• Title/Summary/Keyword: 최소 자승

Search Result 1,179, Processing Time 0.023 seconds

Estimation of MPI Parallel Processing Parameters for Large Antenna Design Based on the Least Squares (최소자승법을 활용한 대형 안테나 설계용 MPI 병렬처리 특성 추정)

  • Cho, Yong-Heui
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2016.05a
    • /
    • pp.57-58
    • /
    • 2016
  • MOR(Metal-Only Reflectarray) 안테나와 같은 밀리미터파용 대형 안테나 계산을 병렬화하기 위해 사용하는 MPI 특성을 예측하기 위한 방법으로 최소자승법 활용을 제안한다. 기존의 Amdahl 법칙에 Compute Node 간의 통신 속도를 추가한 수정된 Amdahl 법칙을 사용하여 9개의 Compute Node의 MPI 특성을 예측하였다. 이를 이용해 현재 구조에 적합한 최적의 Compute Node 개수도 제시하였다.

  • PDF

Estimation of Rotor Resistance and Stator Transient Inductance Using RLS in Stator Flux Oriented Control of Induction Motors (유도전동기 고정자 자속 기준 벡터제어에서 순환 최소자승법을 이용한 회전자 저항 및 고정자 과도 인덕턴스 추정)

  • Lee, Dae-Han;Choi, Jong-Woo
    • Proceedings of the KIPE Conference
    • /
    • 2019.11a
    • /
    • pp.100-101
    • /
    • 2019
  • 본 논문은 유도전동기 고정자 자속 기준 벡터제어에서, 슬립 관계식과 순환 최소자승법을 이용하여 회전자 저항 및 고정자 과도 인덕턴스를 동시에 추정하는 알고리즘을 제안한다. 모의실험을 수행하여, 추정 회전자 저항과 고정자 과도 인덕턴스가 제안된 방법에 의해 각각 실제 값에 수렴함을 보인다.

  • PDF

Determination of Minimum Eigenvalue in a Continuous-time Weighted Least Squares Estimator (연속시간 하중최소자승 식별기의 최소고우치 결정)

  • Kim, Sung-Duck
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.41 no.9
    • /
    • pp.1021-1030
    • /
    • 1992
  • When using a least squares estimator with exponential forgetting factor to identify continuous-time deterministic system, the problem of determining minimum eigenvalue is described in this paper. It is well known fact that the convergence rate of parameter estimates relies on various factors consisting of the estimator and especially, theirproperties can be directly affected by all eigenvalues in the parameter error differential equation. Fortunately, there exists only one adjusting eigenvalue in the given estimator and then, the parameter convergence rates depend on this minimum eigenvalue. In this note, a new result to determine the minimum eigenvalue is proposed. Under the assumption that the input has as many spectral lines as the number of parameter estimates, it can be proven that the minimum eigenvalue converges to a constant value, which is a function of the forgetting factor and the parameter estimates number.

  • PDF

High Dynamic Range Image Display Combining Weighted Least Squares Filtering with Color Appearance Model (가중 최소자승 필터링과 색 표현 모델을 결합한 넓은 동적 영역 이미지 표현)

  • Piao, Mei-Xian;Lee, Kyung-Jun;Wee, Seung-Woo;Jeong, Jechang
    • Journal of Broadcast Engineering
    • /
    • v.21 no.6
    • /
    • pp.920-928
    • /
    • 2016
  • Recently high dynamic range imaging technique is hot issue in computer graphic area. We present a progressive tone mapping algorithm, which is based on weighted least squares optimization framework. Our approach combines weighted least squares filtering with iCAM06 model. To show more perceptual high dynamic range images in conventional display, we decompose high dynamic range image into base layers and detail layers. The base layers are obtained by using weighted least squares filter. Then, we adopt chromatic adaption function and non-linear compression function to deal with base layers. Only the base layers reduce contrast, and preserving detail. The image quality assessment shows that our tone mapped image is more similar to original high dynamic range image. Moreover, the subjective result shows our algorithm produces more reliable and pleasing image.

