• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.51-54
• /
• 2005

최근 도로 네트워크 환경에서 날로 증가하는 교통 수요를 충족시키고 각종 교통 문제를 해결하기 위해서 지능형교통시스템(ITS, Intelligent Transportation System)을 적용하고 있다. 특히, 첨단교통정보 시스템(ATIS, Advanced Traveler Information System)은 개별 차량의 주행을 최적화시키는 시스템으로서 운전자에게 출발지에서 목적지까지 빠르고 쾌적한 주행경로를 제공하는 차량 경로계획 수립을 제공한다. 하지만 이러한 시스템은 도로 구간의 비용으로 정적인 값을 이용하므로 동적으로 변화하는 구간 비용을 가지고 도로 네트워크에서 최단 경로를 제공하기는 어렵다. 따라서, 이 논문에서는 교통 혼잡을 고려한 최단 경로 탐색 연산자를 제안한다. 제안된 연산자는 현재 시간 비용과 과거의 시간 비용 변화 량을 더하여 출발지에서 목적지까지 경로를 탐색하는데 이용한다. 이러한 방법은 시간에 따라 변화하는 도로의 상황을 반영하며 출발지에서 목적지까지의 최단 경로뿐만 아니라 예상 도착 시간을 추정할 수 있다. 또한 제안된 연산자는 효율적인 도로 이용, 물류비용 감소, 응급 상황 대체, 연료 절약 및 환경 오염 감소 등의 장점을 가지며 첨단교통정보시스템에서 응용 될 수 있다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.201-202
• /
• 2015

과거 연료소모량과 오염물질 배출량을 추정하기 위한 연구에서는 주로 속도변수를 이용하였으나, 속도의 변화에 따른 연료소모량 및 오염물질 배출량의 변화를 올바르게 반영하지 못하는 문제점이 대두되었다. 이러한 문제점을 극복할 수 있는 대안으로 평가받는 것이 가속도이다. 이처럼 가속도 변수가 중요하게 다루어지고 있으나 여전히 연료소모량이나 오염물질 배출량과 관련하여 급가속을 판단할 만한 기준이 모호하다. 이에 본 연구에서는 연료소모 및 $CO_2$ 배출량을 증가시켜 급가속으로 판단할 수 있는 가속도 임계치를 추정하고자 하였다. 가속도 임계치 및 모형추정을 위해 LPG 중형 승용차량에 장착한 차량 정보 저장장치로부터 가속 주행실험시 수집한 실시간 데이터를 수집 분석하였다. 가속의 특성상 동일한 가속도라 할지라도 정지상태인지 여부에 따라 동일한 가속도에 대한 연료소모량, $CO_2$ 배출량이 상이하게 나타난다. 따라서 실험을 통해 정지상태에서 가속시 관성을 극복하기 위한 동력이 요구되는 속도의 범위를 확인하고 이중 출발 가속주행시 임계가속도를 도출하였다. 가속 주행실험 결과 연료소모 및 $CO_2$ 배출 증가량이 급격히 증가되는 임계가속도를 도출하기 위해 CART 분석을 이용하였으며, 그 결과 정지 상태에서 가속하는 경우 $2.598m/s^2$, 의 가속도가 연료 및 $CO_2$ 배출량을 크게 증가시키는 임계 가속도인 것으로 추정되었다.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.652-657
• /
• 2014

Given a starting point, destination point and various Points Of Interest (POIs), which contain a full or partial order, for a user to visit we wish to create, a sequenced route from the starting point to the destination point that includes one member of each POI type in a particular order. This paper proposes a method for finding the approximate shortest route between the start point, destination point and one member of each POI type. There are currently two algorithms that perform this task but they both have weaknesses. One of the algorithms only considers the distance between the visited POI (or starting point) and POI to visit next. The other algorithm chooses candidate points near the straight-line distance between the start point and destination but does not consider the order of visits on the corresponding network path. This paper outlines an algorithm that chooses the candidate points that are nearer to the network path between the start point and destination using network search. The algorithm looks for routes using the candidate points and finds the approximate shortest route by assigning an adaptive priority to the route that visits more POIs in a short amount of time.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.292-300
• /
• 1997

