• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.202-203
• /
• 2016

선박 조우 시 레이더, ARPA, AIS, ECDIS 등 기존 항법장치는 정량적으로 충돌의 위험을 판단할 수 있도록 도와주고, 최선의 피항동작을 취할 수 있도록 도와주었다. 이러한 장비들은 대부분 DCPA와 TCPA를 반영한 것이다. 하지만, 피항을 위한 마지막 결정을 내리는 것은 사람인 해기사이기 때문에 충돌사고는 지속적으로 발생하고 있고, 이 때문에 해기사에 대한 연구가 진행되고 있다. 최근에는 선박조우 시 해기사의 심리상태를 스트레스나 생체 반응을 통해 측정하고자 하는 연구가 진행되고 있다. 해기사의 심리상태를 반영한 항법장치가 있다면 기존 항법장치의 단점을 보완하고 새로운 해양사고 예방 개념이 도출할 수 있을 것이다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.27-33
• /
• 1995

본 고에서는 선박의 충돌 및 좌초시 선체구조의 파괴에 관한 연구중에서 최근에 보고된 것을 중 신으로 자료조사를 수행함으로써 이 분야의 최신 연구동향을 분석하고자 한다. 그러나, 오래전에 수행된 연구성과일지라도 현재까지 유용한 정보를 제공하고 있다고 판단되는 연구성과는 본조 사에 포함시켰으며, 최근에 수행된 연구도 나열식으로 조사하기 보다는 대표적인 것만을 대상 으로 하였기 대문에 본 조사에 포함되지 않은 연구성과중에도 유용한 결과를 주는 것이 다수 있음은 물론이다. 충돌 및 좌초시 선체구조는 소성, 파단(rupture), 찢김(tearing), 마찰접 촉(frictional contact), 대변형/대회전, 압괴(crushing)등 복잡한 비선형구조응답을 나타내며, 이 문제의 분류방법에는 여러 가지가 있으나, 본고에서는 다음에 나타내고 있는 바와 같이 통상적 으로 분류하고 있는 방법에 따라 연구성과들을 조사 분석하였다.

• Review of KIISC
• /
• v.5 no.3
• /
• pp.38-48
• /
• 1995

다단계 보안 데이타베이스 관리체계(Multi-Level Secure Database Management System: MLS/DBMS)에서 모든 거래와 데이타는 각각 유일한 보안성을 가지고 있다 MLS/DBMS 상에서 동시수행중인 거래들은 공유 데이타를 접근하는 과정에서 충돌가능성을 항시 지니고 있다. 이러한 충돌을 해결하는 과정에서 만약 낮은 보안등급을 가지는 거래가 지연되는 현상이 발생하였을 경우, 높은 보안등급의 정보가 낮은 보안등급의 거래로 유출되어 결과적으로 보안정책을 위반하게된다 이러한 종류의 통신경로를 비밀경로라고 한다. 비밀경보 문제를 해결하기 위한 몇몇 종류의 거래관리 기법들이 제시되었다. 이들 기법들은 비록 비밀경로 문제를 해결하였지만, 불행하게도 이들은 보안의 또 다른 측면인 무결성에 대한 고려를 간과하고 있다. 본 논문에서 제안하는 고수준 보안 거래 관리기는 동시에 수행중인 거래들을 스케줄링하는 과정에서 정보의 기밀성 유지를 무결성의 손실없이 이루고 있다. 기밀성을 위하여 고수준 보안 거래관리기는 비완료된 데이타의 은닉에 방법적 기반을 두고 있다. 또한, 무결성을 얻기 위하여 데이타의 적절성을 판단하는 과정에서 데이타의 신뢰성을 최신성과 함께 고려하고 있다.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.19-29
• /
• 2019

Recently, autonomous vehicles have been studied actively. Autonomous vehicles can detect objects around them using their on board sensors, estimate collision probability and maneuver to avoid colliding with objects. Many algorithms are suggested to prevent collision avoidance. However there are limitations of complex and diverse environments because algorithm uses only the information of attached environmental sensors and mainly depends on TTC (time-to-Collision) parameter. In this paper, autonomous driving algorithm using I2V communication-based cooperative sensing information is developed to cope with complex and diverse environments through sensor fusion of objects information from infrastructure camera and object information from equipped sensors. The cooperative sensing based autonomous driving algorithm is implemented in autonomous shuttle bus and the proposed algorithm proved to be able to improve the autonomous navigation technology effectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.101-106
• /
• 2010