Fast Simulation of Output Voltage for High-Shock Piezoresistive Microaccelerometer Using Mode Superposition Method and Least Square Method (모드중첩법 및 최소자승법을 통한 고충격 압저항 미소가속도계의 출력전압 해석)

  • Han, Jeong-Sam;Kwon, Ki-Beom
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.36 no.7
    • /
    • pp.777-787
    • /
    • 2012
  • The transient analysis for the output voltage of a piezoresistive microaccelerometer takes a relatively high computation time because at least two iterations are required to calculate the piezoresistive-structural coupled response at each time step. In this study, the high computational cost for calculating the transient output voltage is considerably reduced by an approach integrating the mode superposition method and the least square method. In the approach, data on static displacement and output voltage calculated by piezoresistive-structural coupled simulation for three acceleration inputs are used to develop a quadratic regression model, relating the output voltage to the displacement at a certain observation point. The transient output voltage is then approximated by a regression model using the displacement response cheaply calculated by the mode superposition method. A high-impact microaccelerometer subject to several types of acceleration inputs such as 100,000 G shock, sine, step, and square pulses are adopted as a numerical example to represent the efficiency and accuracy of the suggested approach.

A Prediction Model for Coating Thickness Based on PLS Model and Variable Selection (부분최소자승법과 변수선택을 이용한 코팅두께 예측모델 개발)

  • Lee, Hye-Seon;Lee, Young-Rok;Jun, Chi-Hyuck;Hong, Jae-Hwa
    • The Korean Journal of Applied Statistics
    • /
    • v.23 no.2
    • /
    • pp.295-304
    • /
    • 2010
  • Coating thickness is one of target variables in quality control process in steel industry. To predict coating thickness and to control quality of anti-fingerprint steel coils, ultraviolet-visible spectra are measured. We propose a variable-interval selection procedure based on the variable importance in projection in partial least square model. Using the proposed variable interval selection method, prediction performance gets better in the reduced model than the full model with full spectra absorbance. It is also shown that the first differencing as a data preprocessing technique does work well for the prediction of coating thickness.

The Influence of Assay Error on Amikacin Pharmacokinetics the Nonlinear Least Square Regression and Bayesian Analysis in Gastric Cancer Patients (위암환자에서 비선형최소자승 회귀분석과 베이시안 분석에 의한 아미카신의 약물동태에 분척오차의 영향)

  • Choi, Jun-Shik;Burm, Jin-Pil
    • Korean Journal of Clinical Pharmacy
    • /
    • v.18 no.1
    • /
    • pp.11-17
    • /
    • 2008
  • 아미카신은 그람음성균 감염에 사용하는 아미노글리코사이드계 항생제로 이독성 및 신독성 등의 부작용과 큰 개인차로 혈중농도 모니터를 통한 투여계획이 필요한 약물이다. 본 연구에서는 16명의 위암환자에서 비선형최소자승 회귀분석과 베이시안 분석에 의한 아미카신의 약물동태에 분석오차의 영향을 연구하였다. 약물투여는 아미카신 7.5 mg/kg을 30분에 걸쳐 12시간 간격으로 등속 주입하였으며, 혈액 채취는 정상상태에 도달되었다고 판단되는 첫 약물투여 72시간 후에, 약물 주입 5분전과 주입이 끝난 뒤 30분과 2시간에서 세차례 채취하였다. 혈청중 약물농도는 형광편광면역법으로 측정하였다. 분석오차를 위해 0, 5, 15, 30, 60 및 $80\;{\mu}g/ml$에 해당하는 아미카신 혈중농도(C)을 네차례 측정하여 각 혈중농도의 표준편차 (SD)을 구하였다 아미카신 분석오차를 위한 다항식이 $SD=0.3017+(0.00538C)+(0.00112C^2)$, $R^2=0.974$이었다 이 식에서 구한 SD 값으로 분석시 가중치를 주었을 때, 비선형최소자승 회귀분석에 의한 아미카신의 약물동태학적 파라메타($V_d$, $K_{el}$, $K_{slpoe}$, $t_{1/2}$)에 유의성있는 영향을 주었으나, 베이시안 분석에 의한 아미카신의 약물동태학적 파라메타에는 영향이 없었다. 이 다항식에 의한 분석오차를 비선형최소자승 회귀분석에 의한 아미카신 약물동태학적 파라메타 분석시 적절히 사용하면 안전하고 효율적인 투여계획을 할 수 있다.