In this study PZT powders were prepared with shapes of cubic by hydrothermal synthesis with various starting materials, and the sintering characteristics of the powders were investigated. The particle shapes were cubic regardless of starting materials, but the mean size of particles formed using $Pb(NO_3)_2$, $Ti(OC_4H_9)_4$ and $Zr(OC_4H_9)_4$ was relatively smaller than that of particles prepared from other starting materials. Agitation of the feedstock during hydrothermal reaction results in decreasing the required reaction temperature for the formation of nuclei, and in increasing the size of product particles. XRD results showed that the major phase of PZT crystal powders was a tetragonal phase at the Zr to Ti ratio of 40 to 60, or a rhombohedral phase at its ratio of 60 to 40. The density of a sintered body made from the hydrothermal powders in PbO surrounding varied with sintering temperatures and with periods of sintering time. The experimental results also showed that the optimum sintering condition was at $1150^{\circ}C$ for a 2hr sintering, and that the density of a sintered body was $7.6g/cm^3$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.10-21
• /
• 2008

User travel behavior is based on the existence of complete traffic information in deterministic user optimal principle by Wardrop(1952). According to deterministic user optimal principle, users choose the optimal route from origin to destination and they change their routes arbitrarily in order to minimize travel cost. In this principle, users only consider travel time as a factor to take their routes. However, user behavior is not determined by only travel time in actuality. Namely, the models that reflect only travel time as a route choice factor could give irrational travel behavior results. Therefore, the model is necessary that considers various factors including travel time, transportation networks structure and traffic information. In this research, more realistic deterministic optimal traffic assignment model is proposed in the way of route recognizance behavior. This model assumes that when users decide their routes, they consider many factors such as travel time, road condition and traffic information. In addition, route recognizance attributes is reflected in this suggested model by forward searching method and backward searching method with numerical formulas and algorithms.

• Journal of the Korean Institute of Gas
• /
• v.13 no.5
• /
• pp.1-6
• /
• 2009

This paper presents the fuel consumption effects of LPG vehicle depending on the atmospheric temperature, LP gas leakage of vaporizer, viscosity of engine oil and engine load conditions. The fuel consumption test results show that when the temperature of engine temperature rises, the fuel consumption efficiency increases in general. The fuel consumption efficiency for an atmosphere temperature of $24.2^{\circ}C$ is 13.6% high compared to that of $1^{\circ}C$. No leak vaporizer on fuel consumption efficiency is 5.3% high compared to that of the LP gas leak vaporizer. The fuel economy of new engine oils is just 1.1% high compared to that of used oils with a LPG vehicle mileage of 9,500km. This is not an influential factor compared with an atmospheric temperature and a LP gas leakage. The more important factors on the fuel consumption efficiency are driving conditions such as a rapid braking, abrupt start and fast acceleration. The test results indicate that the normal start is 32.3% high compared to that of an abrupt start and the fast acceleration is 10.8% high compared with that of an abrupt start. And the fuel consumption efficiency for a rapid braking is 18.3% higher than that of an abrupt start. These indicate that the driving condition is very important to reduce the fuel consumption rate.

• TTA Journal
• /
• s.65
• /
• pp.116-117
• /
• 1999

지난 1999년 4월 8$\~$9일 전기통신개발자문그룹(TDAG:Telecommunication Development Advisory Group)은 새로운 명칭으로 첫 회의를 가졌다.

• Science & Technology Policy
• /
• v.6 no.12 s.93
• /
• pp.28-32
• /
• 1996

• The Science & Technology
• /
• no.1 s.464
• /
• pp.94-95
• /
• 2008

• Bulletin of Korea Environmental Preservation Association
• /
• s.390
• /
• pp.30-34
• /
• 2010