Marine transportation system plays an important role in maintaining and promoting economic activities among countries. The accurate understanding of marine traffic flows are necessary for the further advancement of marine transportation system. While many existing researches on marine traffic have been conducted mainly on the basis of statistical analysis using traffic data, ship's traffic flow simulation model was developed in this study. A collision avoidance algorithm was conducted with categorizing of traffic factors such as ship's length and speed. The developed model was also verified by a simulation process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.87-96
• /
• 2006

A ship collision analysis by finite element method is performed considering the effects of mass and speed of ship and material and shape of structures to analyze the dynamic characteristics by ship collision. From this analysis, collision load-time history and damage of ship and structures are obtained. In this study, results of finite element analysis are compared with previous studies in USA, Japan and some countries of Europe. Dynamic characteristics are different from each other according to interaction between ship and structures. It seems that there are lots of factor to have effects on the ship-structures interaction. Because little information is available on the behavior of the inelastic deformation of materials and structures during the type of dynamic impacts associated with vessel impact, assumptions based on experience and sound engineering practice should be substituted. Therefore more researches on the interaction between ship and structures are required.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.591-599
• /
• 2011

This study investigates influencing factors on numerical crash simulation between RC slab and soft projectile using explicit dynamic method. Considered experimental test is the MEPPEN II/4 test, which has been conducted at the end of the years 70' in Germany as one of the numerous experimental test related to design of nuclear power plants. LS-DYNA software is adopted for numerical study, and influencing factors such as constitutive model of concrete, strain rate effect of steel and concrete, support modeling method, etc. are investigated. More reasonable simulation results can be achieved through appropriate consideration of these factors, especially of constitutive model of concrete material since this factor affects most among the investigated factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3647-3653
• /
• 2010

An experimental investigation of the flame appearance and heat transfer characteristics in both unexcited and excited impinging inverse diffusion flames with a loud speaker has been performed. The flame is found to become broader and shorter (in length) with acoustic excitation. The heat flux at the stagnation point is increased with the acoustic excitation. The acoustic excitation is more effective in lean conditions than in rich conditions. The reasons for these behaviors are that acoustic excitation improves the entrainment of surrounding air into the jet. From this study, it is found that the maximum increase of 57% in the total heat flux is obtained at the stagnation point of $\Phi$=0.8. Therefore, it is ascertained that the excitation combustion can be adopted with effective instruments as a method for improving heat transfer in impinging jet flames.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.9-14
• /
• 2005

For the understanding the locus of the Quinling-Dabie-Sulu continental collision's boundary and the underground structure of the sedimentray basin in the Yellow Sea, three dimensional density modelling is carrid out by using gravity dataset (Free Air Anomaly), which is measured by Tamhae 2, KIGAM in a period 2000 - 2002. The measured gravity anomaly in the investigations area is mainly responsed by depth distribution of the sedimentary basin. After comparing the sea-measured gravity data to CHAMP-GRACE satellite gravity data, I suggested that the high density model bodies extend mainly from the southern part of China to the middle-western part of the Korean Peninsula., which might be emplaced along the continental collision's boundary. The total volume of very low density bodies modified by modelling might be about $20000\;km^3$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.113-116
• /
• 2008

According to a domestic provision, test levels of the barrier are divided into seven categories(SB1 to SB7) and the corresponding crash conditions are specified. Meanwhile, standard types of concrete barriers with different dimensions have been constructed nation wide. Some studies aimed at finding a proper test level of each type of the concrete barrier have been carried out, but the reliable and consistent results have not been fully established yet. The purpose of this study is to find out the test level corresponding to the concrete barrier of type-2 through static test. AASHTO LRFD was referred to for the loading pattern and a magnitude of the load that simulate a vehicle crash assumed. The test results show that the ultimate strength of the type-2 satisfies the load level required for SB5. However, it seems that the type-2 does not comply with SB6, showing some differences in results from previous analytical studies. In order to take advantage of the static test in establishing the test level of the domestic barrier, more detailed provisions should be specified.