• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.37-43
• /
• 2008

The research attempted to develop an eco-friendly wood adhesive based on vegetable oil (soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oils (SBO) were reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. Modified chemical structure of the ozonized SBOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of SBO had an absorbance peak at $3010cm^{-1}$ that is the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and aldehyde or carboxyl peak appeared at $1700cm^{-1}$. The dry, wet, and cyclic boiling bond strengths of the ozonized SBO mixed with polymeric diphenylmethane-4, 4-diisocyanate (pMDI) were also investigated. In the dry shear test, all strengths met constantly the standard requirement of $7.0kgf/cm^2$ (KS F3101 2006). The bond strengths gradually increased with increasing ozone treatment time. The highest strength showed at 60 minutes ozone treatment and decreased values at 120 minutes. In the cyclic boiling shear test, 30, 60 and 120 minutes exceeded the standard requirement.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.453-466
• /
• 2020

As the demand for eco-friendly energy increases to overcome the energy shortage and environmental pollution crisis, hydrogen economy has been proposed as a potential solution. Accordingly, an economical and efficient hydrogen production is considered to be an essential industrial process. Research on applying hydrogen separation membranes for H₂/CO₂ separation to the production of highly concentrated hydrogen by purifying H₂ and capturing CO₂ simultaneously from synthetic gas produced by gasification is in progress nowadays. In high temperature environments, the membrane separation process using glassy polymeric membrane with H₂ selectivity has the potential for CO₂ capture performance, and is an energy and cost effective system since polybenzimicazole (PBI)-based separators show excellent chemical and mechanical stability under high-temperature operation conditions. Thus, the development of high-performance PBI hydrogen separators has been rapidly progressing in recent years. This overview focuses on the recent developments of PBI-based membranes including structure modified, cross-linked, blended and carbonized membranes for applications to the industrial hydrogen separation process.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.209-215
• /
• 2013

This study is aimed to identify the method to use the CaO-$Al_2O_3$ system of rapidly cooled steel making slag (RCSS) as the environment-friendly inorganic accelerating agent by analyzing its physical and chemical properties. The fraction of rapidly cooled steel making slag is distinguished from its fibrous, and the contents of CaO and $Fe_2O_3$ are inversely proportional across different fractions. In addition, as the content of CaO decreased and the content of $Fe_2O_3$ increased, the loss ignition tended to become negative (-) and the density increased. The pore distribution by mercury intrusion porosimetry is very low as compared to the slowly cooled steel-making slag, which indicates that the internal defect and the microspore rate are remarkably lowered by the rapid cooling. To analyze the major minerals the rapidly cooled steel-making slag, XRD, f-CaO quantification and SEM-EDAX analysis have been performed. The results shows that f-CaO does not exist, and the components are mainly consisted of $C_{12}A_7$ and reactive ${\beta}-C_2S$.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.421-425
• /
• 2020

We investigated an ecologically-sensitive method to control Polyphagotarsonemus latus in a green perilla polyvinyl house using concentrated pyrethrum. The survival rates of Polyphagotarsonemus latus nymphs and adults to 2%, 4%, and 6% pyrethrum 3 days after spraying were 58.1%, 27.5%, and 22.7% respectively, and 73.4%, 37.3%, and 30.6% at 5 days after spraying. These results show that the most effective control occurred using 6% pyrethrum. To investigating the densities of P. latus on a 1 cm diameter leaf-disk of green perilla, we sprayed the leaf every 10 days from May 10 with 6% pyrethrum 1,000 times and milbemectin EC 2% 1,000 times. The period chosen was one where the incidence of P. latus could be predicted. The density was kept low during the treatment period. However, if leaf damage had already occurred from P. latus, the density could not be decreased by spraying 1 or 2 times each week where milbemectin EC 2% was used, but the population could be reduced when sprayed 3 times. Therefore, in order to effectively control P. latus in green perilla greenhouses, it is important to begin treatment at an early stage when P. latus are first observed.

• Clean Technology
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2021

A solar water battery is a system that generates power using solar energy. It is a combination of photoelectrochemical cells and an energy storage system. It can simultaneously convert and store solar energy without additional external voltage. Solar water batteries consist of photoelectrodes, storage electrodes and counter electrodes, and their properties and combination are important for the performance and the efficiency of the system. In this study, we tried to find the effect that changing the components of solar water batteries has on its system. The effects of the counter electrode during discharge, the kinds of photoelectrode and storage electrode materials, and electrolytes on the solar energy conversion and storage capacitance were studied. The optimized composition (TiO2 : NaFe-PB : Pt foil) exhibited 72.393 mAh g-1 of discharge capacity after 15 h of photocharging. It indicates that the efficiency of solar energy conversion and storage is largely affected by the configuration of the system. Also, the addition of organic pollutants to the chamber of the photoelectrode improved the battery's photo-current and discharge capacity by efficient photoelectron-hole pair separation with simultaneous degradation of organic pollutants. Solar water batteries are a new eco-friendly solar energy conversion and storage system that does not require additional external voltages. It is also expected to be used for water treatment that utilizes solar energy.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.221-232
• /
• 2023

