• Tunnel and Underground Space
• /
• v.24 no.5
• /
• pp.373-385
• /
• 2014

Hydraulic filling methods are widely applied to suppress the land subsidence recently. But the research on high-efficiency hydraulic filling to protect the land subsidence is rare. In this study, field experiments to improve the efficiency of the hydraulic filling method are performed by changing the property, specification of the filling material and injection pipe. The filling amounts using vertical injection pipe, reducing tee (${\phi}100mm$) pipe, reducing tee (${\phi}80mm$) pipe and reducing tee (${\phi}50mm$) pipe showed 28.84 ton, 42.62 ton, 53.33 ton, and 63.33 ton respectively. The filling rates using reducing tee (${\phi}100mm$) pipe, reducing tee (${\phi}80mm$) pipe and reducing tee (${\phi}50mm$) pipe showed 47.8%, 84.9% and 119.6% respectively. Filling efficiency can be incresed by using reducing tee. This study shows that simply changing the type of injection pipe is expected to increase the hydraulic filling rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.35-36
• /
• 1997

복합재는 강도가 높고 가볍기 때문에 최근 로켓의 연소관으로 널리 사용되고 있다. 그런데 이 복합재 로켓 연소관은 제조 후 대기 환경에 장기적으로 노출되어 있기 때문에 금속 연소관과는 달리 온도 또는 습도 등의 환경에 대한 영향을 고려해야 한다. 더구나 연소관은 내부에 추진제가 충전되어 있으므로 추진제의 기계적 특성이 습도에 민감함을 생각할 때 강도뿐만 아니라 습기의 투과도 또한 매우 중요한 고려 요소가 된다. 그러나 온/습도 변화에 따른 복합재 자체의 재료 특성 변화에 대한 연구는 많이 보고되었으나 습기의 투과 정도에 관한 연구는 자료가 미흡한 실정이다. 한편, 포화 함수율은 복합재에 따라서 차이가 있으나 T300/5208의 경우 문헌을 참조하면 20-$50^{\circ}C$에서 복합재 무게의 약 1.5% 정도이며 포화에 걸리는 시간은 약 100일 정도로 나타나 있다.본 연구에서는 수분이 복합재를 통하여 투과되는 정도를 고찰하기 위하여 $20^{\circ}C$,95%RH의 온/습도를 유지하는 수조를 제작하였고, 이 수조내에 보관한 복합재 연소관의 실린더 벽면으로 투과되는 습기를 측정하기 위하여 연소관 내에 습도 센서를 투입하여 상대습도를 직접 측정하였다. 복합재 연소관이 로켓에 사용될 때는 연소관 외부에 페인트로 피막 처리하고 연소관 내부에도 추진제와의 사이에 라이너가 접착되어 있어서 수분 침투 및 온도 등의 외부 환경조건에 견디기에 더 양호한 조건이나 본 연구에서는 복합재 자체의 특성을 고찰하기 위하여 섬유를 에폭시에 함침시켜 winding한 상태 그대로의 복합재 연소관 시료를 사용하였다. 습기의 투과는 내부에 라이너/인슐레이션이 피복되거나 또는 추진제가 충전된 경우 많은 감소효과를 보였다. 순수 복합재 연소관의 경우 수조에 넣고 평형에 도달한 후로부터 약 8개월의 습기 투과 상태를 볼대 벽면을 통하여 들어가는 water vapor flux는 $20^{\circ}C$,95%RH 에서 평균적으로 9.3163$\times$$10^{-8}$g/$m^2$sec로 나타났다. 이때 습기가 투과되는 연소관이 국지점을 평판으로 가정하고 Fick's law를 이용하여 구한 습기에 대한 복합재의 확산계수는 D=2.5$\times$$10^{-6}$$mm^2$sec였으며, 이는 다른 graphite/epixy 복합재의 확산계수와 유사한 값을 나타내고 있다. 또한 추진제가 충전된 연소관을 절단하여 밀폐한 후 95%RH 습도 조건에 보관함으로써 연소관 내부의 추진제 기계적 특성에 미치는 침투된 습기의 영향도 함께 고찰하였다. 추진제에 따라 차이는 있겠으나 추진제가 충전된 연소관은 순수 복합재 연소관에 비해 습기의 투과 정도가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.107-115
• /
• 1998

This paper deals with the study on injection with EPDM(Ethylene propylene dien ter polymer) the gap which narrow, long, and tubular between an ablative composite tube and a steel motor case. Small size motor assembly was designed and manufactured for man-portable air defense propulsion system. Motor assembly is consisted with steel tube, ablative composite tube and insulation rubber. Ablative composite tube was made of carbon/phenolic prepreg by rolling process and insulation rubber was made of EPDM by TPM(Trans-power molding) process. To select the insulation rubber material, we tested ablative insulation property and degradation property at first and we tested fluidity, adhesive property and hardness of EPDM rubber. Finally we designed TPM process to manufacture motor case assembly and the motor case assembly was examined by non-destructive test(X-ray).

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.403-411
• /
• 2012

In recent, the using of the hydraulic filling method has increased on the underground reinforcement of the abandoned mine in Korea, however it is the lack of research on the efficient filling method. In this study, tank model tests and field tests were conducted for development of tip device for filling efficiency improvements on the hydraulic filling method. In tank model experiments, the filling efficiency was evaluated according to the form and angle of the nozzle on tip device in the same condition. Then tip device model designed by tank model tests was applied to the field experiment. As a result, the amount of filling of nozzle $90^{\circ}$ tube is increased by approximately 18% compared to the common vertical injection pipe. The angle of repose was $30.82^{\circ}$. Filling hole spacing in the field is usually designed from 5m up to 10m assumed to be $40^{\circ}$ of the angle of repose. According to the results of this study, it is possible that the filling hole spacing expands at least 10m up to 15m applied to be $30^{\circ}{\sim}35^{\circ}$ of the angle of repose. Therefore, it is expected to be economical and efficient mine filling.

