• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.389-401
• /
• 2003

The purpose of this study is to develop an algorithm, which can be designed the optimal sections of the composite framed structures constituted with the beams and the columns consisted of H type of steel section and concrete considering the reliability index. The optimized problem or the composite framed structures is formulated with the objective function and the constraints taking the section sizes as the design variables. The objective functions are constituted by the total costs of constructions. Also, the constraints are derived by considering the reliability index of section stress and allowable stress. The algorithm optimized the section of the composite framed structures utilizes the SUMT method using the modified Newton-Raphson direction method. The optimizing algorithm developed in this study is applied to the numerical examples with respecting a one-bay, one-story composite framed structure and a one-bay five-story one for the practical utilization of design on the composite framed structures using the reliability indices$({\beta})$ three and zero. In addition, their numerical results are compared and analyzed to examine the possibility of optimization the applicability, and the convergence this algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2012

Improving operating frequency of processors is no longer today's issues; a multiprocessor technique which integrates many processors has received increasing attention. Currently, high-performance processors that integrate 64 or 128 cores are developing for large data processing over 2, 4, or 8 processor cores. This paper proposes an optimal many-core processor for synthesizing guitar sounds. Unlike the previous research in which a processing element (PE) was assigned to support one of guitar strings, this paper evaluates the impacts of mapping different numbers of PEs to one guitar string in terms of performance and both area and energy efficiencies using architectural and workload simulations. Experimental results show that the maximum area energy efficiencies were achieved at PEs=24 and 96, respectively, for synthesizing guitar sounds with sampling rate of 44.1kHz and 16-bit quantization. The synthesized sounds were very similar to original guitar sounds in their spectra. In addition, the proposed many-core processor was 1,235 and 22 times better than TI TMS320C6416 in area and energy efficiencies, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.35-43
• /
• 2001

A method is newly presented to synthesize the modal impedances satisfying the desired coupling factor of a reflective (or hack ward) coupled-line. The synthesis is achieved by optimal perturbations of repeating null points of lobes inherent to the solution of the first order nonlinear differential equation for coupling. It is based on the synthesis method of nonlinear source distribution functions for the prescribed space factor pattern in the one-dimensional array antenna. Here, the conventional synthesis method for the even distribution function is extended to the odd case. Resulting modal impedances will have continuously varying profiles. The design procedure of asymmetrical and symmetrical couplers corresponding to the even and odd distribution functions, is examplified to show the generalization and the simplicity of the proposed method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.4
• /
• pp.16-25
• /
• 2005

In this paper, we proposed a novel algorithm combined simulated annealing and genetic algorithms for designing optimal binary phase computer generated hologram. In the process of genetic algorithm searching by block units, after the crossover and mutation operations, simulated annealing algorithm searching by pixel units is inserted. So, the performance of BPCGH was improved. Computer simulations show that the proposed combined iterative algorithm has better performance than the simulated annealing algorithm in terms of diffraction efficiency

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.177-184
• /
• 2008

In this study, in order to reduce appeals regarding vibration and noise from blasts, the optimum delay-time of the electronic detonator, which can minimize blast vibration, is found through blast-waveform composition and blasting simulation, and we have developed the full-face Sequential Blasting Method based on the studies of damping properties of full-face section blasting. The optimum delay-time of the electronic detonator and Full-face Sequential Blasting Method using electronic detonator was applied to the Gyeongbu high-speed railway construction site to test the feasibility of this method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.388-389
• /
• 2012

Current offshore wind power towers are made of steel. As the capacity of wind power increases, the tower structures become higher. Steel structures have buckling problem and their increased slenderness ratios make them weak against buckling and vibration. In this study, double skinned composite tubular (DSCT) offshore wind power tower was proposed and its optimum design method was suggested. Fiber reinforced polymer (FRP) and steel were considered as material of the tubes. And both materials satisfied the required capacity.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1192-1197
• /
• 2000