Carbon neutrality requires carbon dioxide reduction technology and alternative green energy sources. Palygorskite is a clay mineral with a ribbon structure and possess a large surface area due to the nanoscale pore size. The clay mineral has been proposed as a potential material to capture carbon dioxide (CO₂) and possibly to store eco-friendly hydrogen gas (H2). We report our preliminary results of grand canonical Monte Carlo (GCMC) simulations that investigated the adsorption isotherms and mechanisms of CO₂ and H₂ into palygorskite nanopores at room temperature. As the chemical potential of gas increased, the adsorbed amount of CO₂ or H₂ within the palygorskite nanopores increased. Compared to CO₂, injection of H₂ into palygorskite required higher energy. The mean squared displacement within palygorskite nanopores was much higher for H₂ than for CO₂, which is consistent with experiments. Our simulations found that CO₂ molecules were arranged in a row in the nanopores, while H₂ molecules showed highly disordered arrangement. This simulation method is promising for finding Earth materials suitable for CO₂ capture and H₂ storage and also expected to contribute to fundamental understanding of fluid-mineral interactions in the geological underground.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.2
• /
• pp.67-76
• /
• 2024

In light of the development of modern high-tech industries, where human sustainability is becoming increasingly important, anorthosite needs to be reevaluated not only for its potential as a new source of aluminum, but also as a primary resource with a wide range of industrial applications. In particular, a relatively simple chemical composition with a high CaO content and Al₂O₃/SiO₂ ratio, along with its relatively low impurity levels and chemically stable nature offers significant advantages in industrial processes. Thus, anorthosite is considered as an important industrial resource in the age of energy transition. In this review, we examine the mineralogical and geochemical characteristics of anorthosite that determines their stability and reactivity. Based on their characteristics, we propose the potential use of utilizing the anorthosite as an alternative to the Bayer process which has the limitations. We also explore its application as the eco-friendly geo-synthetic materials, and as the new materials for carbon dioxide storage and utilization. As the demand for aluminum applications accelerates, anorthosite is gaining their importance in the geological industry and clean energy field. Therefore, advanced and extensive research on anorthosite complex occurring in the Hadong and Sancheong regions of Korea is critical to obtain opportunities to enhance economic advantages through efficient utilization of national resources and to lead to sustainable development.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.35-40
• /
• 2016

Recently, bacterial angular leaf spot disease, caused by Xanthomonas fragariae, causes severe damage in strawberry production and its' export to other countries, since the pathogen has been classified as an A2 quarantine pathogen. Typical the Angular Leaf Spot (ALS) disease represent that water-soaked angular spots symptoms, bacteria ooze exudate under relatively high humidity condition and later the spot become reddish brown on the leaf surface. The pathogen disseminated by irrigation water, infected mother plant and farmer's hand. In this study, we reported that rubbing inoculation method showed more effective in the pathogen dissemination than infiltration with needles, regardless the strawberry cultivars. Additionally, Dichloroisocyanurate (NaDCC) treatment in commercial strawberry fields provided reliable efficiency to reduce the bacterial angular leaf spot disease incidency and severity.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.188-193
• /
• 2007

Semi-solvent type cleaning agents were prepared by mixing naphthenes, natural terpene oil, surfactant and water, and measured their physical properties. And also, cleaning efficiency for flux and grease was measured by gravimetric method. By measuring the physical properties, pH for cleaning agents were 6.0~6.7, surface tension, 27.4~28.4 dyne/cm, and wetting index, 8.65~12.46 (with water), 11.99~17.43 (without water). The cleaning agent composed of naphthene, 30 wt%, natural terpene oil, 45 wt%, surfactant, 13 wt%, co-surfactant, 12 wt%, and water, 0 wt% had the largest wetting index, and shown the most effective cleaning properties for flux (98.66%) and grease (93.44%). The conductivity with $0.5{\sim}0.9{\mu}s/cm$ to the cleaning agent containing small amount of water was found to form W/O type microemulsion.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.501-505
• /
• 2017

Due to the rapid urbanization and increased population, there is an increase in airtight nature of buildings which causes serious indoor air pollution. Among several indoor air pollutants, volatile organic compounds (VOCs) emitted from paint are of major concern. Therefore, there is an urge for the development of environmental friendly paint products. In this wok, a natural wall paint (NWP) was prepared by utilizing a natural clay material "sericite" as a main component. A small chamber test was carried out to identify the toxic substances release from NWP and the results were compared with two eco-friendly commercial paints. The total VOCs were detected in trace level inside the test chamber and their concentrations were below the recommended indoor air quality standards. Toluene was not detected for NWP, whereas formaldehyde was observed in trace level. The toxicity index results were compared with two commercial paints and found that NWP exhibited less harmful gas emission. Based on certification rating of building materials, NWP can be classified as the first grade of building materials. Due to the above advantages, the use of sericite as a major component in NWP will be a useful technique to maintain the indoor air quality.