• The Korean Journal of Rheology
• /
• v.9 no.2
• /
• pp.73-80
• /
• 1997

분말 입자 형태가 다른 2가지 스테인레스 강(SUS 316L)분말과 조성이 다른 2가지의 결합제를 이용하여 분말충전율의 변화를 가지도록 제조된 5가지 분말사출재에 대한 Bagley 보정 실험을 실시하여 Bagley 보정값에 대한 온도, 분말충전율, 분말 입자 형태 그리고 결 합제의 영향을 조사하였다. Bagley 보정값을 구하기 위한 자료 처리를 하는 과정에서 길이 가 긴 모세관(L/D=60) 의 압력손실이 Thixotropy에 의해서 감소한 현상을 발견하였다. 이는 모세관 점성측정기를 이용한 분말사출제의 점도 측정시 길이가 긴모세관의 사용이 바람직하 지 못하다는 것을 나타낸다. 분말사출재의 Bagley 보정값에 대한 온도와 결합제의 영향은 매우 미약하게 나타났는데 특히 결합제의 영향은 거의 나타나지 않는 것을 발견하였다. 분 말충전율과 분말 입자 형태의 Bagley 보정값에 대한 영향은 매우 크게 나타났으며 분말충 전율이 증가할수록 Bagley 보정값이 증가하고 분말 입자의 형태가 불규칙한 분말을 사용한 분말사출재의 보정값이 구형의 분말에 비해 높은 보정값을 나타냈다. 실험결과에 대한 고찰 결과, 분말사출재의 모세관 입출구에서 압력손실의 주 원인은 분말 이자간 마찰과 충돌이라 고 판단되었다.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.863-868
• /
• 1995

We have prepared microcolumns made of stainless steel tubing, glass-lined stainless steel tubing, and silica-lined stainless steel tubing and examined their performances comparatively. The length of columns was fixed as 30 cm, and the I.D.'s, either 1 mm or 0.5 mm. Octadecyl bonded silica paticles $(5\mu)$ were used as the stationary phases. p-Nitroaniline, N,N-dimethyl-o-nitro-p-toluidine,and ethylbenzene were used as the test solutes. The glass-lined or silica-lined stainless steel columns showed better performances than the plain stainless steel column did. The number of theoretical plates over 10,000 were obtained even for the 0.5 mm I.D. (30 cm long) column as long as the glass-lined stainless steel tubing was used.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.1
• /
• pp.71-79
• /
• 2001

The concrete filled tubular(CFT) columns have many excellent structural properites. such as high compressive strength high ductility and high absorption capacity However the confinement effect and limiting width-thickness ratio of CFT column have not yet been clarified. Therefore. this paper aims to clarify the confinement effect of steel tubes and strength of concrete filled steel tubular columns. And this paper presents results of a probabilistic analysis based on statistical data for strength of concrete filled steel tubular columns which has been tested in Korea for recent 10 years(1991.1~2000.6).

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.82-85
• /
• 1992

Sterols in mayonnaise were determined by the gas liquid chromatographic(GLC) analysis using two different columns, packed column(silicone SE30) and fused silica capillary column(CBPl). Four kinds of sterol(cholesterol, campesterol, stigmasterol and ${\beta}-sitosterol$) were detected in mayonnaise. The method using capillary column proved to be superior in rapidity, reproducerbility and separability for the determination of sterols. The ranges of concentration of egg york in mayonnaise predicted from cholesterol content using packed and capillary columns were $2.69{\sim}7.11%\;and\;2.42{\sim}6.08%$, respectively. Analyzing the composition of campesterol, stigmasterol and (${\beta}-sitosterol$ in mayonnaise, it could be known that soybean oil and cottonseed oil are commonly used for the manufacture of mayonnaise.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.823-829
• /
• 2014

In the present study, simple models were proposed to predict the capillary-driven flow length in a surfactant-added poly(dimethylsiloxane) (PDMS) rectangular microchannel. Owing to the hydrophobic nature of PDMS, it is difficult to transport water in a conventional PDMS microchannel by means of the capillary force alone. To overcome this problem, microchannels with a hydrophilic surface were fabricated using surfactant-added PDMS. By measuring the contact angle change on the surfactant-added PDMS surface, the behavior was investigated to establish a simple model. In order to predict the filling length induced by the capillary force, the Washburn equation was modified in the present study. From the investigation, it was found that the initial rate-of-change of the contact angle affected the filling length. Simple models were developed for three representative cases, and these can be useful tools in designing microfluidic manufacturing techniques including MIcroMolding In Capillaries (MIMIC).

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.47-53
• /
• 1988

The objective of this study is to evaluate the reliability of the High Head Safety Injection System (HHIS) of KNU 5, 6, 7 and 8 following the removal of safety injection signal (s-signal) from the mini-flow bypass line valves of charging/safety injection pumps. The unavailability of HHSIS and the rupture probability of a charging/safety injection pump have been computed for two different cases; with s-signal on and removed. The results show that when the s-signal is removed from the mini-flow bypass line valves, the unavailability of HHSIS slightly increases while the rupture probability of a charging/safety injection pump is significantly reduced. Hence, based upon the results of this study we conclude that it is more reasonable to remove the s-signal from the mini-flow bypass line valves of KNU 5, 6, 7 and 8 in the normal plant operation. And to improve the availability of HHSIS, the modification of operational procedures and the emphasis on operator training are recommended.