• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.69-77
• /
• 2005

To optimize and limit the axial length of the baffle of the KSR-III engine, stability rating tests using pulse gun as one of artificial disturbance devices have been done. Generally a rocket engine can be considered to be dynamically stable if a certain imposed external perturbation or pressure oscillation in rocket combustion chamber could be suppressed within a short time period. Decay time and other parameters for the evaluation of stabilization ability of an engine to external perturbation have been analyzed to quantify stabilization capacity of engine, in other words, dynamic stability margin. Baffle not covering flame zone enough which can be considered as collision region of injector wasn't be able to suppress external perturbation sufficiently. The limit of combustion stability margin of engine is assumed to be 50 mm length baffle of the KSR-III engine.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.39.4-40
• /
• 2009

이 연구의 목적은 고해상도 합성개구레이더 센서를 탑재한 관측위성의 운용요구사항에 맞춰 임무기간 동안 관측 목표지역을 주기적으로 반복하고 지상궤적을 $\pm2km$ 범위 내에서 안정성을 갖도록 유지 조정하는 궤도제어 알고리즘 연구를 수행하는데 있다. 기존에 수행되어 왔던 지상궤적에 대한 오차를 해석적으로 계산하여 궤도를 유지 조정하는 방법이 아닌 기준궤도에 대하여 상대좌표계에서 표현된 위성의 실제 접촉궤도를 기준궤도와 직접적으로 비교하여 목표궤적을 유지 조정하는 알고리즘을 연구하였다. 이를 위해 첫째, 고해상도 관측위성의 운용요구사항을 만족하는 계획된 목표궤도인 기준궤도를 설계하였다. 기본적으로 기준궤도는 임무 설계 시 완전한 주기성이 고려된 최대한 실제에 가까운 궤도이기 때문에 지구중력장 모델만을 고려하여 간략하게 설계하였다. 둘째, 실제의 인공위성의 궤도는 계획된 기준궤도를 유지해야 하지만 시간에 따라 섭동력의 영향을 받아 계획된 궤도로부터 벗어나게 된다. 기준궤도로부터 실제궤도가 얼마나 벗어나는지에 대한 정량적 분석을 위해 지구 중력장, 달-태양 중력, 대기저항력, 태양복사압, 조석력 등과 같은 다양한 섭동력의 영향에 대한 분석을 수행하였다. 셋째, 반경방향(radial), 진행방향(along-track), 교차방향(cross-track)의 세 방향의 성분으로 구성된 우주공간오차(Space Error) 개념을 적용하여, 투영된 지상궤적에 상응하는 오차를 계산하는 것 보다 안정적으로 오차를 계산하였다. 또한 운용요구사항에 따라 허용된 범위 내에서 궤도를 유지하기 위해 GVE(Gauss Variation Equation)을 이용한 궤도조정을 수행하였다. 섭동력의 분석 결과로부터 지구대기저항력, 달-태양 중력으로 인해 가장 두드러지는 장반경과 궤도이심률의 변화를 조정하기 위해, 임무에 사용되는 추력기의 연료 효율을 고려하여 동결궤도가 유지될 수 있는 최적의 위도이각에서 In-plane에 대한 궤도조정만을 수행하여 장반경과 이심률을 동시에 조정하였다. 지구대기와 태양활동의 영향으로 시간에 따른 장반경의 변화율에 따라 궤도조정 주기를 가지는 것을 알 수 있었고, 이 변화율 때문에 생기는 우주공간오차의 증가를 보정하여 위성의 지상궤적을 목표범위 안에서 유지할 수 있었다.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.42-49
• /
• 2017

The solid rocket motor(SRM) consists of a motor case, igniter, propellants, nozzle, insulation, controller, and driving device. The liquid rocket propulsion systems(LRPSs) cools the nozzle by the fuel and oxidizer but SRM does not cool the nozzle. The nozzle of SRM is high temperature condition and high velocity condition so occurs the erosion by combustion gas. This erosion occurs the change of nozzle throat and reduces thrust performance of rocket. The material of Rocket nozzle is minimization of erosion and insulation effect and endure the shear force, high temperature and high pressure. The purpose of this study is to investigate the erosion characteristics of solid rocket nozzles by each combustion time. Through the structure inspection of Graphite and C-C composite, identify the characteristics of the microstructure before and after erosion.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.87-93
• /
• 2013

The conceptual design lunar lander demonstrator has been developed to use as a test bed for advanced spacecraft technologies and to test a prototype planetary lander capable of vertical takeoff and landing. Size of the lunar lander demonstrator is the same as that of lunar lander conceptually designed, however, the weight of lunar lander demonstrator is designed in 1/6 scale in consideration of gravity difference between moon and earth. The thruster clustering and virtual flight test were performed in the demonstrator fixed on the ground. The demonstrator ground test has been conducted for two months in the test site for the solid motor combustion of the Goheung Flight Center. The purposes of ground test of demonstrator are to demonstrate and verify essential electronics, propulsion system, control algorithm, embedded software, structure and system operation technologies before developing the flight model lander. This paper is described about the virtual flight test including test configuration, test aims and test facilities

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.33-45
• /
• 2019

In this study, numerical simulations were performed to investigate the steady-state characteristics of a symmetric pintle nozzle by varying the position of the pintle and the altitude. The pintle nozzle shape was used in a linear pintle nozzle that had been analyzed prior to the study, and the boundary conditions of the chamber were considered to be according to the propellant burn-back characteristics. A software was used to perform a verification analysis of the square nozzle, pintle nozzle, and high-altitude conditions with an appropriate analytical technique. The pintle position had three different nozzle throat area conditions-: fully closed, half open, and fully open, and the altitude was set at 0, 5, and 20 km. The study compared the thrust, pintle drive load, and static stability at each condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1087-1094
• /
• 2016

The responsibility of the vehicle holding device (VHD) is to hold the launch vehicle while it is stayed on launch pad and release the holding mechanism to allow a lift-off of launch vehicle at a moment of lift-off. During a release of the holding mechanism, in order to prevent the Ka doing a doing a doing mode which is vertical oscillation of entire liquid propellant and very severe for vehicle structure, gradual release of holding force is required. Also, a release operation of all 4 VHD should be synchronized very precisely. In this study, to comply the "gradual release and synchronized operation requirement", concept of VHD hydraulic system using an accumulator, pyro valve and orifice to control speed of hydraulic cylinder is proposed instead of using complicated hydraulic components. Then through multi-body dynamic analysis and computational hydraulic analysis, a size of orifice to meet a target speed of hydraulic cylinder is calculated. Through this study, simple and reliable VHD hydraulic system complying requirements is designed.