• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.232-233
• /
• 2013

본 발표에서 2012년 나노융합산업원천기술개발사업 꼭지로 연구개발을 수행하고 있는 "외부 충전없이 반영구적으로 사용이 가능한 10 mWh/cm2급 동위원소기반 전고상(全固相) 하이브리드 전지 원천기술 개발" 사업의 핵심내용을 간략히 소개하고자 한다. 본 과제의 핵심내용은 국내 유일의 원자로인 하나로의 중성자 빔라인을 이용하여 ${\beta}$-선을 방출하는 동위원소파우더를 생산하고, 방출되는 ${\beta}$-선을 효율적으로 흡수할 수 있는 PN-접합 전지구조에 노출시켜 2차적인 e-h 쌍을 생성시키고, 분리시키고 전극으로 포집하여 전력을 생산하는 한국형 동위원소전지 개발에 있다. 더하여 실시간으로 생성되는 미세한 출력전력을 증폭시켜 저장할 수 있는 고효율 전고상 이차전지와 전력제어회로를 포함하는 한국형 하이브리드전지관련 원천기술 개발관련 세부 사업내용을 소개함으로 관련분야 연구에 대한 국내관심을 환기시켜 관련기술개발을 촉진하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.514-524
• /
• 2016

This work suggests a study on 5 kW plasma power supply design and reactor capacitance estimation algorithm for a wide range of linear output control to operate a plasma reactor. The suggested study is designed to use a two-stage circuit and control the full-bridge circuit of the two-stage circuit using the buck converter output voltage of the single-stage circuit. The switching frequency of the full-bridge circuit is designed to operate through high-frequency switching and obtain maximum output using LC parallel resonance. Soft switching technique(ZVS) is used to reduce the loss caused by high-frequency switching, and duty control of the buck converter is applied to control a wide range of linear output. The internal capacitance of the reactor cannot easily be extracted, and thus, the reactor cannot be operated in an optimized resonant state. To address this issue, this work designs the internal capacitance of the reactor such that estimations can be performed with the developed reactor capacitance estimation algorithm applied to the internal capacitance of the reactor. A 5 kW plasma power supply is designed for a wide range of linear output control, and the validity of the study on the reactor capacitance estimation algorithm is verified.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2015

In this paper, we develop an intelligent mobile surveillance system based on binary CDMA for the unmanned automatic tracking and surveillance. That is, we implement a intelligent surveillance system using the binary CDMA wireless communication technology which is applied the merit of CDMA and TDMA on it complexly. This system is able to monitor the site of the accident on network in real time and process the various situations by implementing the security surveillance system. This system pursues an object by the 360-degree using camera, expands image using a PTZ(Pan/Tilt/Zoom) camera zooming function, identifies the mobile objects image within a screen and transfers the identified image to the remote site. Finally, we show the efficiency of the implemented system through the simulation of the controlled situations, such as tracking coverage on objects, object expansion, object detection number, monitoring the remote transferred image, number of frame per second by the image output signal etc..

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.19-28
• /
• 2007

We considered the authoritative representations of torpedo systems that was the engagement level model to develop system specifications and to analyze operational requirements on concept design phase. The Work Breakdown Structure(WBS) of models was defined about authoritative representations of the torpedo systems. The communication of information among each subsystems and input/output parameters were defined. In the heavy weight and light weight torpedo model, presetter, underwater maneuver, war head, sonar, guidance and control, propulsion subsystem modeling were developed for heavy-weight and the light-weight torpedo systems. The authoritative representations of torpedo systems have similar structures with those of the engineering level models and could be verified via engagement level simulations according to the V&V process in the future.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.128-133
• /
• 1998

This paper is study on performance analysis of modulator using direct digital frequency synthesizer of Initial Clock Accumulating Method. It has been generally used for PLL or digital frequency synthesizing method to be synthesizd randomly chosen frequency state. In order to improve disadvantage of two methods, we constructed modulator system using DDFS of Initial Clock Accumulating Method. We also confirmed the coherence frequency hopping state and possibility of phase control. The results obtained from the experiments are as follows; First, the synthesized output frequency is proportional to the sampling frequency, according to index, K. Second, the difference of the gain between the basic frequency and the harmonic frequencies was more than 50 [dB], that is, this means facts that is reduced the harmonic frequency factor. Third, coherence frequency hopping state is confirmed by PN code sequence. Here, we confirmed the proposed method cut switching time, this verify facts that is the best characteristic of the frequency hopping. We also verified the fact that the phase varies as the adder is operated set or reset.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.493-502
• /
• 2001

