• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.820-828
• /
• 2008

In order to achieve high coding efficiency, H.264/AVC video coding standard adopts the techniques such as variable block size coding, motion estimation with quarter-pel precision, multiple reference frames, rate-distortion optimization, and etc. However, these coding methods have a defect to greatly increase the complexity for motion estimation. Particularly, from multiple reference frame motion estimation, the computational burden increases in proportion to the number of the searched reference frames. Therefore, we propose the method to reduce the complexity by controlling the number of the searched reference frames in motion estimation. Proposed algorithm uses the optimal reference frame information in both $P16{\times}16$ mode and the adjacent blocks, thus omits unnecessary searching process in the rest of inter modes. Experimental results show the proposed method can save an average of 57.31% of the coding time with negligible quality and bit-rate difference. This method also can be adopted with any of the existing motion estimation algorithm. Therefore, additional performance improvement can be obtained.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.37-42
• /
• 2008

This study is focused on the numerical predictions for different smoke-control ventilation modes for the subway fire. Smoke-control ventilation mode in the domestic platform is that exhausting for the smoke detected zones while supplying air or stopping any ventilation for other zones in the platform. Three cases of smoke control ventilation modes are considered. First and second case are present running smoke control mode in Korea. The third is that smoke-control ventilation fans equipped in the platform are operated in first 4 minute(platform evacuation time, NFPA130) since then the fans equipped in the platform are stopped and the fans equipped in the tunnels are operated. Distributions of heat, carbon monoxide and visible range are compared at a height of 1.7m(passenger breath/sight height) above the platform. The numerical results show that air supply fan operation in the platform causes the smoke disturbance and a rapid spread of the smoke. The switch-operation with fans in both the platform and tunnel are better than operation with only platform fans in smoke rejection efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2071-2078
• /
• 2009

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP (Quantization Parameter) for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 35 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we use a linear model because there is a linear inverse proportional relationship between the output bandwidth and the optimal intial QP. Model parameters of the model are determined depending on the spatial complexity of the first frame. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.347-353
• /
• 2021

In this study, we presented a novel size optimization framework to control the linear buckling temperature and several buckling modes of plates, by optimizing thickness values of composite structures for practical engineering applications. Predicting the buckling temperature and mode shape of structures is a vital research topic in engineering to achieve structural stability. However, optimizing designs of engineering structures through engineering intuition is challenging. To address this limitation, we proposed a method that combines finite element simulation and size optimization. Based on the idea that the structural buckling temperature and mode shape of a plate are affected by the thickness of the structure, the thickness values of the nodes of the target structure were set as the design variables in this optimization method; and the buckling temperature values, and buckling mode shapes were set as the objective functions. This size optimization method enabled the determination of optimal thickness distributions, to induce the desired buckling temperature values and mode shapes. The validity of the proposed method was verified in terms of their buckling temperature values and buckling mode shapes, using several numerical examples of rectangular composite structures.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.10
• /
• pp.677-684
• /
• 2015

It is often necessary to predict the vibration patterns of the structures from the signals of finite number of vibration sensors. This study presents the optimal placement of vibration sensors by applying the genetic algorithm and the modal expansion method. The modal expansion method is used to estimate the vibration response of the whole structure. The genetic algorithm is used to estimate the optimal placement of vibration sensors. Optimal sensor placement can be obtained so that the fitness function is minimized in the genetic algorithm. This paper discusses the comparison of the performances of two types of fitness functions, modal assurance criteria(MAC) and condition number( CN). As a result, the estimation using MAC shows better performance than using CN.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.598-601
• /
• 2011

