• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.370-376
• /
• 2004

The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it ispossible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way (uni-directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two-stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1950-1956
• /
• 1997

An engineering goal in vibration and noise professionals is to develope quiet machines at the preliminary design stage, and various numerical techniques such as FEM, SEA or BEM are one of the schemes toward the goal. In this paper, the research has been focused on the sensitivity effect of mesh sizes for FEM application so that the optimum size of the mesh that leads to engineering solution within acceptable computing time could be generated. In order to evaluate the mesh size effect, three important parameters have been examined : natural frequencies, number of modes and driving point mobility. First, several lower modes including the fundamental frequency of a 2-D plate structure have been calculated as mesh size changes. Since theoretical values of natural frequencies for a simple structure are known, the deviation between the numerical and theoretical values is obtained as a function of mesh size. The result shows that the error is no longer decreased if the mesh size becomes a quarter wavelength or smaller than that. Second, the mesh size effect is also investigated for the number of modes. For the frequency band up to 1.4 kHz, the structure should have 38 modes in total. As the mesh size reaches to the quarter wavelength, the total count in modes approaches to the same values. Third, a mobility function at the driving point is compared between SEA and FEM result. In SEA application, the mobility function is determined by the modal density and the mass of the structure. It is independent of excitation frequencies. When the mobility function is calculated from a wavelength to one-tenth of it, the mobility becomes constant if the mesh becomes a quarter wavelength or smaller. We can conclude that dynamic parameters, such as eigenvalues, mode count, and mobility function, can be correctly estimated, while saving the computing burden, if a quarter wavelength (.lambda./4) mesh is used. Therefore, (.lambda./4) mesh is recommended in structural vibration analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1691-1696
• /
• 2010

The efforts of reflecting the system's uncertainties in design step have been made and robust optimization or reliabilitybased design optimization are examples of the most famous methodologies. The statistical moments of a performance function and the constraints corresponding to probability conditions are involved in the formulation of these methodologies. Therefore, it is essential to effectively and accurately calculate them. The sensitivities of these methodologies have to be determined when nonlinear programming is utilized during the optimization process. The sensitivity of statistical moments and probability constraints is expressed in the integral form and limited to the normal random variable; we aim to expand the sensitivity formulation to nonnormal variables. Additional functional calculation will not be required when statistical moments and failure or satisfaction probabilities are already obtained at a design point. On the other hand, the accuracy of the sensitivity results could be worse than that of the moments because the target function is expressed as a product of the performance function and the explicit functions derived from probability density functions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.645-653
• /
• 2020

Recently studies on how to use the UAV (Unmanned Aerial Vehicle) are actively being conducted, and the National Geographic Information Institute published the 『Work Guidelines for Public Surveying of Unmanned Aerial Vehicles』. However, the guidelines do not provide the optimum shooting conditions required for each application. In this study, we tried to find the suitable shooting conditions for the production of 3D (Three-dimensional) spatial information and orthophoto. To this end, 45 experiments were conducted by various altitudes, overlaps, and camera angles within an above ground level of 150m. For evaluating the 3D modeling by shooting conditions, point densities of 9 verification areas were analyzed, and to evaluate the orthophotos, 1/1,000 digital maps were compared. Considering the quality of the output and the processing time for precise 3D construction, an altitude of 50m, an overlap of 70~80%, and a camera angle of 80~90° are suitable as shooting conditions, and an altitude of 100m and camera angle of 80~90° are suitable for orthophoto generation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.6
• /
• pp.95-109
• /
• 2006

Elliptic Curve Cryptosystem (ECC) is suitable for resource-constrained devices such as smartcards, and sensor motes because of its short key size. This paper presents an efficient multi-scalar multiplication algorithm which is the main component of the verification procedure in Elliptic Curve Digital Signature Algorithm (ECDSA). The proposed algorithm can make use of a precomputed table of variable size and provides an optimal efficiency for that precomputed table. Furthermore, the given scalar is receded on-the-fly so that it can be merged with the main multiplication procedure. This can achieve more savings on memory than other receding algorithms. Through experiments, we have found that the optimal sizes of precomputed tables are 7 and 15 when uP+vQ is computed for u, v of 163 bits and 233 bits integers. This is shown by comparing the computation time taken by the proposed algorithm and other existing algorithms.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.309-309
• /
• 2022

