• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.3
• /
• pp.124-130
• /
• 2000

This study was conducted to evaluate effects of gas retention time and filling depth of a compost-based biofilter on removal of vapor phase gasoline and to suggest operational improving method. Gas empty bed retention times(EBRTs) were 4, 10, and 20 minutes, respectively. EBRT of over 10 minutes was required in both cases of TPH(total petroleum hydrocarbons) and BTEK (bezene, toluene, ethylbenzene, and xylene). Filling depths were 25, 50, 75, and 100cm, respectively. To treat gasoline TPH effectively, controlling other operational parameters including EBRT and gas loading rate was more important than increasing filling depth simply. 1m filling depth was sufficient in treating BTEX without controlling other operational parameters greatly.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.25-33
• /
• 1999

The recent emergence of biofiltration as a cost effective waste-gas control technology has stimulated in European countries and the USA. Biofiltration of soil vapor extraction off-gas from gasoline contaminated site was simulated in lab-scale in this study. A filling material used was a compost. This study was conducted to evaluate biofiltration characteristics of the compost material for gasoline off-gas. TPH elimination capacity at the gas loading rate of about 50g/$\textrm{m}^3$((filling material)/hr was circa 40g/$\textrm{m}^3$((filling material)/hr. Removal rate of xylene was the highest among BTEX. while it was the lowest in case of bezene. The maximum elimination capacity of the compost was about 1.5g/$\textrm{m}^3$((filling material)/hr for benzene. More than 95% of trimethylbenzene and naphtalene were removed below the loading rate of 0.7g/㎥(filling material)/hr. About 80% of total TPH and BTEX were removed by biodegradation.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.4-13
• /
• 2000

산업공정에서 배출되는 대기오염물질 및 유독성가스를 제거하기 위한 방법에는 여러 가지가 적용되고 있으나, 본 연구에서는 충전탑을 이용한 흡수원리로써 오염물질을 처리하는데 후력학적 특성에 대해서 연구하였다. 즉 환경보호와 화학공업에서 에너지 절약 측면에 충전탑의 사용이 증가되고 있으며, 충전물의 재료로는 플라스틱, 금속 및 세라믹 등으로 제작되며 종류로는 VSP-ring, Hiflow-ring, Hackette, Top-packing, Envi-pac 등이 있고 사용범위는 정류와 증류, 흡수 및 탈착과 액체와 액체의 추출공정 등에 효율적으로 사용되고 있다. 산업현장에서는 과거에 주로 사용되어온 Intalox-saddle, Rasching-ring, Pall-ring 등의 재래적 충전물은 압력손실과 물질전달, 에너지 절약 및 효율성이 좋은 격자형 충전물의 개발로 인하여 점점 사용이 감소되고 있는 추세이며, 최근에는 합성수지로 제조된 충전물 NSW-ring, Hiflow-ring, Envi-pac 등은 실험 결과에 의해서 재래적인 충전물 Raschig-ring과 Pall-ring보다 높은 상대적인 공간체적과 충전높이에 따른 낮은 압력손실과 함께 높은 부하 한계치에 대하여 효율적이고 가벼운 분리작용에 의한 수력학적 특성이 증명되어졌다. 격자형 충전물이 산업에 적용되기 위해서는 압력손실과 액체함량, 부하 한계치 가스상 또는 액상 물질전달의 특성을 규명하는 것이 중요하다. 따라서 본 연구에서는 가수와 액체의 역류흐름에 의한 수력학적 특성과 물질전달 실험결과를 나타내었다.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.534-544
• /
• 2009

The collapse of the underground cavity can cause the abrupt local subsidence of the ground surface. It can be hazardous to the stability of road and building for human activity. Therefore it is necessary to develop reinforcement methods for the filling of the underground cavity. This study was executed to improve the material quality and systems to fill the calcium-aluminate mineral $(C_{12}A_7)$ environmentally, and minimize the loss of filling materials for the steep underground cavity. Filling material which was developed in this study is composed of rapid hardening material and additives. The developed material had rapid hardening and non-separation ability in the water cavity condition, so it made the effective underground dam in the cavity with prevention of material loss when it was poured in the water cavity. Results of heavy metal leaching test for environmental assessment showed that it was environmentally suiTable material for the filling in the mine cavity.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.99-105
• /
• 2000

The purpose of this study was to show the application of the Biofilter for treatment of the soil contaminated by lead and to investigates the effect of the biofilter on the retardation of lead with pilotplants that were simulated with different media and the number of bed. and to testify the inoculation by seeding microbes. The ratio of the degradation of soil contaminant was verified as CODcr/TOC in order to find a variation of the stabilization index in soil. The Biofiltration was one of biological processing methods for treatment. The contaminants were transported through the biofilter that was filled with the media. The surface of media formed biofilm which was surrounded by microbes and through its boundary, some materials were exchanged and migrated into the cell of microbes in an orderly manner. To investigate the effect of the Biofiltration, contaminated soil with lead nitrate of 1000mg/kg in dry was made artificially. The tests were simulated such as compost, Bioceramic and compost with bioceramic by 7:3 in weight. The bed consisted of three layers in order to find effect of the number of bed. Aspergillus niger was used as a biosorbent could probe the effect on the retardation of lead.

• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.41-48
• /
• 1991

Many of the analyses of the transient radionuclide migration are approximated by an one-dimensional geometry and/or planar geometry. To validate these approximations, one should prove that these are reasonable and proper approximations. In this paper, the approximation which was in the study of the transport through backfill into a fissure is tried to validate. In that analysis, a cylindrical geometry was approximated by a planar geometry. The numerical illustrations show that the planar approximation agrees very well with the result of the cylindrical geometry for a ratio of the backfill outer radius to the waste form radius closed to unity. Even for a larger ratio of the two radii, the numerical difference is relatively small. Also the planar approximation which was used in the analysis gives conservative estimates.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.519-520
• /
• 2018

본 논문에서는 배터리의 온도를 고려하여 효율적으로 고속 충전할 수 있는 방법에 대해 제안하였다. 제안된 방법은 충전하고자 하는 배터리의 온도에 따라 충전에 필요한 전압과 전류의 양을 조절하여 최적의 충전 환경을 만들어 배터리의 수명을 감소시키지 않는 최적의 충전 환경을 제공하는 것이다. 충전으로 인하여 배터리 내부에 있는 전해액, 활물질, 분리막 등의 반응성이 증가되어 배터리의 온도 상승과 수명 단축이 발생되는 현상을 고려하여 배터리의 열 발생으로 저하되는 충전량을 보상할 수 있도록 전압 또는 전류의 량을 조절하여 초기의 충전량을 유지할 수 있도록 하는 고속 충전 방법이다. 제안한 방법의 효율성을 검증하기 위해 리튬이온 배터리를 이용하여 일반적인 충전과 비교하여 실험하였다. 실험 결과 존 논문에서 제안한 방법이 기존의 충전방법보다 고속으로 충전되어 효율성이 입증되었다.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.85-96
• /
• 1999

Biofiltration is an attractive technique for elimination of VOCs and odorous compounds from low-concentration, high-volume waste gas streams because of its simplicity and cost-effectiveness. The objective of this study was to estimate the removal characteristics of Odorous Compounds including $H_2$S, $NH_3$End BTEX in MSW landfill gases. This Study was conducted at Nanjido landfill site. A compost from the Nanjido composting facility was used as a filling material for biofiltration. Extracted landfill gases were injected into biofilter reactors after mixing with air. Experiments were performed in an incubator being set to $20^{\circ}C$ $H_2$S concentrations were monitored at the depths of 25, 50, 75 and 100cm from the bottom Of the biofilter reactors. 98% of $H_2$S was removed at the filling depth of only 25cm. NH$_3$removal rate was about 85%. Toluene removal rate was the highest among BTEX. Significant pH drop of a filling material was not observed during the biofilter operation of 1 month. Without mixing the landfill gas stream with all, the removal rate of $H_2$S decreased down to 30%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.243-247
• /
• 2009

Primary charging roller is rotated with contacting surface of OPC drum and take charge OPC drum. Owing to this reason, primary charging roller is made by elasticity substance with electric conduction. Properties of charging and image is changed by class of coating, method of coating and environment. This study developed coating material and coating method to make print image of good quality.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.159-167
• /
• 1999

Sandwich injection molding is one of the remarkable polymer processes recently developed from conventional injection molding. But it is almost impossible to do theoretical investigation that we've researched it through numerical simulation. In this paper, numerical simulation on the study of sandwich injection molding is based on Finite Element Method and FAN/Control Volume method. In addition to conventional filling parameter that can confirm skin polymer melt front, new filling parameters have been introduced to confirm core polymer melt front advancement. These filling parameters are defined in each layer which is divided to solve temperature field along the thickness direction. One can notice different filling patterns resulted from the variation of material properties such as viscosities and power-law indexes, and processing conditions such as switch-over times and wall temperatures. It gives us a better understanding of the sandwich injection molding process. And we can recognize that it's the core polymer spatial distribution after the completion of filling that is the most important key point to use this process for industrial molding process.