  • PDF

The Influence of Assay Error on Tobramycin Pharmacokinetics using the Nonlinear Least Square Regression and Bayesian Analysis in Gastric Cancer Patients (위암환자에서 비선형 최소자승 회귀분석과 베이시안 분석에 의한 토브라마이신의 약물동태에 분석오차의 영향)

  • Choi, Jun-Shik;Burm, Jin-Pil
    • Korean Journal of Clinical Pharmacy
    • /
    • v.19 no.1
    • /
    • pp.43-49
    • /
    • 2009
  • 토브라마이신은 그람음성균 감염에 사용하는 아미노글리코사이드계 항생제로 이독성 및 신독성 등의 부작용과 큰 개인차로 혈중농도 모니터를 통한 투여계획이 필요한 약물이다. 본 연구에서는 16명의 위암환자에서 비선형 최소자승 회귀분석과 베이시안 분석에 의한 토브라마이신의 약물동태에 분석오차의 영향에 대하여 연구하였다. 약물투여는 토브라마이신 1-2 mg/kg을 30분에 걸쳐 8시간 간격으로 등속 주입하였으며, 혈액 채취는 정상상태에 도달되었다고 판단되는 첫 약물투여 72시간 후에, 약물 주입 5분전과 주입이 끝난 뒤 30분과 2시간에서 세차례 채취하였다. 혈청중 약물농도는 형광편광면역법으로 측정 하였다. 분석오차를 위해 0, 1, 2, 4, 8 및 12 ${\mu}g/mL$에 해당하는 토브라마이신 혈중농도(C)을 네차례 측정하여 각 혈중농도의 표준편차 (SD)을 구하였다. 토브라마이신 분석오차를 구하기 위한 다항식이 SD = 0.0224+0.0540C+0.00173C2, $R^2$ = 0.935이었다. 이 식에서 구한 SD 값으로 분석시 가중치를 주었을 때, 비선형 최소자승 회귀분석에 의한 토브라마이신의 약물동태학적 파라메타 ($V_d$, $K_{el}$, $K_{slpoe}$, $t_{1/2}$)에 유의성있는 영향을 주었으나, 베이시안 분석에 의한 토브라마이신의 약물동태학적 파라메타에는 영향이 없었다. 이 다항식으로 부터 구한 분석오차를 토브라마이신의 비선형 최소자승 회귀분석을 이용한 약물동태 연구 및 파라메타 분석에 적용하여 좀 더 정확한 투여용량을 결정할 수 있으며, 더 나아가 토브라마이신 약물동태 시뮬레이션 연구에 응용할 수 있다.

  • PDF

A RLS-based Convergent Algorithm for Driving Characteristic Classification for Personalized Autonomous Driving (자율주행 개인화를 위한 순환 최소자승 기반 융합형 주행특성 구분 알고리즘)

  • Oh, Kwang-Seok
    • Journal of the Korea Convergence Society
    • /
    • v.8 no.9
    • /
    • pp.285-292
    • /
    • 2017
  • This paper describes a recursive least-squares based convergent algorithm for driving characteristic classification for personalized autonomous driving. Recently, various researches on autonomous driving technology have been conducted for level 4 fully autonomous driving. In order for commercialization of the autonomous vehicle, personalized autonomous driving is required to minimize passenger's insecureness to the autonomous vehicle. To address this problem. this study proposes mathematical model that represents driving characteristics and recursive least-squares based algorithm that can estimate the defined characteristics. The actual data of two drivers has been used to derive driving characteristics and the hypothesis testing method has been used to classify two drivers. It is shown that the proposed algorithms can derive driving characteristics and classify two drivers reasonably.

Least Square Prediction Error Expansion Based Reversible Watermarking for DNA Sequence (최소자승 예측오차 확장 기반 가역성 DNA 워터마킹)

  • Lee, Suk-Hwan;Kwon, Seong-Geun;Kwon, Ki-Ryong
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.11
    • /
    • pp.66-78
    • /
    • 2015
  • With the development of bio computing technology, DNA watermarking to do as a medium of DNA information has been researched in the latest time. However, DNA information is very important in biologic function unlikely multimedia data. Therefore, the reversible DNA watermarking is required for the host DNA information to be perfectively recovered. This paper presents a reversible DNA watermarking using least square based prediction error expansion for noncodng DNA sequence. Our method has three features. The first thing is to encode the character string (A,T,C,G) of nucleotide bases in noncoding region to integer code values by grouping n nucleotide bases. The second thing is to expand the prediction error based on least square (LS) as much as the expandable bits. The last thing is to prevent the false start codon using the comparison searching of adjacent watermarked code values. Experimental results verified that our method has more high embedding capacity than conventional methods and mean prediction method and also makes the prevention of false start codon and the preservation of amino acids.