• Journal of Food Hygiene and Safety
• /
• v.34 no.6
• /
• pp.571-575
• /
• 2019

Fungal occurrence during production of dried red pepper was investigated using red pepper samples collected at harvest, before and after washing, and before, during or after drying. Fungal incidence was evaluated by counting the number of fungal colonies grown after incubating random pepper cuts on potato dextrose agar plates. Washing with ground water had no significant effect on reduction of fungal contamination. Fungal increase was observed in some samples, and the insides of washer and containers were contaminated with fungi. Drying caused significant fungal increase regardless of drying method although the fungal incidence after machine drying was lower than that after greenhouse drying. Fungal increase was observed in the samples being dried in a greenhouse and some mycotoxigenic species were also detected. Therefore, the most important control point for fungal contamination during dried pepper production appears to be the drying process, especially in a greenhouse.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.403-409
• /
• 2018

Inconel 713C which of a commercial Ni super alloy have the composition of 70 % Ni, 12 % Cr, 6 % Al and 4 % Mo. Mo is very expensive and have some economic value to recover in the alloy. In this study, liquid-liquid exraction(solvent extraction and stripping) has been performed to separate Mo from the synthetic leaching solution of spent Inconel 713C alloy and prepare to Mo powder by dying, evaporation and heat treatment. The experiments were conducted by using synthetic leaching solution which was prepared $NaMoO_4$ $2H_2O$ by dissolved in distilled water. Alamine336 and Cyanex272 dissolved in kerosene were used as extractants. The extraction percentage of Mo by Alamine336 is 99 % in the condition of the range of pH 1 to 4 and 1 % of concentration of Alamine336. The stripping solutions are used by HCl, $H_2SO_4$ and $HNO_3$ solutions and the concentrations were controlled by distilled water. The concentrations of HCl, $H_2SO_4$ and $HNO_3$ as stripping solutions are increased, the stripping percentages of Mo are increased and the stripping percentage of Mo by $HNO_3$ is higher than other stripping solutions. After liquid-liquid extraction and heat treatment, $MoO_3$ powder which of the purity of 97.5 % was prepared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Korean Journal of Childcare and Education
• /
• v.9 no.2
• /
• pp.117-141
• /
• 2013

The purpose of this study is to investigate the young children's 'more means more' bias and knowledge change process regarding a lever phenomenon, especially the relationship between the weight of an object and the strength of force and between the length of a lever and the strength of force. Subjects, who were presented with the tasks, were eight young children 5 years of age. Major findings were as followings. First, most of the subjects have a 'more means more' bias about the relationship between the weight of an object and the strength of force and between the length of a lever and the strength of force regarding a lever phenomenon. This meant that young children have similar concepts about a lever phenomenon regardless of whether it is right or wrong physically. Second, young children tried to make sure of their knowledge during experiments. They chose the evidence which confirmed their knowledge. But they tried to change their knowledge, when the evidence presented did not correspond to their knowledge. These findings contribute to understanding young children's 'more means more' bias and knowledge change process about a lever phenomenon and can be used in preschool science education programs and curriculums.

• Korean Journal of Childcare and Education
• /
• v.8 no.1
• /
• pp.125-143
• /
• 2012

This study examined the cause of the low fertility rate by the Policy on Childbirth Encouragement demographic of married males, parenting burden, parental role satisfaction, and policy on childbirth encouragement perception. It also explored these factors of having an effect on the Plan to have another Child. The study method involved a survey answered by married males in Seoul, Gyung-gi, Incheon and a total of 188 copies were used for the final analysis. The data analyses used SPSS 12.0 which employs basic statistics, reliability tests, and binary logistic regression. The results were as follows: First, It turns out that couples who don't have many children and when the wife is not that old, particularly have high parental role satisfaction. And when they acknowledge the policy on childbirth encouragement, they tend to choose the 'Both Husband and Wife want to give birth' category. Second, the 'Only wife wants to give birth' category was chosen for those who have a small number of children and when a wife was currently not working and the husband was not satisfied with his parental role. Third, the 'Only husband wants to give birth' category tends to be chosen when couples have a small number of children and especially if the wife is working. Last, it was shown that coupless who have many children choose the 'Both husband and wife don't want to give birth' category.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.807-823
• /
• 2008

