• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.203-211
• /
• 2013

Shear behavior of joint plane has been investigated considering the magnitude of normal stresses and initial surface roughness. Shear strength of joint plane has been measured by performing the multi-stage shear test in which applied normal stress level has been increased stepwise. Multi-stage shear test within the specified normal stress range has been repeated and two types of strength parameter variation have been observed: type 1 - both cohesion and friction angle decrease, type 2 - cohesion decrease and friction angle increase. Trends of strength parameter variation for the three rock types, gneiss, granite and shale, have been investigated and the influence of initial roughness of joint plane on the sequential shear strength change for the repeated multi-stage shear tests also has been analyzed.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.266-271
• /
• 2002

The finite schematic eye based on spherical aberration and Stiles-Crawford effect is designed by an optimization method. It consists of four aspherical surfaces. The radius of curvature, thickness, asphericity, and spherical aberration are used as constraints in the optimization process. Stiles-Crawford effect in the pupil is considered as a weighting value for optimum design. The designed schematic eye has effective focal length of 20.8169 mm, back focal length of 15.4820 mm, front focal length of -13.8528 mm, and image distance of 15.7150 mm. When the pupil diameter is 4 mm, the diameter of entrance pupil and exit pupil are 4.6919 mm and 4.2395 mm, respectively. From the data of 75 measured Korean emmetropic eyes, this finite schematic eye is designed first in Korea.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.258-264
• /
• 2003

The present paper studies how to calibrate hydrometer using image process. The method aligns particular scales of hydrometer selected for calibrating the hydrometer with the horizontal plane of the reference liquid automatically without man's operation. Major parts composing the system are CCD camera, frame grabber, stepping motor and image process program. The image process program is composed of a part that locates the meniscus and aligns it with a scale and a part that controls the step motor. To verify the performance of the developed method, this study compares the meniscus and scale observed directly with the naked eye with the result of calibration by the manual calibration method. The differences between the corrections were less than $0.004\;kg/m^3$ with uncertainty of $0.06\;kg/m^3$. These showed that the calibration results of the developed hydrometer calibration using image process nearly equal to manual method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.173-180
• /
• 1994

One can see more and more photograrmmetric applications dealing with the extraction of information from images obtained with CCD (Charge Coupled Device) camera scanners. In order for this information to be useful, the scanning errors of scanners must be known through a calibration. Investigation of this study is given to the detailed procedure of the correction for scanning errors created during the scanning of photographs with CCD camera scanner using the three kinds of high resolution reseal plates prepared. The geometric corrected digital images for scanning errors were generated and the accuracy of the resulting new images for each types of plates were checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.61-66
• /
• 2004

To make a guide line of property control of angiography equipments, we made standard evaluation sheet forms of facility and management of angiography suite, physical properties of angiography equipments, and image quality of film and then surveyed them at 29 hospital nationwide. Survey and development of standard evaluation sheet form of physical properties of angiography equipments. By using resolution & radiation dose, physical properties of angiography equipments of 49 in number nationwide were evaluated. Most of them (91%) had good performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.617-624
• /
• 2008

In general, RTK-GPS(Real Time Kinematic GPS) based on the single reference station is able to determinate the high accurate position of rover on the spot using error correction information of transmitted carrier phase from the base station via wireless modem. However, single reference station method has some weak points to decrease positioning accuracy because it must be obtained carrier phase from the each satellite continuously, allowed to transmit without obstacle and limited to short base line distance between base and rover station. This paper aims to attempt network based GPS carrier phase differential positioning using three multi reference stations to overcome the method of single reference station and RTK network is realized by real time monitoring program with Visual C++. The optimum error correction value of three multi reference stations by RTK networking is selected automatically to correct the position of rover station. In this paper, this algorithm is applied to determine sea water level using GPS buoy, and the accuracy results of water level change were analyzed and compared with each other using single and multi reference stations.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1835_1836
• /
• 2009

