• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.147-152
• /
• 2002

In the preceding tests of Sub.(Ⅰ) engines, it was observed that the heat resistant capability of the engines was not enough, and the design of Sub.(Ⅰ) engines was modified to satisfy the mission requirement. Sub.(Ⅰ) Mod. engines have three major design parameters - the arrangement of main injectors, the impinging angle of main injectors and thermal barrier coating. More than 20 experiments were carried out to evaluate engine performance and heat resistance capability with respect to design parameters. Analysing the result of Sub.(Ⅰ) and Sub.(Ⅰ) Mod. engine tests, it is found that the decreased impinging angle, adopting the H-type arrangement(rather than radial type arrangement), and adopting the thermal barrier coating can increase heat resistance capacity substantially. The result show that the performance variation by design change is below 5 percents and the radial type arrangement of injectors has higher performance than H-type. However, the performance of 15°impinging angle engine is higher than that of 20°impinging angle engine, which is inconsistent to our expectation. High frequency instabilities may cause such phenomenon, which will be verified by a series of tests.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.5
• /
• pp.77-83
• /
• 2009

In this parer, an improved backoff algorithm is proposed by supplementing a multiple of persistence factor for IEEE 802.11 Wireless LAN MAC. This algorithm is proposed to complement the shortcomings of the conventional BEB (Binary Exponential Backoff) algorithm which is used for retransmission to control a new contention window in DCF/EDCF MAC. In channel utilization, collision rate and Goodput viewpoint, we analysis the improved backoff algorithm and compared the result with that of the conventional algorithm In this result, we showed that the performance for PFA backoff algorithm is 10% higher than that for the conventional BEB algorithm when the number of station is 40.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.33-43
• /
• 2013

This paper proposes a distributed MAC protocol called Carrier Sensing Multiple Access with Collision Resolution (CSMA/CR) considering fully-connected single hop network environments for next-generation wireless LAN with high density of stations. The proposed CSMA/CR is compatible with the conventional MAC protocols by observing the operation of CSMA/CA and is able to detect a collision promptly without RTS/CTS exchange by applying the technique of CSMA/CD to wireless environments. Moreover, once a collision is detected, the dedicated resource is allocated to the next transmission and so the collision that may occur again is resolved. We investigate some implementation issues for the practicality of CSMA/CR and compare it with the typical distributed MAC protocols. The simulation results show that the proposed CSMA/CR has a low overhead as detecting a collision without the RTS/CTS exploitation and achieves always the best throughput regardless of the number of access stations, by using the reservation-based collision resolution technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.611-619
• /
• 2016

This paper proposes a collision prevention system for an agricultural unmanned helicopter. The collision prevention system consists of an obstacle detection system, a mapping algorithm, and a collision avoidance algorithm. The obstacle detection system based on a LiDAR sensor is implemented in the unmanned helicopter and acquires distance information of obstacles in real-time. Then, an obstacle mapping is carried out by combining the distance to the obstacles with attitude/location data of the unmanned helicopter. In order to prevent a collision, alert is activated to an operator based on the map when the vehicle approaches to the obstacles. Moreover, the developed collision prevention system is verified through flight test simulating a flight pattern aerial spraying.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.300-310
• /
• 2008

Through this study, a conceptual design for the next generation high-speed EMU has been derived to meet the crash worthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulations require some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 km/h, and a collision against a standard deformable obstacle of 15 ton at 110km/h. The complete train set will be composed of 2TC-6M with 13 ton axle load, which is different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, a crashworthy conceptual design was derived in terms of mean crush forces and energy absorptions for principal crushable structures and devices. The derived conceptual design was evaluated and improved using one dimensional dynamic simulations for the bar-spring-damper-mass model. It is shown from the simulation results that the suggested conceptual design can easily satisfy domestic crashworthiness requirements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1503-1510
• /
• 2012

This paper presents an Integrated Risk Management System (IRMS), which is designed to integrate longitudinal and lateral collision avoidance systems. Indices representing longitudinal and lateral collision risks are designed. From the designed indices, an integrated control strategy is designed. A collision avoidance algorithm is designed to assist the driver in avoiding collisions by using a vehicle-driver-controller integrated linear model. The performance of the proposed algorithm is investigated via computer simulations conducted using the vehicle dynamics software CARSIM and Matlab/Simulink.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.33-39
• /
• 2010

In this paper, we propose an improved anti-collision algorithm. We have designed an anti-collision unit using this algorithm for the 18000-6 Type C Class 1 Generation 2 standard (Gen2). The Gen2 standard uses a Q-algorithm for incremental method on the Dynamic Slot-Aloha algorithm. It has basically enhanced performance over the Slot-Aloha algorithm. Unfortunately, there are several non-clarified parts: initial value. If an incorrect value is selected, it causes degradation in performance. To increase throughput and system efficiency, and to decrease tag identification time, we propose an improved anti-collision algorithm. prorosed Q algorithm has an increment of 5% of system efficiency and a decrement of 9% of tag identification time.

• Journal of Digital Contents Society
• /
• v.9 no.1
• /
• pp.61-67
• /
• 2008

In this paper, MAC algorithm for the IEEE 802.11 DCF improving the performance is proposed and analyzed by simulation. The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF(Distributed Coordination Function) and PCF(Point Coordination Function). The DCF controls the transmission based on CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance), that decides a random backoff time with the range of CW(Contention Window) for each station. Normally, each station increase the CW to double after collision, and reduces the CW to the minimum after successful transmission. The DCF shows excellent performance relatively in situation that competition station is less but has a problem that performance is fallen from throughput and delay viewpoint in situation that competition station is increased. This paper proposes an enhanced DCF algorithm that increases the CW to maximal CW after collision and decreases the CW smoothly after successful transmission in order to reduce the collision probability by utilizing the current status information of WLAN. To prove efficiency of proposed algorithm, a lots of simulations are conducted and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1229-1237
• /
• 2006

IEEE 802.11 has employed distributed coordination function (DCF) adopting carrier sense multiple access with collision avoidance (CSMA/CA). To effectively resolve collisions, DCF uses binary exponential backoff (BEB) algorithm with three parameters, i.e., backoff stage, backoff counter and contention window. If a collision occurs, stations involving in the collision increase their backoff stages by one and double their contention window sizes. However, DCF with BEB wastes wireless resource when there are many contending stations. Therefore, in this paper, to enhance the performance of wireless LAN, we propose binary negative-exponential backoff (BNEB) algorithm which maintains a maximum contention window size during collisions and reduces a contention window size to half after successful transmission of a frame without retransmissions. For IEEE 802.11, 802.11a and 802.11b standards, we also compare the performance of DCF with BEB to that with BNEB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1041-1049
• /
• 2012

The transactional memory was proposed to solve the problems of the conventional lock-based synchronization methods in the shared memory multiprocessor system. Various implementation methods for putting the high performance transactional memory to practical use have been continuously studied. However, these studies focus only on the commercialization and performance enhancement of the transactional memory. Besides, there have been few studies to analyze the system overhead of the transactional memory according to the conflict management policy. Thus this paper classifies hardware transactional memory, which is one kind of transactional memories, into four types according to the conflict management policy, and then compares and analyzes their performance and system bus traffic through their modeling and simulation. In addition, the most effective conflict management policy for the hardware transactional memory is presented through these comparison and analysis.