• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.813-816
• /
• 2011

The actuation and leakage tests of solenoid valve for propellant tank pressurization system have been conducted. The response time of solenoid valve manufactured is satisfactory to perform requirement. However, leakage was found at the upper part seat of relief valve inside solenoid valve. Solenoid valve was disassembled in order to discover leakage causes. We found out that the upper seat of relief valve was damaged. Through this study, the development possibility of propellant tank pressurization solenoid valve was confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.723-725
• /
• 2010

Calculation program to predict required pressurant mass for propellant tank was verified through flight test data. This program was already developed and verified through ground test data, but to increase reliability of program, it was compared with flight test data of KSR-III launched in 2002. Because pressurant temperature incoming to propellant tank was not measured in flight test, that was assumed in calculation program. Required pressurant mass and inside temperature of oxygen tank dome was compared. Validation of calculation program was verified by showing required pressurant mass accuracy of 6%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1051-1053
• /
• 2017

We have designed the vent relief valve to set bi-level safety pressure for oxidizer tank. The minimum cavity volume was calculated to reduce the pressure deviation, and the valve operation characteristics was analyzed by using modeling. We have a plan to manufacture the validation model based on the analysis results.

• Composites Research
• /
• v.33 no.5
• /
• pp.309-314
• /
• 2020

Polymer composites were used to reduce the weight of the spacecraft's cryogenic propellant tank. Since these materials were directional, the permeability performance of the gas permeated or delivered in the stacking direction was an indicator directly related to performance such as tank stability and onboard fuel quantity estimation. In addition, the results of permeation measurements and optical analysis of the surface to verify the effect of the number of cycles exposed to the cryogenic-room temperature environment are included. As a result, the permeability was inversely proportional to the thickness and was proportional to the number of thermal shocks, and it was verified that the permeability performance was suitable for the cryogenic propellant tank material for the space launch vehicle.

• Composites Research
• /
• v.36 no.2
• /
• pp.132-139
• /
• 2023

A linerless composite propellant tank was designed and manufactured by using the carbon fiber-reinforced composite materials which have superior strength-to-weight ratio in order to reduce weight of the tank. In this research, we designed a sub-scale composite propellant tank with a diameter of 800 mm to withstand an MEOP of 1.7 MPa. We manufactured the boss of the tank by using the same composite materials to reduce the thermal expansion difference between the boss and the secondary-bonded composite layers of the barrel in the cryogenic environment. We used the collapsible mandrel to manufacture the tank without any liner. The mandrel was made from epoxy-based composite tooling prepregs to reduce weight of the mandrel. We manufactured the test tanks by laying up the carbon fiber fabric prepregs manually on the mandrel and then applying the autoclave cure process. We performed a proof test, a helium tightness test, a repeated pressurization test, and a burst test in room temperature. The test results demonstrate that the proposed design and manufacture process satisfies all strength requirements as well as an anti-leakage requirement.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.153.2-153.2
• /
• 2012

발사체 추진기관은 추진제 및 각종 고압가스류를 엔진으로 공급하는 기능, 지상에서 추진제를 발사체로 충전/배출하는 기능, 저온 산화제를 냉각하기 위한 순환 기능, 추진제 탱크를 가압하는 기능, 지상에서 온보드 밸브를 구동하는 기능, 내부 공간 및 라인 퍼지 기능 등을 수행한다. 이와 같은 기능을 수행하기 위해 발사체에는 타 시스템과는 별도로 추진기관 원격제어 시스템을 구성한다. 제어 시스템은 크게 온보드 시퀀스 및 추진제 탱크 압력 제어, 추진제 및 고압가스 충전/배출 제어, 발사체 기능 확인, 내부 기밀 확인 및 발사 직전까지의 상태 모니터링을 위해 구성한 지상측정시스템(GMS), 비행 중 추진기관 상태를 모니터링하기 위한 텔레메트리시스템(TMS)으로 분류한다. 본 논문에서는 일반적인 발사체 추진기관 운용 및 제어 개념을 제어 기능, 시스템 구성, 작동 원리의 단계로 사례와 함께 제시하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.654-657
• /
• 2011

For the successful development of korean exploraton program, KARI started development of ground test model for lunar lander from last year. In order to secure core technology for space propulsion system, Koreanization of propellant tank is proceeding and it will be used for final assembly and test for ground test model. In this paper, the development result of titanum tank shell and verification test result was presented.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.71-71
• /
• 2004

KSLV-I 추진기관 기체공급계는 상부의 산화제 탱크로부터 나온 산화제 주배관이 하부의 연료탱크를 관통하여 엔진공급계로 이어지도록 구성되어 있다. 연료탱크에는 산화제 배관의 관통을 위한 tunnel이 구성되어 있으며 배관과 tunnel은 일정한 간격을 유지하게 된다. 배관과 연료탱크 사이의 열전달을 줄이기 위하여 산화제 배관에 단열재를 적용할 수 있으나, 이 경우 배관의 운송, 조립시에 handling이 힘들게 되고, 특히 발사체에 조립된 후에 발생하는 단열재의 파손 및 성능감소에 대한 유지보수가 불가능하다. (중략)

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.77-81
• /
• 2012

In a cryogenic propellant tank the pressurant is contracted due to heat loss and the propellant itself evaporates. On a restartable propulsion system such phenomena are more intensive because the propellant contacts with the pressurant on the larger surface during the coast flight. Such heat and mass transfer phenomena should be considered for estimating the amount of pressurant. On the hypothesis that the heat and mass transfer quasi-equilibrium is achieved during the coast flight, the calculation process of the equilibrium pressure is presented. On the process the amount of loaded helium on the Falcon-1 second stage is calculated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.201-205
• /
• 2011

In a cryogenic propellant tank the pressurant is contracted due to heat loss and the propellant itself evaporates. On a restartable propulsion system such phenomena are more intensive because the propellant contacts with the pressurant on the larger surface during the coast flight. Such heat and mass transfer phenomena should be considered for estimating the amount of pressurant. On the hypothesis that the heat and mass transfer quasi-equilibrium is achieved during the coast flight, the calculation process of the equilibrium pressure is presented. On the process the amount of loaded helium on the Falcon-1 second stage is calculated.