본 논문에서는 비접촉식 미세 측정 광학기에 의해 측정된 이미지를 Stitching 기술과 B-Spline 보간법에 의해 보다 빠르고, 정밀한 복원 기법을 제안한다. 이를 위해 먼저 각각의 이미지로부터 매칭, 피매칭 템플릿(Template)을 검출한다. 그런 다음 두 이미지의 오버랩(Overlap)되는 부분을 기준하여 기준면으로부터 roll, pitch, yaw 오차를 계산하여 매칭시킨다. 마지막으로, B-Spline 보간법에 의해 매칭된 부분을 연속화한다. 제안된 방법은 실험을 통해 그 응용 가능성을 증명한다.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.28-28
• /
• 2003

한국천문연구원이 개발한 iRTK(inverted Real Time Kinemtic) 시스템의 성능을 분석하고 개선방향에 대해 논의하였다. 제안하는 iRTK 시스템은 기존의 실시간 고정밀 측위기법인 RTK와 측위방법과 적용범위 면에서 유사하지만, 중앙에서 일괄적으로 사용자의 위치를 계산하고 유무선 인터넷을 이용하므로 통신범위에 제약을 받지 않는 장점이 있다. iRTK 시스템의 성능분석은 소요시간, 성공률, 정확도를 판단기준으로 하여 이루어졌으며 측정점에서는 중저가의 GPS 수신기를 사용하였다. 분석결과 기준점과의 기선거리 5km 이내에서 1-3m 수준의 측위정밀도를 얻을 수 있었으며, 측위성공률은 최적의 측정시간을 이용할 경우 약 90% 수준이었다. 이를 통해 iRTK 시스템의 적용가능 분야를 살펴보고 적용범위와 정밀도 개선을 위한 몇 가지 개선사항을 검토하였다. 이 중 VRS(Virtual Reference System)는 iRTK 시스템의 성능을 개선하고 단점을 보완할 수 있는 대안으로 검토되었으며, iRTK+VRS 시스템 구축의 가능성에 대해 논의하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.3
• /
• pp.162-167
• /
• 2013

The variation of S11 depending on the ground sizes of circular planar monopole UWB antenna was studied. And optimal ground structure and size in UWB application devices are proposed. Radius R of circular monopole UWB antenna as a reference antenna was designed for UWB frequency band, and the measured results of this antenna on the horizontal ground plane was good agreed with the simulated results. When radius R is small, optimal size of ground plane is proposed, and when radius R is more large, minimum size of ground plane is proposed.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.45-57
• /
• 1997

It is mandatory to measure accurately the dose distribution and the total absorbed dose of fast neutron for putting it to the clinical use. At present the methods of measurement of fast neutron are proposed largely by American Associations of Physicists in Medicine, European Clinical Neutron Dosimetry Group, and International Commission on Radiation Units and Measurements. The complexity of measurement, however, induces the methodological differences between them. In our study, therefore, we tried to establish a unique technique of measurement by means of measuring the emitted doses and the dose distribution of fast neutron beam from neutron therapy machine, and to invent a standard method of measurement adequate to our situation. For measuring the absorbed doses and the dose distribution of fast neutron beam, we used IC-17 and IC-18 ion chambers manufactured by A-150 plastic(tissue-equivalent material), IC-17M ion chamber manufactured by magnesium, TE gas and Ar gas, and RDM 2A electrometer. The magnitude of gamma-contamination intermingled with fast neutron beam was about 13％ at 5cm depth of standard irradiated field, and increased as the depth was increased. At the central axis the maximum dose depth and 50％ dose depth were 1.32cm and 14.8cm, respectively. The surface dose rate was 41.6-54.1％ throughout the entire irradiated fields and increased as the irradiated fields were increased. Beam profile was that the horn effect of about 7.5％ appeared at 2.5cm depth and the flattest at 10cm depth.