스케일러블 비디오 코딩은 레이어간 예측 기능을 이용하여 시뮬케스트 코딩에 비해 코딩 효율을 높인다. 하지만 스케일러블 비디오 코딩의 레이어간 예측으로는, 인트라 픽셀(inta pixel). 모션 정보(motion vector information), 레지듀얼(residual)등의 예측이 수행되는데, 이는 많은 계산 시간을 소요하게 되며, 시뮬케스트에 비해 코딩 시간이 증가하게 된다. 특히 인코더의 경우, 가장 최적의 모드를 선택하기 위하여, 기존 H.264 AVC에서 사용하는 예측을 수행한 뒤, 부가적으로 스케일러블 비디오 코딩의 레이어간 예측을 수행하기 때문에, 하나의 영상이 많은 레이어를 포함할수록 인코딩에 의한 계산부하가 매우 증가하게 된다. 본 논문에서는 이를 해결하기 위해, 멀티 코어 이용하여 레이어별로 병렬처리가 가능하도록 하는 스케일러블 비디오 인코더의 구조를 제안한다. 이로써 하나의 영상이 포함하는 레이어의 수가 증가함에 따라 발생하는 인코딩 계산 부하를 줄이도록 하였다. 그리하여 본 논문에서 제안하는 구조를 적용하였을 때, 2개의 공간영역으로의 스케일러빌리티를 가지는 영상들에 대해서는 평균 24.8%의 속도가 향상되었고, 1개의 공간영역과 1개의 화질 영역으로의 스케일러빌리티를 가지는 영상들에 대해서는 평균 82%의 속도 향상을 보였다.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.340-347
• /
• 2015

HEVC (High Efficiency Video Coding) achieves high coding efficiency by employing a quadtree-based coding unit (CU) block partitioning structure and various prediction units (PUs), and the determination of the best CU partition structure and the best PU mode based on rate-distortion (R-D) cost. However, the computation complexity of encoding also dramatically increases. In this paper, to reduce such encoding computational complexity, we propose three fast PU mode decision methods based on encoding information of upper depth as follows. In the first method, the search of PU mode of the current CU is early terminated based on the sub-CBF (Coded Block Flag) of upper depth. In the second method, the search of intra prediction modes of PU in the current CU is skipped based on the sub-Intra R-D cost of upper depth. In the last method, the search of intra prediction modes of PU in the lower depth's CUs is skipped based on the sub-CBF of the current depth's CU. Experimental results show that the three proposed methods reduce the computational complexity of HM 14.0 to 31.4%, 2.5%, and 23.4% with BD-rate increase of 1.2%, 0.11%, and 0.9%, respectively. The three methods can be applied in a combined way to be applied to both of inter prediction and intra prediction, which results in the complexity reduction of 34.2% with 1.9% BD-rate increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11C
• /
• pp.1098-1107
• /
• 2005

The emerging H.264/AVC video coding standard improves coding performance significantly by adopting many advanced techniques. This is achieved at the expense of great increasing encoder complexity. Specifically the intra prediction using RDO examines all possible combinations of coding modes, which depend on spatial directional correlation with adjacent blocks. For 4${\times}$4 luma blocks, there are 9 modes, and for 16${\times}$16 luma and 8${\times}$8 chroma blocks, there are 4 modes, respectively. Therefore the number of mode combinations for each macroblock is 592. This paper presents a method to reduce the RDO complexity using simple directional masks and neighboring modes. According to the proposed method, we reduce the number of mode combinations to 132 at the most. Experimental results show the proposed method reduces the encoding time up to $70\%$ with negligible loss of PSNR and bitrate increase compared to the H.264/AVC exhaustive search.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.514-521
• /
• 2016

The High Efficiency Video Coding (HEVC) standard provides superior coding efficiency by utilizing highly flexible block structure and more diverse coding modes. However, rate-distortion optimization (RDO) process for the decision of optimal block size and prediction mode requires excessive computational complexity. To alleviate the computation load, this paper proposes a new moment-based fast CU size decision algorithm for intra coding in HEVC. In the proposed method, moment values are computed in each CU block to estimate the texture complexity of the block from which the decision on an additional CU splitting procedure is performed. Unlike conventional methods which are mostly variance-based approaches, the proposed method incorporates the third-order moments of the CU block in the design of the fast CU size decision algorithm, which enables an elaborate classification of CU types and thus improves the RD-performance of the fast algorithm. Experimental results show that the proposed method saves 32% encoding time with 1.1% increase of BD-rate compared to HM-10.0, and 4.2% decrease of BD-rate compared to the conventional variance-based fast algorithm.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.281-284
• /
• 2009

Acoustic tuning frequency of quarter-wave resonators is investigated numerically to suppress combustion instability in a liquid rocket engine. A quarter-wave resonator is adopted, which was designed from the cold acoustic test for optimal damping condition. First, in a model combustion chamber scaled down from a full-scale chamber, reactive flow filed is analyzed numerically and acoustic-pressure responses are examined. Next, thermodynamic properties in the resonators are predicted. Based on the data, frequency tuning method is studied. The optimum tuning length of each resonator is proposed and thereby, sufficient damping is produced.