment, soil termiticide, preservatives and insect treatment, termite colony elimination system, chemical treatment, and other physical and biological treatment methods. The purpose of this study is to investigate the control effects of environmentally-friendly Alkaline copper quaternary (ACQ), Copper Azole (CuAZ) and Micronized copper quarter (MCQ) on the termites contributing to the damage of wooden structures. It was found in this study that wood with preservative treatment produced a significantly higher termicidal efficacy than untreated wood.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.165-170
• /
• 2008

In this study, the physicochemical, microbial, and sensory properties of law-fat hamburger patties during storage for 25 days at $7{\pm}1^{\circ}C$ were investigated. The law-fat hamburger patties were manufactured by three different packing methods (control: added with 10% lard regular-fat patty, T1: added with 10% lard and organic vegetable of regular-fat patty, T2: added with 3% olive oil of vegetability low-fat patty, T3: added with 3% lard of low-fat patty). The pH of all treated samples increased as the storage time increased, and then decreased after 15 days of storage. The low-fat hamburger patty added with organic olive oil (T2) showed significantly higher pH (p<0.05) compared with other treatments (T1 and T3). The TBARS values of the all treated samples tended to increase after 5 days of storage, and then significant quality loss was observed after 15 days of storage period for the control (T1). However, the samples of the vegitability low-fat patty added organic olive oil had longer shelf-life than the control. The total bacterial counts were 7 log CFU/g after 15 days and 20 days of storage for the control and treatments, respectively. The results of this study showed that the storage period of the treatments was slightly extended compared with the control. Low-fat hamburger patties showed no differences for overall acceptability between control and other patties.

• Clean Technology
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2018

This study presents a novel and eco-friendly process that can precisely control the location of the patches on the patch particles. The method of manufacturing these anisotropic hexagram patch particles consists of sequential combinations of two separate methods such as a sequential micromolding technique for fabricating patch particles and a selective localization method for controlling the location of patches on the patch particles. The micromolding technique was carried out using physicochemically stable material as a micromold. In order to fabricate the highly stable patch anisotropic hexagram particles, the perfluoropolyether (PFPE) micromold was used to the process of the micromolding technique because they could prevent the problem of diffusion of hydrophobic monomers while conventional poly(dimethylsiloxane) (PDMS) micromold is limited to prevent the problem of diffusion of hydrophobic monomers. Based on combination methods of the micromolding technique and the selective localization method, the reproducibility and stability have been improved to fabricate 12 different types of anisotropic hexagram patch particles. This fabrication method shows the unique advantages in eco-friend condition, easy and fast fabrication due to less number of process, the feasibility of a mass production. We believe that these anisotropic hexagram patch particles can be widely utilized to the field of the directional self-assembly.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2011

Eco-friendly materials or bio-composites were made with poly(lactic acid) (PLA) as matrix polymer and kenaf fibers as filler. Also, acetylated kenaf fibers and compatibilizer were adopted in order to improve the interfacial adhesion between fiber and polymer. In this study, the effect of chemical modification and compatibilizer on the mechanical-viscoelastic and morphology properties of the bio-composites was discussed. The hydrophobic fibers by acetylation were known to show better interfacial bonding with the matrix polymer and resulted in improved performance and morphology. Viscoelastic property and glass transition temperature, however, were not nearly enhanced.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.330-339
• /
• 2009

The material properties of Cedar (Cryptomeria japonica) were evaluated according to heat treatment conditions. The special focus was made on the color control of cedar wood by heat treatment. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature above $170^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition than the control. The heat-treated wood was also effective in increasing the durability against wood rotting fungi. However, more study is required to develop heat treatment as an environmentally-friendly technology for wood preservation without chemical. The mechanical properties of heat-treated wood showed relatively higher performance than the control in general. Meanwhile the dramatic decrease in impact bending stress due to the loss of ductility may limit uses of heat-treated wood in certain cases. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study on the chemical analysis of heat-treated wood is needed to scrutinize the causes of changes of material properties.