This paper presents a technique for estimating discharge rating curve parameters. In typical practical applications, the original non-linear rating curve is transformed into a simple linear regression model by log-transforming the measurement without examining the effect of log transformation. The model of pseudo-likelihood estimation is developed in this study to deal with heteroscedasticity of residuals in the original non-linear model. The parameters of rating curves and variance functions of errors are simultaneously estimated by the pseudo-likelihood estimation(P-LE) method. Simulated annealing, a global optimization technique, is adapted to minimize the log likelihood of the weighted residuals. The P-LE model was then applied to a hypothetical site where stage-discharge data were generated by incorporating various errors. Results of the P-LE model show reduced error values and narrower confidence intervals than those of the common log-transform linear least squares(LT-LR) model. Also, the limit of water levels for segmentation of discharge rating curve is estimated in the process of P-LE using the Heaviside function. Finally, model performance of the conventional log-transformed linear regression and the developed model, P-LE are computed and compared. After statistical simulation, the developed method is then applied to the real data sets from 5 gauge stations in the Geum River basin. It can be suggested that this developed strategy is applied to real sites to successfully determine weights taking into account error distributions from the observed discharge data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.397-404
• /
• 2020

The military tactical vehicle currently being operated is manufactured by improving the parts of commercial vehicles. In addition, the power supply system is applied by installing a separate converter inside the communication room to secure the operating environment of communication equipment. On the other hand, due to electromagnetic radiation noise, there are problems in frequent noise and deterioration in communication sensitivity during wireless communication in vehicles. To improve these, an advanced power supply system is applied, which is also equipped with an alternator to receive power required for communication equipment reducing broadband electromagnetic radiation noise. An additionally installed alternator, which is located in the engine room, is separated from the communication room where communication equipment is operated and is expected to reduce the effect of electromagnetic radiation noise generated from the power supply system. To verify these, a broadband radiation test was performed on a previous and advanced one. As a result, the broadband radiation noise of vehicles with an applied advanced power supply system satisfied all of the domestic vehicle safety standards and reduced in most of the sections except for some frequencies compared to previous typed vehicles. In particular, broadband radiation noise was decreased by up to 10.751 dB𝜇V/m in the vertical sections in 170 to 200 MHz on the right side of the vehicle.

• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2005

This study was conducted to establish a comprehensive guideline for grading system of poultry meat cuts. Slaughter and further processed houses were divided into large(>70,000 heads/day), middle($50,000\~25,000$ heads/day), and small scale(<25,000 heads/day), and the production managers were asked by the Questionnaire. Most poultry meat cuts produced by larger- and middle-slaughter house were consumed by dealers, franchisee and department store in increasing order, whereas further processed poultry meat cuts(small scale) provided meals for the students in the high amount. The packaging step was best f3r the determination of grading in the large slaughter house. This survey indicated that two or more grades were proper to determine the grading in the middle slaughter house, however only two grades were proper for the others. Freshness, bruise, wound, trimming and the inclusion of foreign materials affected to the grading. Poultry meat cuts were accepted for the grading in large-slaughter house, but whole poultry carcass was accepted for the grading in the others. Most managers agreed with that the grading system was only applied for the amounts requested. They also suggested that the grading system of poultry meat cuts were necessary in near future, even though it was not urgent to apply.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.93-100
• /
• 1985

Five winter and five spring wheat cultivars of diverse genetic backgrounds were evaluated to examine different developmental responses in terms of stages of the life cycle and grain yield when grown under the different planting dates. Greatest difference in growth and developmental patterns of the winter and spring wheat cultivars occurred in stem elongation, booting, inflorescence emergence and anthesis. The growth stage of stem elongation was found to exhibit larger difference both among planting dates and cultivars. Winter wheat cultivars responded more than spring wheat cultivars to the different planting dates. Winter wheat 'Cho Kwang' and spring wheat 'Jugoku 81' were earlier and exhibited faster growth and development, while winter wheats 'Yamhill' and 'Hyslop' were later in growth and development, but exhibited faster grain filling and higher rate of grain filling, resulting in higher grain yields. Crosses between winter and spring wheat gene pools would result in earlier maturity and higher productivity for both winter and spring wheat cultivars. For developing early maturing wheat cultivars for multiple cropping sequences while maintaining productivity, selection for earliness trait should be started at the stem elongation stage. Furthermore, the breeding materials should be planted at several times for selection of shorter life cycle genotypes adaptable to the cropping sequences. This is due to the genotype x planting date interactions.