특정 극치사상 자료에 대한 특성 분석 시 수문자료에 대한 빈도해석은 일반적으로 단일 확률 변수를 기준으로 이루어지는 단변량 해석 방법이 활용된다. 그러나 두 가지 이상의 변량이 서로 상관성을 가지는 경우 다변량 빈도해석이 요구되며, 이를 단변량으로 해석하는 경우 재현기간의 과소추정 등의 문제점이 발생할 수 있다. 최근 이러한 점을 개선하기 위하여 다변량 빈도해석에 관한 연구가 지속적으로 진행되고 있다(Kwon and Lall, 2016; Vaziri et al., 2018). 특히, 가뭄의 경우, 강도(intensity)뿐만 아니라 지속기간, 심도도 매우 중요한 인자로 고려되고 있다. 특히, 가뭄지속기간과 심도의 경우 두 인자 간의 상관성이 매우 크기 때문에 단변량(univariate) 가뭄빈도해석 보다 다변량으로(multivariate) 가뭄빈도해석을 수행하는 것이 가뭄위험도 평가 측면에서 유리하다고 알려져 있다(Shiau and Shen, 2001; Kim et al., 2017). 따라서 이 둘을 결합한 빈도 해석을 위해 Copula Function을 이용한 다변량 빈도 해석에 관한 연구들이 활발히 진행되고 있다. 홍수의 경우 지속시간별 연최대강수량 계열을 이용한 빈도해석 과정이 지침으로 정립되어 수자원 설계 실무에서 활용되고 있으나, 가뭄은 실무에서 활용할 수 있는 지침 및 분석 도구가 없는 실정이다. 이에 환경부와 국가가뭄정보분석센터에서는 '20년도에 단변량 가뭄빈도 해석을 위한 프로그램을 제작·배포하였다. 본 연구에서는 가뭄의 특성을 대변하는 상관도 높은 두 인자인 가뭄 심도(severity)와 가뭄 지속기간(duration)이라는 두 가지 특성을 함께 고려해 이변량(bivariate) 가뭄 빈도를 해석할 수 있는 도구를 개발하는 것을 목표로, 다양한 확률분포형을 이용한 최적 주변 확률분포형 선정과 최신 Copula Function들을 이용한 최적 결합확률분포 추정을 통해 신뢰도 높은 2변량 가뭄빈도 해석을 수행할 수 있는 프로그램을 제작하였으며, 테스트 버전 배포 등을 거쳐 누구나 사용할 수 있도록 공개할 예정이다.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.19-25
• /
• 2005

This study was performed to investigate the optimum density for the intensive mass production of cyclopoid copepod, Paracyclopina nana in terms of nauplii and adults production. Effect of three development stages on the fecundity of adult female for nauplii production, survival rate of P. nana nauplii with different initial nauplii culture densities for adults production and cannibalistic feeding behavior of P. nana was examined, respectively. The fecundity of adult female by different female, copepodite ana nauplii density in 2 ml water volume decreased with the density of adult female, but was not affected by the density of either copepodite or nauplii. The average daily nauplii production for a adult female in 8 L water volume was $2.3{\times}10^5$ individuals with the incubation density of 7 adult females/ml, and this average value was significantly higher than those values of 0.6 to $1.7\times10^5$ individuals with the incubation density of 1,3,5, 10 adult females/ml (P<0.05). Survival rate of P. nana nauplil with different initial nauplii culture densities in 5 L vessels for 15 days were 32.7, 30.7, 28.9 and $23.0\%$ with the culture density of 50, 100, 150 and 200 inds./ml, respectively, but these were significantly higher than those of values 19.7 and $18.4\%$ with the culture density of 250 and 300 inds./ml (P<0.05). Cannibalistic behavior of P. nana adults on their offspring was observed, but the behavior decreased when phytoplankton was supplemented though there was no statistical difference (P>0.05). These results may indicate that P. nana is adaptable to the hatchery conditions and this species is cultured at the high densities. Optimum culture density for nauplii and adults production of P. nana were 7 adult females/ml and 200 nauplii/ml, respectively.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.441-450
• /
• 2013

The purpose of this study was optimization of the conditions for mixing different amounts of red radish (Raphanus sativus L.) sprout powder, butter, and sugar when baking domestic wheat cookies prepared using red radish sprout powder. Response surface methodology, with a central composite design comprising 5 levels and 3 variables, was used to identify the best possible combination of amounts of red radish sprout powder ($X_1$), butter ($X_2$), and sugar ($X_3$). The physical and mechanical properties of each of the 20 samples analyzed, including color L (p<0.001), color a (p<0.01), color b (p<0.001), spread ratio (p<0.001), and hardness (p<0.01), differed significantly. The results of sensory evaluations, including color (p<0.001), appearance (p<0.001), texture (p<0.001), flavor (p<0.01), taste (p<0.001), and overall quality (p<0.001) also differed significantly among the samples. The optimal compositional ratios were 5.15 g for the red radish sprout powder, 64.84 g for the butter, and 47.18 g for the sugar.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.185-191
• /
• 2012