This paper propose a new built-in current sensor(BICS) for current testing that has some advantages compared with conventional logic testing. The designed BICS detects the fault in circuit under test (CUT) and makes a Pass/Fail signal by comparison between CUT current and duplicated inverter current. The proposed circuit consists of a differential amplifier, a comparator and a inverter. It requires 10 MOSFETs and 3 inverters. Since the designed BICS do not require the extra clock, the added extra pin is only one output pin. The mode selection is not used in this circuit. Therefore we can apply the circuit to on-line testing. The validity and effectiveness are verified through the HSPICE simulation of circuits with defects. When CUT is a 8$\times$8 parallel multiplier, area overhead of the BICS is about 4.34%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.130-137
• /
• 2013

This paper presents analog front-end(AFE) circuits for bio-potential measurement. The proposed AFE is composed of IA(instrument amplifier), BPF(band-pass filter), VGA(variable gain amplifier) and SAR(successive approximation register) type ADC. The low gm(LGM) circuits with current division technique and Miller capacitance with high gain amplifier enable IA to implement on-chip AC-coupling without external passive components. Spilt capacitor array with capacitor division technique and asynchronous control make the 12-b ADC with low power consumption and small die area. The total current consumption of proposed AFE is 6.3uA at 1.8V.

• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.62-68
• /
• 2016

Laser welding has superior characteristic such as low distortion, high welding speed, easy automation and real time control. But it is easy to occur weld defects such as porosity, crater, humping bead in the area of welding start and end. These weld defects can be suppressed by applying the wave shape control. In this study CW fiber laser was used for welding of $0.5mm^t$ pure titanium. Penetration properties were evaluated with the time of slope up and down. After then the bead shape was observed, and the maximum depth and the area of crater were measured. The bead shape of welding start area changed to be sharp with increase of slope up time and non-weld area of welding start increased. The crater and humping bead were suppressed with slope down time. The cooling rate of crater area was understood through measure of the hardness. Also, The distribution tendency of alloying elements was observed by EPMA and EDS. When wave shape control didn't applied to weld, the hardness of end weld increased due to rapid cooling rate and the hardness of rear part in the crater was higher than that of fore part. On the other hand, when the wave shape control was used for end weld, the increase of hardness in the end weld couldn't be found due to gradual cooling rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.335-344
• /
• 2004

A low phase noise EQM(Engineering Qualified Model) LO(Local Oscillator) has been developed for Ka-band satellite transponder. A VCDRO(Voltage Controlled Dielectric Resonator Oscillator) is also designed using a high impedance inverter coupled with dielectric resonator to improve the phase noise performances out of the loop bandwidth. The mechanical analysis fur housing and the thermal analysis fur circuit board are achieved. This EQM LO is applied to Ka-band satellite transponder of EQM level after environmental experiments for space application. The LO has the harmonic suppression characteristics above 52 ㏈c and requires low power consumption under 1.3 watts. The phase noise characteristics are exhibited as -101.33 ㏈c/㎐ at 10 ㎑ offset frequency and -114.33 ㏈c/㎐ at 100 ㎑ offset frequency, with the output power of 14.0 ㏈m${\pm}$0.17 ㏈ over the temperature range of -15∼＋65$^{\circ}C$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.689-696
• /
• 2000

In this paper, the cascaded co-channel interference canceller using the dead zone decision is proposed to reduced the co-channel interference in the DS/CDMA communication with the multipath fading and its performance is analyzed. The cancellation scheme creates the replica of the co-channel interference using the data decision of correlator output and removes it at the next stage. The canceller uses the dead zone decision which is detecting strong signal to obtain a good performance in the mobile communication. The results of performance analysis show that the proposed cancellation scheme has the improved performance and the number of user is increased 4 times compared with the conventional receiver, and increased 17% compared with the hard decision. And also the perfect power control is required along with increasing the number of user.