• Journal of the KSME
• /
• v.25 no.5
• /
• pp.413-418
• /
• 1985

직접 접촉식 교환장치(이하 직접 교환기라 함)에서 액체의 유통형태의 선택은 매우 다양하며 전달계수 역시 개별적인 상황이나 충전물의 종류에 따라서 달라지므로 일률적으로 제시되지 못 하고 있다. 많은 경우 실험을 통하여 열전달 또는 물질전달계수를 측정하게 되나 개수로, 자유 낙하액체막, 액체분류와 같이 이상화가 가능한 경우, 이러한 전달계수를 구하기 위하여 이론적 또는 반실험적인 해석을 수행하기도 한다. 수많은 관련 연구결과들은 층류유동에 관한 것과 난류유동의 경우로 구분되고(예상되듯이 대부분의 직접교환기의 유통영역은 난류쪽이다), 난류 유통의 해석은 다시 표면갱신이론(surface renewal model), 와류확산계수모델(eddy diffusivity model-macroscopic), 미분형와류모델(differential eddy diffusivity model)로 대별된다. 여기서는 수많은 교환기형태의 자료정리보다 상기와 같이 대별된 액체측 유동영역별로 전달현상해석의 방법을 간단히 정리하고자 한다.

• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2011

Laminar Flow over an equilateral triangular cylinder is studied for several inflow angles. Under an uniform flow of $Re_d$=50,75,100,125,150, the triangular cylinder is rotated by ${\theta}$=$0^{\circ}$,$15^{\circ}$,$30^{\circ}$,$45^{\circ}$,$60^{\circ}$,$75^{\circ}$,$90^{\circ}$,$105^{\circ}$. The governing equations are solved by the PISO algorithm based on the finite volume method of the unstructured grid system. The effects of the inflow angle on the vortex-shedding flows are investigated. The Strouhal number shows a minimum at ${\theta}$=$60^{\circ}$. It is closely related to the variation of pressure and flow structure induced by the movement of separation points.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.438-443
• /
• 2007

개수로 흐름에 대한 연구는 1700년대 중엽 Chezy에 의해 이론적인 기초를 다졌으며, 광범위하고 조직적인 관측연구는 Darcy(1803-1858)에 의해 약 150년 전에 폭 2m, 길이 600m에 이르는 수로에서 실험관측을 수행하고자 시도하였다. Darcy의 동료이자 후계자인 Bazin은 제한된 조건의 현장관측뿐 아니라 다양한 조건의 수로를 제작하여 실험관측을 수행하였으며 그의 실험자료는 Bazin 자신 뿐만 아니라 Manning이나 Ganguillet와 Kutter 등 여러 연구자들의 경험식 개발에도 이용되었다. Nikuradse(1933)의 균일조도 원형관수로 실험결과로부터 관로 흐름은 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 종류의 흐름특성을 가지고 있음을 확인하였고 Bazin(1829-1917)과 varwick(1945)의 실험결과로부터 개수로 흐름에서도 관로 흐름과 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯가지의 흐름특성이 존재함을 알 수 있다. 본 연구에서는 기존의 지수형 마찰계수 산정식에서 단순히 조고만의 함수였던 ${\alpha}$에 물의 기본적인 성질인 표면장력, 점성력, 밀도와 자연 하천의 경사, 수심, 수면, 폭, 조고의 영향을 고려한 수심에 관한 무차원수 $Y_h$, 수면 폭에 관한 무차원수 $Y_b$, 조고에 관한 무차원수 $Y_k$를 도입하였다. 따라서 개수로 흐름 해석에 있어서 기존의 마찰계수 산정치보다 여러 영향을 반영하여 정확한 값을 산정할 수 있을 것으로 판단된다.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.82-91
• /
• 2010

Grouting technology is one of the ground improvement methods used in water controlling and reinforcement of rock mass in underground structure construction. It is necessarily required to find out the characteristics of grout flow through discontinuities in a rock mass for an adequate grout design and performance assessment. Laminar flow is not always applicable in simulating a grout flow in a rock mass, since the rock joints usually have apertures at a micro-scale and the flow through these joints is affected by the joint roughness and the velocity profile of the flow changes partially near the roughness. Thus, the influence of joint roughness and aperture on the grout flow in rough rock joint was numerically investigated in this study. The commercial computational fluid dynamics code, FLUENT, was applied for this purpose. The computed results by embedded Herschel-Bulkley model and VOF (volume of fluid) model, which are applicable to simulate grout flow in a narrow rock joint that is filled with air and water, were well compared with that of analytical results and previously published laboratory test for the verification. The injection pressure required to keep constant injection rate of grout was calculated in a variety of Joint Roughness Coefficient (JRC) and aperture conditions, and the effect of joint roughness and aperture on grout flow were quantified.