Most of Korean farms have been developed in the semi-closed bay, and its position is very vulnerable to the coastal contamination due to the long term and the high density. So, mariculture management is very essential for the sustainable aquaculture. Some of the specific ways would be the assessment of the optimal stocking density for mariculture management zone and this has to consider both the suitable site selection and the assessment of ecological carrying capacity. Habitat suitability index(0.0 totally unsuitable habitat, 1.0 optimum habitat) and ecological indicator(Filtration pressure indicator) was used to assess the stocking density for oyster farms in Geoje-Hansan Bay. Geoje Bay showed the higher habitat suitability index value 0.75 than Hansan Bay 0.53, indicating that Geoje Bay is more suitable for oyster farming. Ecological indicator showed different stocking density according to the coastal characteristics in Geoje-Hansan Bay. Consequently, it is desirable that the stocking density in Geoje Bay should reduce average 40% and Hansan Bay, average 60% than present, in order to meet the ecological carrying capacity. The assessment of the stocking density could solve various problems such as the coastal contamination, environmental aggravation and the productivity decrease and this study could be a scientific basis to establish the policies for mariculture management.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.47-47
• /
• 2011

에너지자원이 부족하여 에너지 해외의존도가 약 80% 이상인 우리나라의 특성상 에너지 해외의존도를 경감시키고 에너지부족 상황을 안정시키기 위하여 국내의 부존에너지를 최대한 활용하는 것이 필요하다. 또한 지구온난화에 대처하는 범세계적인 규제에 대비하기 위하여, 청정에너지를 적극 개발하여 에너지자립도를 향상시켜야 한다. 신재생에너지 중 하나인 소수력은 친환경적인 청정에너지 중 하나로 다른 대체 에너지원에 비해 높은 에너지 밀도를 가지고 있어 개발 가치가 큰 부존자원으로 평가되고 있다. 그리고 소수력은 여러측면의 사회적 환경적 이점으로 최근에는 선진국에서도 매우 큰 관심을 끌고 있으며, 에너지 자원이 빈약하여 대부분 석유수입에 의존하는 우리나라는 지역에너지로 소수력을 적극 개발하여야 한다. 소수력 부존량이 풍부한 우리나라는 1982년에 소수력 개발 활성화 방안이 공표되면서부터 정부주도 하에 소수력 발전소 건설에 관한 연구를 적극적으로 지원하게 되었다. 대수력과 비교하여 소수력의 장점으로는 비교적 짧은 계획 및 시공기간, 낮은 투자비용, 개인이나 기업을 통한 투자참여, 주위 인력이나 자재를 이용한 쉬운 설치, 적은 환경적인 피해 등이 있다. 이와 같이 청정에너지 중 하나인 소수력의 개발과 활용을 위하여 IT 기술을 접목한 다양한 응용시스템 구축이 진행되고 있다. 특히, 한국에너지기술연구원에서는 신재생에너지 개발 및 보급 확대를 목표로 2006년에 신재생에너지 자원지도시스템을 구축하였으며, 이를 웹상에서 제공하고 있다. 소수력 발전시설의 적극적인 활용을 위해서는 초기설계시 장기유출 특성분석을 통해 해당유역의 수자원을 최대로 활용하고, 지형적인 요소를 이용하여 전기의 생산이 최대가 되도록 하는 최적설계가 이루어 져야 한다. 따라서 본 연구에서는 소수력 발전시설의 최적설계를 위해 한강수계 258개 표준유역 중 섬강합류점에 대하여 자원지도를 활용하여 연평균유량을 추정한 후 소수력 자원량을 산정하였고, 그 결과로 시설용량과 연간전기생산량은 각각 1,633kW, 6,224MWh로 산정되었다. 또한 유출량의 미계측 유역에서의 소수력 발전성능을 예측하기 위한 방법으로 Weibull 분포의 특성화 방법을 선택하여 그 적용성을 검토하였다. 섬강합류점 표준유역 내에 위치하고 있는 목계관측소, 앙성관측소에서의 10개년(1999~2008) 강우자료를 바탕으로 유황곡선을 작성하여 상관관계분석을 실시한 결과 목계관측소에서 0.994701, 앙성관측소에서 0.992616으로 관측치와 계산값이 상당히 유사한 것으로 나타났다.