Si-Mg 첨가물, LiOH, NaOH로부터 제조한 슬러리의 수열반응으로 헥토라이트 점토를 합성하였다. 수열합성의 온도와 반응시간에 따른 합성헥토라이트 점토의 화학적 조성과 결정형태를 조사하였고, 합성헥토라이트 0.2~1.0% 수분산액의 투과도와 입경을 UV-VIS 분광광도계와 투과전자현미경으로 각각 측정하였다. 합성헥토라이트 수분산액의 투과도와 유동성은 25$0^{\circ}C$, 6시간의 합성조건과 Si/Mg/Li/Na=8.0/5.4/0.6/0.6의 조성에서 최대치를 나타내었고, Mg/Si=5.4/8.0의 슬러리 조성으로부터 합성된 헥토라이트(Hec-6)가 최적의 투명성과 용액점도를 나타내었다. 또한 Hec-6의 수분산액은 높은 전단력에서 낮은 점도의 졸상으로 전화됨으로서 요변성을 나타내었고, 1.0% Hec-6/sodium carboxymethyl cellulose(50/50) 혼합용액은 전단력이 1.0 s$^{-1}$ 이상에서 1.0% Hec-6 수분산액보다 더욱 높은 점도를 나타냄으로서 점도의 상승효과가 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.293-298
• /
• 1998

Allithiamine was synthesized when thiamine was mixed with fresh garlic extract made with ethanol at a alkali medium. Allithiamine was isolated and purified using solvents such as ethyl acetate, diethyl ether and benzene. Purified allithiamine was identified by determination of melting point, elemental analyzer and LC/Thermospray/Mass-spectrometer. On the other hand, synthetic conditions of allithiamine from fresh garlic, pH, temperature and ratio of garlic to ethanol were investigated. Synthetic rates of allithiamine under alkali conditions were rapidly increased while those under acidic conditions very slowly increased. The synthetic rates of allithiamine increased as temperature increased, but decreased above $70^{\circ}C$ as reaction time increased. There was no significant difference in synthetic rate of allithiamine when garlic was mixed above 4 times of ethanol. Therefore, optimum condition of pH, temperature and ratio of garlic to ethanol for synthesis of allithiamine were 8, $60^{\circ}C$ and 1 : 4, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.47-47
• /
• 2018

단일벽 탄소나노튜브 (Single-walled carbon nanotubes, SWNTs)는 우수한 물리적 화학적 특성을 갖고 있어 나노전자소자, 투명전도막, 에너지소자, 센서 등 다양한 분야로의 응용이 기대되고 있다. 열화학기상증착(Thermal chemical vapor deposition, TCVD)법은 SWNTs의 합성 공정이 간단하고 공정변수의 제어가 용이하다는 장점이 있어 SWNT 합성 연구에 가장 널리 사용되어 왔다. 일반적으로 금속 촉매의 박막이 증착된 합성 기판은 온도가 가장 높고 비교적 균일성이 보장되는 TCVD 반응기의 중심부에 위치시키고 공정변수를 변화해가며 연구를 진행해 왔다. 본 실험실에서는 수평형 반응기 전역에 합성 기판을 설치하여 SWNTs를 합성한 결과, 반응기의 중심보다 뒤의 영역에서 SWNTs의 합성 수율이 상당히 증가하는 것을 초기실험을 통해 확인하였다. 본 연구에서는 SWNTs 합성 시 가스 유량과 합성 온도를 변화시켰을 때 기판 위치에 따른 SWNTs의 수율 및 물성변화를 구체적으로 조사하였다. 합성가스와 촉매로는 메탄가스와 철 박막을 사용하였으며, 합성 수율의 변화는 고분해능 주사전자현미경을 이용하여 관찰하였다. 그리고 합성된 SWNTs의 형태 및 결정성은 라만분광법과 원자간힘현미경을 이용하여 평가하였다. 결과적으로, 진행하였던 모든 합성 조건에서 반응기 중심보다 뒤의 영역에서 더 고수율의 SWNTs가 합성되었으며, 최적 합성 조건의 SWNTs 면밀도는 99% 이상이었다. 본 연구의 결과는 CVD 공정을 이용하는 다양한 저차원 나노 소재의 합성에도 적용될 수 있을 것으로 사료되며, 추후 이에 대한 연구가 필요하다.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.