• Journal of computational fluids engineering
• /
• v.6 no.1
• /
• pp.21-30
• /
• 2001

A numerical study on the similarity of the developing laminar flows between in a straight duct rotating about an axis perpendicular to that of the duct and in a stationary curved duct was carried out. In order to clarify the analogy of two flows, dimensionless parameters K/sub LR/ = Re/(equation omitted) and Rossby number, Ro, in a rotating straight duct were used as a set corresponding to Dean number K/sub LC/ = Re/(equation omitted), and curvature ratio, λ, in a stationary curved duct. For the large values of Ro and λ, it is shown that the flow field satisfies the 'asymptotic invariance property', that is, there are strong quantitative similarities between the two flows such as flow patterns, friction factors, and maximum axial velocity magnitudes for the same values of K/sub LR/ and K/sub LC/ if they are correlated with dimensionless axial distances Z/sub R/ = z/(equation omitted) for a rotating duct flow and Z/sub C/ = z/(equation omitted) for a stationary curved duct flow.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1301-1309
• /
• 1989

본 연구의 목적은 Lumley의 저항감소 모델을 사용하여 여러 부하도하에서 부유유동의 유동 특성을 관찰하는 것으로, 특히 저항감소가 일어날 때와 일어나지 않을 때의 유동특성을 알아 보고자 한다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.360-364
• /
• 2013

본 연구에서는 아음속 저 레이놀즈 수에서 NACA0012에 나타난 층류 박리 거품과 천이유동에 대해 연구하였다. 천이유동조건과 완전난류유동 조건에 따른 EDISON 계산 결과 값과 실험값의 공력계수를 비교하였다. 또한, EDISON 계산 결과 값과 Xfoil을 이용하여 나온 결과 값의 천이점 비교를 통해 Xfoil의 천이 모델과 EDISON 천이 모델간의 차이를 비교하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.36-36
• /
• 2000

천음속 또는 초음속 유동이 유동장의 하류에서 부여되는 압력조건에 의하여 감속되는 경우나, 유동방향의 갑작스런 변화를 요구하는 물체 혹은 벽면이 존재하는 경우에 발생한 충격파는 벽면을 따라 발생하는 층류 혹은 난류 경계층과 복잡한 상호간섭 (interaction)을 일으켜 충격파에 의한 박리 발생, 충격파 하류에 새로운 충격파 발생, 충격파가 큰 진폭으로 진동하게 되는 현상 등을 발생시킨다. 이러한 간섭현상은 고속유동이 통과하는 유체요소나 유체기기의 성능을 좌우하는 매우 중요한 유동현상으로, 유체기계의 설계 시 사전에 고려되어야 할 중요한 공학적 문제이다.(중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.92-100
• /
• 2018

Vortical systems are considered a main feature to sustain turbulence in a boundary layer through interaction. Such turbulent structures result in frictional drag and erosion or vibration in engineering applications. Research for controlling turbulent flow has been actively carried out, but in order to show the effect of vortices in a turbulent boundary layer, it is necessary to clarify the mechanism by which turbulent energy is transferred. For this purpose, it is convenient to demonstrate and capture phenomena in a laminar boundary layer. Therefore, in this study, the interactions of disturbed flow around a hemisphere on a flat plate in laminar flow were analyzed. In other words, a street of hairpin vortices was generated following a wake region formed after flow separation occurred over a hemisphere. Necklace vortices surrounding the hemisphere also appeared due to a strong adverse pressure gradient that brought high momentum fluid into the wake region thereby leading to an increase in the frequency of hairpin vortices. To mitigate the effect of these necklace vortices, local suction control was applied through a hole in front of the hemisphere. Flow visualization was recorded to qualitatively determine flow modifications, and hot-film measurements quantitatively supported conclusions on how much the power of the hairpin vortices was reduced by local wall suction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.441-448
• /
• 2004

A numerical study was conducted to show the effect of aspect ratio on the analogy of the developing laminar flows between in orthogonally rotating straight duct and in a stationary curved duct of rectangular cross-section. In order. to clarify the similarity of two nows, dimensionless parameters (equation omitted) and Rossby Ro= $w_{m}$$\Omega$ $d_{h}$, in a rotating straight duct were used as a set corresponding to Dean number, (equation omitted), and curvature ratio, λ=R/ $d_{h}$, in a stationary curved duct. Four. different aspect ratios A=0.25, 0.5, 2 and 4 were considered. Under the condition that the magnitudes of Ro and λ were large enough to satisfy the 'asymptotic invariance property' and the aspect ratio was larger than 1, there were strong quantitative similarities between the two flows such as flow patterns, friction factors, and maximum axial velocity magnitudes fur the same values of $K_{LR}$ and $K_{LC}$ . On the other hand, as the aspect ratio decreased below 1 (A=0.25 and 0.5), the difference of the secondary flow intensity between these two flows was enhanced and therefore the analogy of two flows was not so evident as that of the larger aspect ratio (A=2 and 4). 4).nd 4).